Dear Alexandre,
Thank you for your comment and response.
I will refine again and reply below.
Thanks.
Best Regards,
Mia
Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx> 於 2022年7月7日 週四 下午3:52寫道：
>
> On 07/07/2022 15:17:28+0800, Mining Lin wrote:
> > Dear Alexandre,
> >
> > Thank you for your comments.
> > I will refine and reply below.
> >
> > Thanks.
> > Best Regards,
> > Mia
> >
> > Medad Young <medadyoung@xxxxxxxxx> 於 2022年7月7日 週四 下午1:31寫道：
> > >
> > > Hello Alexandre,
> > >
> > > Thanks for your comments.
> > > I add Mining Lin <mimi05633@xxxxxxxxx> into this mail thread,
> > > and she is going to follow up this RTC driver.
> > > She will be in charge of maintaining this driver.
> > >
> > > Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx> 於 2022年6月25日 週六 凌晨4:26寫道：
> > > >
> > > > Hello,
> > > >
> > > > Please run ./scripts/checkpatch.pl --strict on your patch, there are a
> > > > bunch of issues.
> > > >
> > [Mia] I will run ./scripts/checkpatch.pl --strict on my patch to fix issues.
> >
> > > > On 27/05/2022 16:46:47+0800, medadyoung@xxxxxxxxx wrote:
> > > > > +static int nct3018y_set_alarm_mode(struct i2c_client *client, bool on)
> > > > > +{
> > > > > + int err, flags;
> > > > > +
> > > > > + dev_dbg(&client->dev, "%s:on:%d\n", __func__, on);
> > > > > +
> > > > > + flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CTRL);
> > > > > + if (flags < 0) {
> > > > > + dev_err(&client->dev,
> > > > > + "Failed to read NCT3018Y_REG_CTRL\n");
> > > >
> > > > You should cut down on the number of error messages, they are usually
> > > > not useful as the user doesn't have any specific action after getting
> > > > one of them apart from trying the action once again. Also, this will
> > > > make your code shorter. dev_dbg is fine.
> > > >
> > [Mia] I will modify dev_err to dev_dbg if there is an error and nothing to do.
> >
> > > > > +/*
> > > > > + * In the routines that deal directly with the nct3018y hardware, we use
> > > > > + * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
> > > > > + */
> > > > > +static int nct3018y_rtc_read_time(struct device *dev, struct rtc_time *tm)
> > > > > +{
> > > > > + struct i2c_client *client = to_i2c_client(dev);
> > > > > + unsigned char buf[10];
> > > > > + int err;
> > > > > +
> > > >
> > > > You should still return an error if the time is invalid there but without
> > > > an error message.
> > > >
> > [Mia] I will verify the time by rtc_valid_tm(tm).
> >
>
> No, I meant checking NCT3018Y_REG_ST as was done in the previous
> revisions of the series
>
[Mia] I will check NCT3018Y_REG_ST as was done in the previous revisions.
> > > > > +static struct clk *nct3018y_clkout_register_clk(struct nct3018y *nct3018y)
> > > > > +{
> > > > > + struct i2c_client *client = nct3018y->client;
> > > > > + struct device_node *node = client->dev.of_node;
> > > > > + struct clk *clk;
> > > > > + struct clk_init_data init;
> > > > > + int flags, err;
> > > > > +
> > > > > + /* disable the clkout output */
> > > > > + flags = 0;
> > > > > + err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CLKO, flags);
> > > >
> > > > BTW, this introduces a glitch in the clock output if the clock is
> > > > actually used. Maybe you could just rely on the CCF core to disable this
> > > > clock when there are no users.
> > > >
> > [Mia] Do you mean there is no need to disable the clock output here?
> >
>
> The CCF will disable the clock at boot time if there are no users
>
[Mia] I will remove disable clock output. Thank you so much for your reply.
> --
> Alexandre Belloni, co-owner and COO, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
