Add a driver for the SMB2 charger block found in the Qualcomm PMI8998
and PM660.
Signed-off-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
---
Changes since v1:
* Renamed from qcom_smb2 to qcom_pmi8998_charger
---
drivers/power/supply/Kconfig | 9 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/qcom_pmi8998_charger.c | 1044 +++++++++++++++++++
3 files changed, 1054 insertions(+)
create mode 100644 drivers/power/supply/qcom_pmi8998_charger.c
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 1aa8323ad9f6..1fd9ad98b607 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -897,4 +897,13 @@ config BATTERY_UG3105
device is off or suspended, the functionality of this driver is
limited to reporting capacity only.
+config CHARGER_QCOM_SMB2
+ tristate "Qualcomm PMI8998 PMIC charger driver"
+ depends on MFD_SPMI_PMIC
+ depends on IIO
+ help
+ Say Y here to enable the Qualcomm PMIC Charger driver. This
+ adds support for the SMB2 switch mode battery charger found
+ in PMI8998 and related PMICs.
+
endif # POWER_SUPPLY
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index 7f02f36aea55..a39e3eda6dbd 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -108,3 +108,4 @@ obj-$(CONFIG_BATTERY_ACER_A500) += acer_a500_battery.o
obj-$(CONFIG_BATTERY_SURFACE) += surface_battery.o
obj-$(CONFIG_CHARGER_SURFACE) += surface_charger.o
obj-$(CONFIG_BATTERY_UG3105) += ug3105_battery.o
+obj-$(CONFIG_CHARGER_QCOM_SMB2) += qcom_pmi8998_charger.o
diff --git a/drivers/power/supply/qcom_pmi8998_charger.c b/drivers/power/supply/qcom_pmi8998_charger.c
new file mode 100644
index 000000000000..2ba8f83282e1
--- /dev/null
+++ b/drivers/power/supply/qcom_pmi8998_charger.c
@@ -0,0 +1,1044 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016-2019 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Linaro Ltd.
+ * Author: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
+ *
+ * This driver is for the switch-mode battery charger and boost
+ * hardware found in pmi8998 and related PMICs.
+ */
+
+#include <linux/bits.h>
+#include <linux/devm-helpers.h>
+#include <linux/iio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/minmax.h>
+#include <linux/of_irq.h>
+#include <linux/module.h>
+#include <linux/debugfs.h>
+
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+// clang-format off
+#define BATTERY_CHARGER_STATUS_1 0x06
+#define BVR_INITIAL_RAMP_BIT BIT(7)
+#define CC_SOFT_TERMINATE_BIT BIT(6)
+#define STEP_CHARGING_STATUS_SHIFT 3
+#define STEP_CHARGING_STATUS_MASK GENMASK(5, 3)
