\#pwm-cells for the Icicle kit's fabric PWM was incorrectly set to 2 &
blindly overridden by the (out of tree) driver anyway. The core can
support inverted operation, so update the entry to correctly report its
capabilities.
Fixes: 72560c6559b8 ("riscv: dts: microchip: add fpga fabric section to icicle kit")
Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
.../dts/microchip/mpfs-icicle-kit-fabric.dtsi | 2 +-
.../dts/microchip/mpfs-tysom-m-fabric.dtsi | 18 ++
.../riscv/boot/dts/microchip/mpfs-tysom-m.dts | 185 ++++++++++++++++++
3 files changed, 204 insertions(+), 1 deletion(-)
create mode 100644 arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi
create mode 100644 arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
index 0d28858b83f2..e09a13aef268 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
@@ -8,7 +8,7 @@ core_pwm0: pwm@41000000 {
compatible = "microchip,corepwm-rtl-v4";
reg = <0x0 0x41000000 0x0 0xF0>;
microchip,sync-update-mask = /bits/ 32 <0>;
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
clocks = <&fabric_clk3>;
status = "disabled";
};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi
new file mode 100644
index 000000000000..98f642e83ad4
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2022 Microchip Technology Inc */
+
+// #include "dt-bindings/mailbox/miv-ihc.h"
+
+/ {
+ fabric_clk3: fabric-clk3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <62500000>;
+ };
+
+ fabric_clk1: fabric-clk1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts b/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts
new file mode 100644
index 000000000000..0b664c591255
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Original all-in-one devicetree:
+ * Copyright (C) 2020-2022 - Aldec
+ * Rewritten to use includes:
+ * Copyright (C) 2022 - Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-tysom-m-fabric.dtsi"
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define MTIMER_FREQ 1000000
+
+/ {
+ model = "Aldec TySOM-M-MPFS250T";
+ compatible = "aldec,tysom-m-mpfs250t", "microchip,mpfs";
+
+ aliases {
+ ethernet0 = &mac0;
+ ethernet1 = &mac1;
+ serial0 = &mmuart0;
+ serial1 = &mmuart1;
+ serial2 = &mmuart2;
+ serial3 = &mmuart3;
+ serial4 = &mmuart4;
+ gpio0 = &gpio0;
+ gpio1 = &gpio2;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+
+ cpus {
+ timebase-frequency = <MTIMER_FREQ>;
+ };
+
+ ddrc_cache_lo: memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x2e000000>;
+ status = "okay";
+ };
+
+ ddrc_cache_hi: memory@1000000000 {
+ device_type = "memory";
+ reg = <0x10 0x00000000 0x0 0x40000000>;
+ status = "okay";
+ };
+
+ soc {
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ status = "okay";
+
+ led0 {
+ gpios = <&gpio1 23 1>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ ina219: ina219@45 {
+ status = "okay";
+ compatible = "ti,ina219";
+ reg = <0x45>;
+ shunt-resistor = <0x7d0>;
+ };
+};
+
+&gpio1 {
+ interrupts = <27 28 29 30 31 32 33 47 35 36 37 38 39 40 41 42 43 44 45 46 34 48 49 50>;
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ phy-mode = "gmii";
+ phy-handle = <&phy0>;
+
+};
+
+&mac1 {
+ status = "okay";
+ phy-mode = "gmii";
+ phy-handle = <&phy1>;
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ ti,fifo-depth = <0x01>;
+ };
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,fifo-depth = <0x01>;
+ };
+};
+
+&mbox {
+ status = "okay";
+};
+
+&mmc {
+ max-frequency = <200000000>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ no-1-8-v;
+ disable-wp;
+ status = "okay";
+};
+
+&mmuart1 {
+ status = "okay";
+};
+
+&mmuart2 {
+ status = "okay";
+};
+
+&mmuart3 {
+ status = "okay";
+};
+
+&mmuart4 {
+ status = "okay";
+};
+
+&refclk {
+ clock-frequency = <125000000>;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+ pseFlash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a11", "jedec,spi-nor";
+ status = "okay";
+ reg = <0x0>;
+ spi-max-frequency = <10000000>;
+
+ partition@test-0 { /* test purposes */
+ label = "qspi-test-0";
+ reg = <0x00000000 0x00800000>;
+ };
+ partition@test-1 { /* test purposes */
+ label = "qspi-test-1";
+ reg = <0x00800000 0x00800000>;
+ };
+ partition@test-2 { /* test purposes */
+ label = "qspi-test-2";
+ reg = <0x01000000 0x00800000>;
+ };
+ partition@test-3 { /* test purposes */
+ label = "qspi-test-3";
+ reg = <0x01800000 0x00800000>;
+ };
+ };
+};
+
+&syscontroller {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ dr_mode = "host";
+};
--
2.36.1
