Switch to level interrupt for mcp251xfd. This will make sure no
interrupts are lost.
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@xxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 2841c6bfe3a9..6491e745b3fa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -195,7 +195,7 @@ &ecspi3 {
can1: can@0 {
compatible = "microchip,mcp251xfd";
clocks = <&clk40m>;
- interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_FALLING>;
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_int>;
reg = <0>;
--
2.34.1