+#define BATTERY_CHARGER_STATUS_MASK GENMASK(2, 0)
+
+#define BATTERY_CHARGER_STATUS_2 0x07
+#define INPUT_CURRENT_LIMITED_BIT BIT(7)
+#define CHARGER_ERROR_STATUS_SFT_EXPIRE_BIT BIT(6)
+#define CHARGER_ERROR_STATUS_BAT_OV_BIT BIT(5)
+#define CHARGER_ERROR_STATUS_BAT_TERM_MISSING_BIT BIT(4)
+#define BAT_TEMP_STATUS_MASK GENMASK(3, 0)
+#define BAT_TEMP_STATUS_SOFT_LIMIT_MASK GENMASK(3, 2)
+#define BAT_TEMP_STATUS_HOT_SOFT_LIMIT_BIT BIT(3)
+#define BAT_TEMP_STATUS_COLD_SOFT_LIMIT_BIT BIT(2)
+#define BAT_TEMP_STATUS_TOO_HOT_BIT BIT(1)
+#define BAT_TEMP_STATUS_TOO_COLD_BIT BIT(0)
+
+#define BATTERY_CHARGER_STATUS_4 0x0A
+#define CHARGE_CURRENT_POST_JEITA_MASK GENMASK(7, 0)
+
+#define BATTERY_CHARGER_STATUS_7 0x0D
+#define ENABLE_TRICKLE_BIT BIT(7)
+#define ENABLE_PRE_CHARGING_BIT BIT(6)
+#define ENABLE_FAST_CHARGING_BIT BIT(5)
+#define ENABLE_FULLON_MODE_BIT BIT(4)
+#define TOO_COLD_ADC_BIT BIT(3)
+#define TOO_HOT_ADC_BIT BIT(2)
+#define HOT_SL_ADC_BIT BIT(1)
+#define COLD_SL_ADC_BIT BIT(0)
+
+#define CHARGING_ENABLE_CMD 0x42
+#define CHARGING_ENABLE_CMD_BIT BIT(0)
+
+#define CHGR_CFG2 0x51
+#define CHG_EN_SRC_BIT BIT(7)
+#define CHG_EN_POLARITY_BIT BIT(6)
+#define PRETOFAST_TRANSITION_CFG_BIT BIT(5)
+#define BAT_OV_ECC_BIT BIT(4)
+#define I_TERM_BIT BIT(3)
+#define AUTO_RECHG_BIT BIT(2)
+#define EN_ANALOG_DROP_IN_VBATT_BIT BIT(1)
+#define CHARGER_INHIBIT_BIT BIT(0)
+
+#define PRE_CHARGE_CURRENT_CFG 0x60
+#define PRE_CHARGE_CURRENT_SETTING_MASK GENMASK(5, 0)
+
+#define FAST_CHARGE_CURRENT_CFG 0x61
+#define FAST_CHARGE_CURRENT_SETTING_MASK GENMASK(7, 0)
+
+#define FLOAT_VOLTAGE_CFG 0x70
+#define FLOAT_VOLTAGE_SETTING_MASK GENMASK(7, 0)
+
+#define FG_UPDATE_CFG_2_SEL 0x7D
+#define SOC_LT_OTG_THRESH_SEL_BIT BIT(3)
+#define SOC_LT_CHG_RECHARGE_THRESH_SEL_BIT BIT(2)
+#define VBT_LT_CHG_RECHARGE_THRESH_SEL_BIT BIT(1)
+#define IBT_LT_CHG_TERM_THRESH_SEL_BIT BIT(0)
+
+#define JEITA_EN_CFG 0x90
+#define JEITA_EN_HARDLIMIT_BIT BIT(4)
+#define JEITA_EN_HOT_SL_FCV_BIT BIT(3)
+#define JEITA_EN_COLD_SL_FCV_BIT BIT(2)
+#define JEITA_EN_HOT_SL_CCC_BIT BIT(1)
+#define JEITA_EN_COLD_SL_CCC_BIT BIT(0)
+
+#define INT_RT_STS 0x310
+#define TYPE_C_CHANGE_RT_STS_BIT BIT(7)
+#define USBIN_ICL_CHANGE_RT_STS_BIT BIT(6)
+#define USBIN_SOURCE_CHANGE_RT_STS_BIT BIT(5)
+#define USBIN_PLUGIN_RT_STS_BIT BIT(4)
+#define USBIN_OV_RT_STS_BIT BIT(3)
+#define USBIN_UV_RT_STS_BIT BIT(2)
+#define USBIN_LT_3P6V_RT_STS_BIT BIT(1)
+#define USBIN_COLLAPSE_RT_STS_BIT BIT(0)
