Re: [RFC 3/7] mfd: devicetree: bindings: Add Qualcomm SMD based RPM DT binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Sep 29, 2014, at 7:34 PM, Bjorn Andersson <Bjorn.Andersson@xxxxxxxxxxxxxx> wrote:

> Add binding documentation for the Qualcomm Resource Power Manager (RPM)
> using shared memory (Qualcomm SMD) as transport mechanism. This is found
> in 8974 and newer based devices.
> 
> The binding currently describes the rpm itself and the regulator
> subnodes.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
> ---
> 
> Note that this patch extends the rpm dt-bindings header from [1].
> 
> [1] https://lkml.org/lkml/2014/9/22/733
> 
> .../devicetree/bindings/mfd/qcom-rpm-smd.txt       |  122 ++++++++++++++++++++
> include/dt-bindings/mfd/qcom-rpm.h                 |   36 ++++++
> 2 files changed, 158 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/qcom-rpm-smd.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm-smd.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm-smd.txt
> new file mode 100644
> index 0000000..a846101
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm-smd.txt
> @@ -0,0 +1,122 @@
> +Qualcomm Resource Power Manager (RPM) over SMD
> +
> +This driver is used to interface with the Resource Power Manager (RPM) found in
> +various Qualcomm platforms. The RPM allows each component in the system to vote
> +for state of the system resources, such as clocks, regulators and bus
> +frequencies.
> +
> +- compatible:
> +	Usage: required
> +	Value type: <string>
> +	Definition: must be one of:
> +		    "qcom,rpm-msm8974”

Why not “qcom,rpm-smd”.  I’d like to get Jeff H’s input on how what we do here for compat and distinguish the A-family RPM support vs B-family/RPM-SMD support.

> +
> +- qcom,smd-channels:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: Shared Memory Channel used for communication with the RPM
> +

This needs more details.

> +- #address-cells:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: must be 1
> +
> +- #size-cells:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: must be 0
> +
> += SUBDEVICES

As I mentioned for the the RPM binding on a-family, we should split out the devices into their own binding specs.

> +
> +The RPM exposes resources to its subnodes. The below bindings specify the set
> +of valid subnodes that can operate on these resources.
> +
> +== Switch-mode Power Supply regulator
> +
> +- compatible:
> +	Usage: required
> +	Value type: <string>
> +	Definition: must be one of:
> +		    "qcom,rpm-pm8841-smps"
> +		    "qcom,rpm-pm8941-smps"
> +
> +
> +- reg:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: resource as defined in <dt-bindings/mfd/qcom-rpm.h>
> +		    must be one of:
> +		    QCOM_RPM_PM8841_SMPS1 - QCOM_RPM_PM8841_SMPS4,
> +		    QCOM_RPM_PM8941_SMPS1 - QCOM_RPM_PM8941_SMPS3
> +
> +Standard regulator bindings are used inside switch mode power supply subnodes.
> +Check Documentation/devicetree/bindings/regulator/regulator.txt for more
> +details.
> +
> +== Low-dropout regulator
> +
> +- compatible:
> +	Usage: required
> +	Value type: <string>
> +	Definition: must be one of:
> +		    "qcom,rpm-pm8941-ldo"
> +
> +- reg:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: resource as defined in <dt-bindings/mfd/qcom-rpm.h>
> +		    must be one of:
> +		    QCOM_RPM_PM8941_LDO1 - QCOM_RPM_PM8941_LDO24
> +
> +Standard regulator bindings are used inside switch low-dropout regulator
> +subnodes.  Check Documentation/devicetree/bindings/regulator/regulator.txt for
> +more details.
> +
> +== Switch
> +
> +- compatible:
> +	Usage: required
> +	Value type: <string>
> +	Definition: must be one of:
> +		    "qcom,rpm-pm8941-switch"
> +
> +- reg:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: resource as defined in <dt-bindings/mfd/qcom/qcom-rpm.h>
> +		    must be one of:
> +		    QCOM_RPM_PM8941_LVS1 - QCOM_RPM_PM8941_LVS3,
> +		    QCOM_RPM_PM8941_MVS1 - QCOM_RPM_PM8941_MVS2
> +
> +Standard regulator bindings are used inside switch regulator subnodes.  Check
> +Documentation/devicetree/bindings/regulator/regulator.txt for more details.
> +
> += EXAMPLE
> +
> +	#include <dt-bindings/mfd/qcom-rpm.h>
> +
> +	rpm@108000 {
> +		compatible = "qcom,rpm-msm8960";
> +		qcom,smd-channels = "rpm_requests";
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		pm8941_s1: regulator-s1 {
> +			compatible = "qcom,rpm-pm8941-smps";
> +			reg = <QCOM_RPM_PM8941_SMPS1>;
> +
> +			regulator-min-microvolt = <1300000>;
> +			regulator-max-microvolt = <1300000>;
> +		};
> +
> +		pm8941_l3: pm8941-l3 {
> +			compatible = "qcom,rpm-pm8941-ldo";
> +			reg = <QCOM_RPM_PM8941_LDO3>;
> +
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1200000>;
> +		};
> +
> +	};
> +

- k

-- 
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux