When changing the MAC address, in addition to updating the dev_addr in the net_device structure, this patch also update the MAC address registers (high and low) of the Ethernet controller with the new MAC. The address stored in these registers is used for IEEE 802.3x Ethernet flow control, which is already enabled. Signed-off-by: Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx> Acked-by: Arnd Bergmann <arnd@xxxxxxxx> --- drivers/net/ethernet/marvell/pxa168_eth.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index 46b86714e9d7..6917904409b8 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -60,6 +60,8 @@ #define PORT_COMMAND 0x0410 #define PORT_STATUS 0x0418 #define HTPR 0x0428 +#define MAC_ADDR_LOW 0x0430 +#define MAC_ADDR_HIGH 0x0438 #define SDMA_CONFIG 0x0440 #define SDMA_CMD 0x0448 #define INT_CAUSE 0x0450 @@ -609,11 +611,22 @@ static int pxa168_eth_set_mac_address(struct net_device *dev, void *addr) struct sockaddr *sa = addr; struct pxa168_eth_private *pep = netdev_priv(dev); unsigned char oldMac[ETH_ALEN]; + u32 mac_h, mac_l; if (!is_valid_ether_addr(sa->sa_data)) return -EADDRNOTAVAIL; memcpy(oldMac, dev->dev_addr, ETH_ALEN); memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN); + + mac_h = sa->sa_data[0] << 24; + mac_h |= sa->sa_data[1] << 16; + mac_h |= sa->sa_data[2] << 8; + mac_h |= sa->sa_data[3]; + mac_l = sa->sa_data[4] << 8; + mac_l |= sa->sa_data[5]; + wrl(pep, MAC_ADDR_HIGH, mac_h); + wrl(pep, MAC_ADDR_LOW, mac_l); + netif_addr_lock_bh(dev); update_hash_table_mac_address(pep, oldMac, dev->dev_addr); netif_addr_unlock_bh(dev); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