+
+#define OTG_CFG 0x153
+#define OTG_RESERVED_MASK GENMASK(7, 6)
+#define DIS_OTG_ON_TLIM_BIT BIT(5)
+#define QUICKSTART_OTG_FASTROLESWAP_BIT BIT(4)
+#define INCREASE_DFP_TIME_BIT BIT(3)
+#define ENABLE_OTG_IN_DEBUG_MODE_BIT BIT(2)
+#define OTG_EN_SRC_CFG_BIT BIT(1)
+#define CONCURRENT_MODE_CFG_BIT BIT(0)
+
+#define OTG_ENG_OTG_CFG 0x1C0
+#define ENG_BUCKBOOST_HALT1_8_MODE_BIT BIT(0)
+
+#define APSD_STATUS 0x307
+#define APSD_STATUS_7_BIT BIT(7)
+#define HVDCP_CHECK_TIMEOUT_BIT BIT(6)
+#define SLOW_PLUGIN_TIMEOUT_BIT BIT(5)
+#define ENUMERATION_DONE_BIT BIT(4)
+#define VADP_CHANGE_DONE_AFTER_AUTH_BIT BIT(3)
+#define QC_AUTH_DONE_STATUS_BIT BIT(2)
+#define QC_CHARGER_BIT BIT(1)
+#define APSD_DTC_STATUS_DONE_BIT BIT(0)
+
+#define APSD_RESULT_STATUS 0x308
+#define ICL_OVERRIDE_LATCH_BIT BIT(7)
+#define APSD_RESULT_STATUS_MASK GENMASK(6, 0)
+#define QC_3P0_BIT BIT(6)
+#define QC_2P0_BIT BIT(5)
+#define FLOAT_CHARGER_BIT BIT(4)
+#define DCP_CHARGER_BIT BIT(3)
+#define CDP_CHARGER_BIT BIT(2)
+#define OCP_CHARGER_BIT BIT(1)
+#define SDP_CHARGER_BIT BIT(0)
+
+#define TYPE_C_STATUS_1 0x30B
+#define UFP_TYPEC_MASK GENMASK(7, 5)
+#define UFP_TYPEC_RDSTD_BIT BIT(7)
+#define UFP_TYPEC_RD1P5_BIT BIT(6)
+#define UFP_TYPEC_RD3P0_BIT BIT(5)
+#define UFP_TYPEC_FMB_255K_BIT BIT(4)
+#define UFP_TYPEC_FMB_301K_BIT BIT(3)
+#define UFP_TYPEC_FMB_523K_BIT BIT(2)
+#define UFP_TYPEC_FMB_619K_BIT BIT(1)
+#define UFP_TYPEC_OPEN_OPEN_BIT BIT(0)
+
+#define TYPE_C_STATUS_2 0x30C
+#define DFP_RA_OPEN_BIT BIT(7)
+#define TIMER_STAGE_BIT BIT(6)
+#define EXIT_UFP_MODE_BIT BIT(5)
+#define EXIT_DFP_MODE_BIT BIT(4)
+#define DFP_TYPEC_MASK GENMASK(3, 0)
+#define DFP_RD_OPEN_BIT BIT(3)
+#define DFP_RD_RA_VCONN_BIT BIT(2)
+#define DFP_RD_RD_BIT BIT(1)
+#define DFP_RA_RA_BIT BIT(0)
+
+#define TYPE_C_STATUS_3 0x30D
+#define ENABLE_BANDGAP_BIT BIT(7)
+#define U_USB_GND_NOVBUS_BIT BIT(6)
+#define U_USB_FLOAT_NOVBUS_BIT BIT(5)
+#define U_USB_GND_BIT BIT(4)
+#define U_USB_FMB1_BIT BIT(3)
+#define U_USB_FLOAT1_BIT BIT(2)
+#define U_USB_FMB2_BIT BIT(1)
+#define U_USB_FLOAT2_BIT BIT(0)
+
+#define TYPE_C_STATUS_4 0x30E
+#define UFP_DFP_MODE_STATUS_BIT BIT(7)
+#define TYPEC_VBUS_STATUS_BIT BIT(6)
+#define TYPEC_VBUS_ERROR_STATUS_BIT BIT(5)
+#define TYPEC_DEBOUNCE_DONE_STATUS_BIT BIT(4)
+#define TYPEC_UFP_AUDIO_ADAPT_STATUS_BIT BIT(3)
+#define TYPEC_VCONN_OVERCURR_STATUS_BIT BIT(2)
+#define CC_ORIENTATION_BIT BIT(1)
+#define CC_ATTACHED_BIT BIT(0)
+
+#define TYPE_C_STATUS_5 0x30F
+#define TRY_SOURCE_FAILED_BIT BIT(6)
