Re: [PATCH RFC 1/2] dt-bindings: interrupt-controller: sifive,plic: Document Renesas RZ/Five SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 24, 2022 at 10:59:40AM +0100, Lad, Prabhakar wrote:
> Hi Rob,
> 
> Thank you for the review.
> 
> On Sun, Jun 5, 2022 at 3:23 PM Rob Herring <robh@xxxxxxxxxx> wrote:
> >
> > On Tue, May 24, 2022 at 06:22:13PM +0100, Lad Prabhakar wrote:
> > > Document Renesas RZ/Five (R9A07G043) SoC.
> > >
> > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > > ---
> > >  .../sifive,plic-1.0.0.yaml                    | 38 +++++++++++++++++--
> > >  1 file changed, 35 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > index 27092c6a86c4..78ff31cb63e5 100644
> > > --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > @@ -28,7 +28,10 @@ description:
> > >
> > >    While the PLIC supports both edge-triggered and level-triggered interrupts,
> > >    interrupt handlers are oblivious to this distinction and therefore it is not
> > > -  specified in the PLIC device-tree binding.
> > > +  specified in the PLIC device-tree binding for SiFive PLIC (and similar PLIC's),
> > > +  but for the Renesas RZ/Five Soc (AX45MP AndesCore) which has NCEPLIC100 we need
> > > +  to specify the interrupt type as the flow for EDGE interrupts is different
> > > +  compared to LEVEL interrupts.
> > >
> > >    While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
> > >    "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
> > > @@ -57,6 +60,7 @@ properties:
> > >            - enum:
> > >                - allwinner,sun20i-d1-plic
> > >            - const: thead,c900-plic
> > > +      - const: renesas-r9a07g043-plic

Also, this should be 'renesas,r9...'

> > >
> > >    reg:
> > >      maxItems: 1
> > > @@ -64,8 +68,7 @@ properties:
> > >    '#address-cells':
> > >      const: 0
> > >
> > > -  '#interrupt-cells':
> > > -    const: 1
> > > +  '#interrupt-cells': true
> > >
> > >    interrupt-controller: true
> > >
> > > @@ -91,6 +94,35 @@ required:
> > >    - interrupts-extended
> > >    - riscv,ndev
> > >
> > > +if:
> > > +  properties:
> > > +    compatible:
> > > +      contains:
> > > +        const: renesas-r9a07g043-plic
> > > +then:
> > > +  properties:
> > > +    clocks:
> > > +      maxItems: 1
> > > +
> > > +    resets:
> > > +      maxItems: 1
> > > +
> > > +    power-domains:
> > > +      maxItems: 1
> >
> > Did you test this? The above properties won't be allowed because of
> > additionalProperties below. You need to change it to
> > 'unevaluatedProperties' or move these to the top level.
> >
> Yes I have run the dt_binding check.
> 
> So with the below diff it does complain about the missing properties.
> 
> prasmi@prasmi:~/work/renasas/renesas-drivers$ git diff
> Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> index 20ded037d444..bb14a4b1ec0a 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> @@ -130,7 +130,7 @@ examples:
>      plic: interrupt-controller@c000000 {
>        #address-cells = <0>;
>        #interrupt-cells = <1>;
> -      compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
> +      compatible = "renesas-r9a07g043-plic";
>        interrupt-controller;
>        interrupts-extended = <&cpu0_intc 11>,
>                              <&cpu1_intc 11>, <&cpu1_intc 9>,
> prasmi@prasmi:~/work/renasas/renesas-drivers$ make ARCH=riscv
> CROSS_COMPILE=riscv64-linux-gnu- dt_binding_check
>   LINT    Documentation/devicetree/bindings
>   CHKDT   Documentation/devicetree/bindings/processed-schema.json
>   SCHEMA  Documentation/devicetree/bindings/processed-schema.json
>   DTEX    Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.example.dts
>   DTC     Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.example.dtb
>   CHECK   Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.example.dtb
> /home/prasmi/work/renasas/renesas-drivers/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.example.dtb:
> interrupt-controller@c000000: #interrupt-cells:0:0: 2 was expected
>     From schema:
> /home/prasmi/work/renasas/renesas-drivers/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> /home/prasmi/work/renasas/renesas-drivers/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.example.dtb:
> interrupt-controller@c000000: 'clocks' is a required property
>     From schema:
> /home/prasmi/work/renasas/renesas-drivers/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> /home/prasmi/work/renasas/renesas-drivers/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.example.dtb:
> interrupt-controller@c000000: 'resets' is a required property
>     From schema:
> /home/prasmi/work/renasas/renesas-drivers/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> /home/prasmi/work/renasas/renesas-drivers/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.example.dtb:
> interrupt-controller@c000000: 'power-domains' is a required property
>     From schema:
> /home/prasmi/work/renasas/renesas-drivers/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> prasmi@prasmi:~/work/renasas/renesas-drivers$
> prasmi@prasmi:~/work/renasas/renesas-drivers$
> 
> Is there something I'm missing here?

You've said these properties are required, but you didn't add them.

If you don't have the above 3 properties, then it's not going to 
complain that they are present. But it will when you do add them for the 
reason I gave.

Rob



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux