[PATCH v1] arm64: dts: rk3399: i2s: switch BCLK to GPIO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We discoverd that the state of BCLK on, LRCLK off and SD_MODE on
may cause the speaker melting issue. Removing LRCLK while BCLK
is present can cause unexpected output behavior including a large
DC output voltage as described in the Max98357a datasheet.

In order to:
  1. prevent BCLK from turning on by other component.
  2. keep BCLK and LRCLK being present at the same time

This patch adjusts the device tree to allow BCLK to switch
to GPIO func before LRCLK output, and switch back during
LRCLK is output.

Signed-off-by: Judy Hsiao <judyhsiao@xxxxxxxxxxxx>
---
 .../boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 10 ++++++++
 arch/arm64/boot/dts/rockchip/rk3399.dtsi      | 25 ++++++++++++++++++-
 2 files changed, 34 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index 913d845eb51a..df1647e9d487 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -766,6 +766,16 @@ &i2s0_8ch_bus {
 		<4 RK_PA0 1 &pcfg_pull_none_6ma>;
 };
 
+&i2s0_8ch_bus_bclk_off {
+	rockchip,pins =
+		<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none_6ma>,
+		<3 RK_PD1 1 &pcfg_pull_none_6ma>,
+		<3 RK_PD2 1 &pcfg_pull_none_6ma>,
+		<3 RK_PD3 1 &pcfg_pull_none_6ma>,
+		<3 RK_PD7 1 &pcfg_pull_none_6ma>,
+		<4 RK_PA0 1 &pcfg_pull_none_6ma>;
+};
+
 /* there is no external pull up, so need to set this pin pull up */
 &sdmmc_cd_pin {
 	rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index fbd0346624e6..311c8394cc84 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1662,8 +1662,9 @@ i2s0: i2s@ff880000 {
 		dma-names = "tx", "rx";
 		clock-names = "i2s_clk", "i2s_hclk";
 		clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>;
-		pinctrl-names = "default";
+		pinctrl-names = "bclk_on", "bclk_off";
 		pinctrl-0 = <&i2s0_8ch_bus>;
+		pinctrl-1 = <&i2s0_8ch_bus_bclk_off>;
 		power-domains = <&power RK3399_PD_SDIOAUDIO>;
 		#sound-dai-cells = <0>;
 		status = "disabled";
@@ -2407,6 +2408,19 @@ i2s0_8ch_bus: i2s0-8ch-bus {
 					<3 RK_PD7 1 &pcfg_pull_none>,
 					<4 RK_PA0 1 &pcfg_pull_none>;
 			};
+
+			i2s0_8ch_bus_bclk_off: i2s0-8ch-bus-bclk-off {
+				rockchip,pins =
+					<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
+					<3 RK_PD1 1 &pcfg_pull_none>,
+					<3 RK_PD2 1 &pcfg_pull_none>,
+					<3 RK_PD3 1 &pcfg_pull_none>,
+					<3 RK_PD4 1 &pcfg_pull_none>,
+					<3 RK_PD5 1 &pcfg_pull_none>,
+					<3 RK_PD6 1 &pcfg_pull_none>,
+					<3 RK_PD7 1 &pcfg_pull_none>,
+					<4 RK_PA0 1 &pcfg_pull_none>;
+			};
 		};
 
 		i2s1 {
@@ -2418,6 +2432,15 @@ i2s1_2ch_bus: i2s1-2ch-bus {
 					<4 RK_PA6 1 &pcfg_pull_none>,
 					<4 RK_PA7 1 &pcfg_pull_none>;
 			};
+
+			i2s1_2ch_bus_bclk_off: i2s1-2ch-bus-bclk-off {
+				rockchip,pins =
+					<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>,
+					<4 RK_PA4 1 &pcfg_pull_none>,
+					<4 RK_PA5 1 &pcfg_pull_none>,
+					<4 RK_PA6 1 &pcfg_pull_none>,
+					<4 RK_PA7 1 &pcfg_pull_none>;
+			};
 		};
 
 		sdio0 {
-- 
2.37.0.rc0.161.g10f37bed90-goog




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux