Ping, I would like to get patch 1 & 2 into v5.20. Regards, Alexander Am Mittwoch, 22. Juni 2022, 13:49:46 CEST schrieb Alexander Stein: > Hello, > > this patch set adds support for TQMa8MPxL on mainboard MBa8MPxL. This > already includes some pinctrl and/or peripheral configurations which are > not yet in use, e.g. PWM for PWM fan, backlight for LVDS panel, etc. > Also note. this only supports MBa8MPxL Rev.2xx, Revision 1xx is > not supported! > > Changes in v2: > * Added a-b in patch1 > * Changed LED label to function + color > * Renamed some nodes > * Added more pwm-backlight properties > * Added comment about missing display compatible > * Added display power-supply regulator > * Fixed pinctl settings for HDMI mux > * Added patch3 as WIP to show the LVDS overlay > > Best regards, > Alexander > > Alexander Stein (2): > arm64: dts: freescale: add initial device tree for TQMa8MPQL with > i.MX8MP > [DNI/WIP] arm64: dts: freescale: Add LVDS overlay for TQMa8MPxL > > Markus Niebel (1): > dt-bindings: arm: add TQMa8MPxL board > > .../devicetree/bindings/arm/fsl.yaml | 12 + > arch/arm64/boot/dts/freescale/Makefile | 3 + > .../imx8mp-tqma8mpql-mba8mpxl-lvds.dts | 44 ++ > .../freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 708 ++++++++++++++++++ > .../boot/dts/freescale/imx8mp-tqma8mpql.dtsi | 284 +++++++ > 5 files changed, 1051 insertions(+) > create mode 100644 > arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dts create > mode 100644 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