+#define TRY_SINK_FAILED_BIT BIT(5)
+#define TIMER_STAGE_2_BIT BIT(4)
+#define TYPEC_LEGACY_CABLE_STATUS_BIT BIT(3)
+#define TYPEC_NONCOMP_LEGACY_CABLE_STATUS_BIT BIT(2)
+#define TYPEC_TRYSOURCE_DETECT_STATUS_BIT BIT(1)
+#define TYPEC_TRYSINK_DETECT_STATUS_BIT BIT(0)
+
+#define CMD_APSD 0x341
+#define ICL_OVERRIDE_BIT BIT(1)
+#define APSD_RERUN_BIT BIT(0)
+
+#define TYPE_C_CFG 0x358
+#define APSD_START_ON_CC_BIT BIT(7)
+#define WAIT_FOR_APSD_BIT BIT(6)
+#define FACTORY_MODE_DETECTION_EN_BIT BIT(5)
+#define FACTORY_MODE_ICL_3A_4A_BIT BIT(4)
+#define FACTORY_MODE_DIS_CHGING_CFG_BIT BIT(3)
+#define SUSPEND_NON_COMPLIANT_CFG_BIT BIT(2)
+#define VCONN_OC_CFG_BIT BIT(1)
+#define TYPE_C_OR_U_USB_BIT BIT(0)
+
+#define TYPE_C_CFG_2 0x359
+#define TYPE_C_DFP_CURRSRC_MODE_BIT BIT(7)
+#define DFP_CC_1P4V_OR_1P6V_BIT BIT(6)
+#define VCONN_SOFTSTART_CFG_MASK GENMASK(5, 4)
+#define EN_TRY_SOURCE_MODE_BIT BIT(3)
+#define USB_FACTORY_MODE_ENABLE_BIT BIT(2)
+#define TYPE_C_UFP_MODE_BIT BIT(1)
+#define EN_80UA_180UA_CUR_SOURCE_BIT BIT(0)
+
+#define TYPE_C_CFG_3 0x35A
+#define TVBUS_DEBOUNCE_BIT BIT(7)
+#define TYPEC_LEGACY_CABLE_INT_EN_BIT BIT(6)
+#define TYPEC_NONCOMPLIANT_LEGACY_CABLE_INT_EN_B BIT(5)
+#define TYPEC_TRYSOURCE_DETECT_INT_EN_BIT BIT(4)
+#define TYPEC_TRYSINK_DETECT_INT_EN_BIT BIT(3)
+#define EN_TRYSINK_MODE_BIT BIT(2)
+#define EN_LEGACY_CABLE_DETECTION_BIT BIT(1)
+#define ALLOW_PD_DRING_UFP_TCCDB_BIT BIT(0)
+
+#define USBIN_OPTIONS_1_CFG 0x362
+#define CABLE_R_SEL_BIT BIT(7)
+#define HVDCP_AUTH_ALG_EN_CFG_BIT BIT(6)
+#define HVDCP_AUTONOMOUS_MODE_EN_CFG_BIT BIT(5)
+#define INPUT_PRIORITY_BIT BIT(4)
+#define AUTO_SRC_DETECT_BIT BIT(3)
+#define HVDCP_EN_BIT BIT(2)
+#define VADP_INCREMENT_VOLTAGE_LIMIT_BIT BIT(1)
+#define VADP_TAPER_TIMER_EN_BIT BIT(0)
+
+#define USBIN_OPTIONS_2_CFG 0x363
+#define WIPWR_RST_EUD_CFG_BIT BIT(7)
+#define SWITCHER_START_CFG_BIT BIT(6)
+#define DCD_TIMEOUT_SEL_BIT BIT(5)
+#define OCD_CURRENT_SEL_BIT BIT(4)
+#define SLOW_PLUGIN_TIMER_EN_CFG_BIT BIT(3)
+#define FLOAT_OPTIONS_MASK GENMASK(2, 0)
+#define FLOAT_DIS_CHGING_CFG_BIT BIT(2)
+#define SUSPEND_FLOAT_CFG_BIT BIT(1)
+#define FORCE_FLOAT_SDP_CFG_BIT BIT(0)
+
+#define TAPER_TIMER_SEL_CFG 0x364
+#define TYPEC_SPARE_CFG_BIT BIT(7)
+#define TYPEC_DRP_DFP_TIME_CFG_BIT BIT(5)
+#define TAPER_TIMER_SEL_MASK GENMASK(1, 0)
+
+#define USBIN_LOAD_CFG 0x365
+#define USBIN_OV_CH_LOAD_OPTION_BIT BIT(7)
+#define ICL_OVERRIDE_AFTER_APSD_BIT BIT(4)
+
+#define USBIN_ICL_OPTIONS 0x366
