On 30/06/2022 11:01, Xiangsheng Hou wrote:
Add axi clock since the driver change to DMA mode which need
to enable axi clock. And change spi clock to 26MHz as default.
Signed-off-by: Xiangsheng Hou <xiangsheng.hou@xxxxxxxxxxxx>
Applied, thanks!
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 40d7b47fc52e..e603170100af 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -790,9 +790,12 @@ thermal: thermal@1100b000 {
nor_flash: spi@1100d000 {
compatible = "mediatek,mt8173-nor";
reg = <0 0x1100d000 0 0xe0>;
+ assigned-clocks = <&topckgen CLK_TOP_SPI_SEL>;
+ assigned-clock-parents = <&clk26m>;
clocks = <&pericfg CLK_PERI_SPI>,
- <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
- clock-names = "spi", "sf";
+ <&topckgen CLK_TOP_SPINFI_IFR_SEL>,
+ <&pericfg CLK_PERI_NFI>;
+ clock-names = "spi", "sf", "axi";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
