Dne petek, 08. julij 2022 ob 12:52:28 CEST je Andre Przywara napisal(a): > Hi, > > only some minor changes this time in the .dtsi, addressing the comments, > many thanks to Jernej and Samuel for that! Also adding the R-b tags. > > This keeps the TF-A reserved memory node, as a compromise for a smoother > user experience. > > This is on top of kernel.org's sunxi/dt-for-5.20, to get the new I2C > fallback compatible. The series can be found here: > https://github.com/apritzel/linux/commits/h616-v13 > > For a complete changelog, see below. > > Thanks! > Andre > > ================== > This series gathers patches to support the Allwinner H616 SoC. This is > a rather uninspired SoC (Quad-A53 with the usual peripherals), but > allows for some cheap development boards and TV boxes, and supports > up to 4GB of DRAM. > > Some DT binding patches are sprinkled throughout the series, to add > the new compatible names right before they are used. > Eventually we get the .dtsi for the SoC in patch 3, and the .dts for > the OrangePi Zero2 board[1] later, followed by the .dts for the X96 Mate > TV box[2] afterwards. > > U-Boot and Trusted Firmware support is now merged in released versions, > it allows booting via FEL or SD card, also you can TFTP kernels in on > the OrangePi Zero 2 board. > > Many thanks to Jernej for his tremendous help on this, also for the > awesome input and help from the #linux-sunxi IRC channel. > > The whole series (including the prerequisites) can also be found here: > https://github.com/apritzel/linux/commits/h616-v13 > > Happy reviewing! > > Cheers, > Andre > > [1] https://linux-sunxi.org/Orange_Pi_Zero_2 > [2] https://linux-sunxi.org/X96_Mate Fixed emac compatible and applied, thanks! Best regards, Jernej