+#define CFG_USB3P0_SEL_BIT BIT(2)
+#define USB51_MODE_BIT BIT(1)
+#define USBIN_MODE_CHG_BIT BIT(0)
+
+#define TYPE_C_INTRPT_ENB_SOFTWARE_CTRL 0x368
+#define EXIT_SNK_BASED_ON_CC_BIT BIT(7)
+#define VCONN_EN_ORIENTATION_BIT BIT(6)
+#define TYPEC_VCONN_OVERCURR_INT_EN_BIT BIT(5)
+#define VCONN_EN_SRC_BIT BIT(4)
+#define VCONN_EN_VALUE_BIT BIT(3)
+#define TYPEC_POWER_ROLE_CMD_MASK GENMASK(2, 0)
+#define UFP_EN_CMD_BIT BIT(2)
+#define DFP_EN_CMD_BIT BIT(1)
+#define TYPEC_DISABLE_CMD_BIT BIT(0)
+
+#define USBIN_CURRENT_LIMIT_CFG 0x370
+#define USBIN_CURRENT_LIMIT_MASK GENMASK(7, 0)
+
+#define USBIN_AICL_OPTIONS_CFG 0x380
+#define SUSPEND_ON_COLLAPSE_USBIN_BIT BIT(7)
+#define USBIN_AICL_HDC_EN_BIT BIT(6)
+#define USBIN_AICL_START_AT_MAX_BIT BIT(5)
+#define USBIN_AICL_RERUN_EN_BIT BIT(4)
+#define USBIN_AICL_ADC_EN_BIT BIT(3)
+#define USBIN_AICL_EN_BIT BIT(2)
+#define USBIN_HV_COLLAPSE_RESPONSE_BIT BIT(1)
+#define USBIN_LV_COLLAPSE_RESPONSE_BIT BIT(0)
+
+#define USBIN_5V_AICL_THRESHOLD_CFG 0x381
+#define USBIN_5V_AICL_THRESHOLD_CFG_MASK GENMASK(2, 0)
+
+#define USBIN_CONT_AICL_THRESHOLD_CFG 0x384
+#define USBIN_CONT_AICL_THRESHOLD_CFG_MASK GENMASK(5, 0)
+
+#define DC_ENG_SSUPPLY_CFG2 0x4C1
+#define ENG_SSUPPLY_IVREF_OTG_SS_MASK GENMASK(2, 0)
+#define OTG_SS_SLOW 0x3
+
+#define DCIN_AICL_REF_SEL_CFG 0x481
+#define DCIN_CONT_AICL_THRESHOLD_CFG_MASK GENMASK(5, 0)
+
+#define WI_PWR_OPTIONS 0x495
+#define CHG_OK_BIT BIT(7)
+#define WIPWR_UVLO_IRQ_OPT_BIT BIT(6)
+#define BUCK_HOLDOFF_ENABLE_BIT BIT(5)
+#define CHG_OK_HW_SW_SELECT_BIT BIT(4)
+#define WIPWR_RST_ENABLE_BIT BIT(3)
+#define DCIN_WIPWR_IRQ_SELECT_BIT BIT(2)
+#define AICL_SWITCH_ENABLE_BIT BIT(1)
+#define ZIN_ICL_ENABLE_BIT BIT(0)
+
+#define ICL_STATUS 0x607
+#define INPUT_CURRENT_LIMIT_MASK GENMASK(7, 0)
+
+#define POWER_PATH_STATUS 0x60B
+#define P_PATH_INPUT_SS_DONE_BIT BIT(7)
+#define P_PATH_USBIN_SUSPEND_STS_BIT BIT(6)
+#define P_PATH_DCIN_SUSPEND_STS_BIT BIT(5)
+#define P_PATH_USE_USBIN_BIT BIT(4)
+#define P_PATH_USE_DCIN_BIT BIT(3)
+#define P_PATH_POWER_PATH_MASK GENMASK(2, 1)
+#define P_PATH_VALID_INPUT_POWER_SOURCE_STS_BIT BIT(0)
+
+#define BARK_BITE_WDOG_PET 0x643
+#define BARK_BITE_WDOG_PET_BIT BIT(0)
+
+#define WD_CFG 0x651
+#define WATCHDOG_TRIGGER_AFP_EN_BIT BIT(7)
+#define BARK_WDOG_INT_EN_BIT BIT(6)
+#define BITE_WDOG_INT_EN_BIT BIT(5)
+#define SFT_AFTER_WDOG_IRQ_MASK GENMASK(4, 3)
+#define WDOG_IRQ_SFT_BIT BIT(2)
+#define WDOG_TIMER_EN_ON_PLUGIN_BIT BIT(1)
+#define WDOG_TIMER_EN_BIT BIT(0)
