From: Peng Fan <peng.fan@xxxxxxx> Add i.MX8MP NoC node to make the interconnect i.MX8MP driver could work. Currently dynamic frequency scaling of the i.MX8MP NoC has not been supported, only NoC initial settings are configured by interconnect driver. Signed-off-by: Peng Fan <peng.fan@xxxxxxx> --- V4: Georgi has merged the V3 driver and bindings patches. So only resend this patch. Per Georgi's comments: - Drop syscon from compatbile - Drop the header inclusion Seems I not see this patch in patchwork or mailist, maybe sent failed. So gave a resend of V4. V3: https://lore.kernel.org/linux-arm-kernel/20220703091132.1412063-1-peng.fan@xxxxxxxxxxx/ I not list the full change log, since this is only a minor patch arch/arm64/boot/dts/freescale/imx8mp.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index eb2d516278eb..42ed8ee08548 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -1019,6 +1019,27 @@ eqos: ethernet@30bf0000 { }; }; + noc: interconnect@32700000 { + compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc"; + reg = <0x32700000 0x100000>; + clocks = <&clk IMX8MP_CLK_NOC>; + #interconnect-cells = <1>; + + operating-points-v2 = <&noc_opp_table>; + + noc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200M { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-1000M { + opp-hz = /bits/ 64 <1000000000>; + }; + }; + }; + aips4: bus@32c00000 { compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; -- 2.25.1