+
+#define SNARL_BARK_BITE_WD_CFG 0x653
+#define BITE_WDOG_DISABLE_CHARGING_CFG_BIT BIT(7)
+#define SNARL_WDOG_TIMEOUT_MASK GENMASK(6, 4)
+#define BARK_WDOG_TIMEOUT_MASK GENMASK(3, 2)
+#define BITE_WDOG_TIMEOUT_MASK GENMASK(1, 0)
+
+#define AICL_RERUN_TIME_CFG 0x661
+#define AICL_RERUN_TIME_MASK GENMASK(1, 0)
+
+#define STAT_CFG 0x690
+#define STAT_SW_OVERRIDE_VALUE_BIT BIT(7)
+#define STAT_SW_OVERRIDE_CFG_BIT BIT(6)
+#define STAT_PARALLEL_OFF_DG_CFG_MASK GENMASK(5, 4)
+#define STAT_POLARITY_CFG_BIT BIT(3)
+#define STAT_PARALLEL_CFG_BIT BIT(2)
+#define STAT_FUNCTION_CFG_BIT BIT(1)
+#define STAT_IRQ_PULSING_EN_BIT BIT(0)
+
+#define USBIN_CURRENT_25MA 25000
+#define USBIN_CURRENT_100MA 100000
+#define USBIN_CURRENT_150MA 150000
+#define USBIN_CURRENT_500MA 500000
+#define USBIN_CURRENT_900MA 900000
+#define SDP_CURRENT_UA 500000
+#define CDP_CURRENT_UA 1500000
+#define DCP_CURRENT_UA 1500000
+#define CURRENT_MAX_UA DCP_CURRENT_UA
+// clang-format on
+
+enum charger_status {
+ TRICKLE_CHARGE = 0,
+ PRE_CHARGE,
+ FAST_CHARGE,
+ FULLON_CHARGE,
+ TAPER_CHARGE,
+ TERMINATE_CHARGE,
+ INHIBIT_CHARGE,
+ DISABLE_CHARGE,
+};
+
+struct smb2_register {
+ u16 addr;
+ u8 mask;
+ u8 val;
+};
+
+/**
+ * struct smb2_chip - smb2 chip structure
+ * @dev: Device reference for power_supply
+ * @name: The platform device name
+ * @base: Base address for smb2 registers
+ * @regmap: Register map
+ * @batt_info: Battery data from DT
+ * @status_change_work: Worker to handle plug/unplug events
+ * @usb_in_i_chan: USB_IN current measurement channel
+ * @usb_in_v_chan: USB_IN voltage measurement channel
+ * @chg_psy: Charger power supply instance
+ * @default_curr_limit: The default current limit from the APSD, used
+ * for CHARGE_CONTROL_LIMIT_MAX
+ */
+struct smb2_chip {
+ struct device *dev;
+ const char *name;
+ unsigned int base;
+ struct regmap *regmap;
+ struct power_supply_battery_info *batt_info;
+
+ struct delayed_work status_change_work;
+
+ struct iio_channel *usb_in_i_chan;
+ struct iio_channel *usb_in_v_chan;
+
+ struct power_supply *chg_psy;
+ long default_curr_limit;
+};
+
+static enum power_supply_property smb2_properties[] = {
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_USB_TYPE,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
+};
+
+static enum power_supply_usb_type smb2_usb_types[] = {
+ POWER_SUPPLY_USB_TYPE_UNKNOWN,
+ POWER_SUPPLY_USB_TYPE_SDP,
+ POWER_SUPPLY_USB_TYPE_DCP,
+ POWER_SUPPLY_USB_TYPE_CDP,
+};
+
+int smb2_get_prop_usb_online(struct smb2_chip *chip, int *val)
+{
+ unsigned int stat;
+ int rc;
+
+ rc = regmap_read(chip->regmap, chip->base + POWER_PATH_STATUS, &stat);
+ if (rc < 0) {
+ dev_err(chip->dev, "Couldn't read POWER_PATH_STATUS! ret=%d\n",
+ rc);
+ return rc;
+ }
+
+ *val = (stat & P_PATH_USE_USBIN_BIT) &&
+ (stat & P_PATH_VALID_INPUT_POWER_SOURCE_STS_BIT);
+ return 0;
+}
+
+/*
+ * Qualcomm "automatic power source detection" aka APSD
+ * tells us what type of charger we're connected to.
+ */
+static int smb2_apsd_get_charger_type(struct smb2_chip *chip, int *val)
+{
+ int rc;
+ unsigned int apsd_stat, stat;
+ int usb_online;
+
+ rc = smb2_get_prop_usb_online(chip, &usb_online);
+ if (rc < 0 || !usb_online) {
+ *val = POWER_SUPPLY_USB_TYPE_UNKNOWN;
+ return 0;
+ }
+
+ rc = regmap_read(chip->regmap, chip->base + APSD_STATUS, &apsd_stat);
+ if (rc < 0) {
+ dev_err(chip->dev, "Failed to read apsd status, rc = %d", rc);
+ return rc;
+ }
+ if (!(apsd_stat & APSD_DTC_STATUS_DONE_BIT)) {
+ dev_err(chip->dev, "Apsd not ready");
+ return -EAGAIN;
+ }
+
+ rc = regmap_read(chip->regmap, chip->base + APSD_RESULT_STATUS, &stat);
+ if (rc < 0) {
+ dev_err(chip->dev, "Failed to read apsd result, rc = %d", rc);
+ return rc;
+ }
+
+ stat &= APSD_RESULT_STATUS_MASK;
+
+ if (stat & CDP_CHARGER_BIT)
+ *val = POWER_SUPPLY_USB_TYPE_CDP;
+ else if (stat & (DCP_CHARGER_BIT | OCP_CHARGER_BIT | FLOAT_CHARGER_BIT))
+ *val = POWER_SUPPLY_USB_TYPE_DCP;
+ else /* SDP_CHARGER_BIT (or others) */
+ *val = POWER_SUPPLY_USB_TYPE_SDP;
+
+ return 0;
+}
+
+int smb2_get_prop_status(struct smb2_chip *chip, int *val)
+{
+ int usb_online_val;
+ unsigned char stat[2];
+ int rc;
+
+ rc = smb2_get_prop_usb_online(chip, &usb_online_val);
+ if (rc < 0) {
+ dev_err(chip->dev, "Couldn't get usb online property rc = %d\n",
+ rc);
+ return rc;
+ }
+
+ if (!usb_online_val) {
+ *val = POWER_SUPPLY_STATUS_DISCHARGING;
+ return rc;
+ }
+
+ rc = regmap_bulk_read(chip->regmap,
+ chip->base + BATTERY_CHARGER_STATUS_1, &stat, 2);
+ if (rc < 0) {
+ dev_err(chip->dev, "Failed to read charging status ret=%d\n",
+ rc);
+ return rc;
+ }
+
+ if (stat[1] & CHARGER_ERROR_STATUS_BAT_OV_BIT) {
+ *val = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ return 0;
+ }
+
+ stat[0] = stat[0] & BATTERY_CHARGER_STATUS_MASK;
+
+ switch (stat[0]) {
+ case TRICKLE_CHARGE:
+ case PRE_CHARGE:
+ case FAST_CHARGE:
+ case FULLON_CHARGE:
+ case TAPER_CHARGE:
+ *val = POWER_SUPPLY_STATUS_CHARGING;
+ return rc;
+ case DISABLE_CHARGE:
+ *val = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ return rc;
+ case TERMINATE_CHARGE:
+ *val = POWER_SUPPLY_STATUS_FULL;
+ return rc;
+ case INHIBIT_CHARGE:
+ default:
+ *val = POWER_SUPPLY_STATUS_UNKNOWN;
+ return rc;
+ }
+}
+
+static inline int smb2_get_current_limit(struct smb2_chip *chip,
+ unsigned int *val)
+{
+ int rc = regmap_read(chip->regmap, chip->base + ICL_STATUS, val);
+
+ if (rc >= 0)
+ *val *= 25000;
+ return rc;
+}
+
+static int smb2_set_current_limit(struct smb2_chip *chip, unsigned int val)
+{
+ unsigned char val_raw;
+
+ if (val > 4800000) {
+ dev_err(chip->dev,
+ "Can't set current limit higher than 4800000uA");
+ return -EINVAL;
+ }
+ val_raw = val / 25000;
+
+ return regmap_write(chip->regmap, chip->base + USBIN_CURRENT_LIMIT_CFG,
+ val_raw);
+}
+
+void smb2_status_change_work(struct work_struct *work)
+{
+ struct smb2_chip *chip =
+ container_of(work, struct smb2_chip, status_change_work.work);
+ unsigned int charger_type, current_ua;
+ int usb_online, count, rc;
+
+ smb2_get_prop_usb_online(chip, &usb_online);
+ if (usb_online == 0) {
+ chip->default_curr_limit = 0;
+ return;
+ }
+
+ for (count = 0; count < 3; count++) {
+ dev_dbg(chip->dev, "get charger type retry %d\n", count);
+ rc = smb2_apsd_get_charger_type(chip, &charger_type);
+ if (rc == 0)
+ break;
+ msleep(100);
+ }
+
+ if (rc < 0) {
+ rc = regmap_update_bits(chip->regmap, chip->base + CMD_APSD,
+ APSD_RERUN_BIT, APSD_RERUN_BIT);
+ schedule_delayed_work(&chip->status_change_work,
+ msecs_to_jiffies(1500));
+ dev_dbg(chip->dev, "get charger type failed, rerun apsd\n");
+ return;
+ }
+
+ switch (charger_type) {
+ case POWER_SUPPLY_USB_TYPE_CDP:
+ current_ua = CDP_CURRENT_UA;
+ break;
+ case POWER_SUPPLY_USB_TYPE_DCP:
+ current_ua = DCP_CURRENT_UA;
+ break;
+ case POWER_SUPPLY_USB_TYPE_SDP:
+ default:
+ current_ua = SDP_CURRENT_UA;
+ break;
+ }
+
+ chip->default_curr_limit = current_ua;
+
+ smb2_set_current_limit(chip, current_ua);
+ power_supply_changed(chip->chg_psy);
+}
+
+int smb2_get_iio_chan(struct smb2_chip *chip, struct iio_channel *chan,
+ int *val)
+{
+ int rc;
+ union power_supply_propval status;
+
+ rc = power_supply_get_property(chip->chg_psy, POWER_SUPPLY_PROP_STATUS,
+ &status);
+ if (rc < 0 || status.intval != POWER_SUPPLY_STATUS_CHARGING) {
+ *val = 0;
+ return 0;
+ }
+
+ if (IS_ERR(chan)) {
+ dev_err(chip->dev, "Failed to chan, err = %li", PTR_ERR(chan));
+ return PTR_ERR(chan);
+ }
+
+ return iio_read_channel_processed(chan, val);
+}
+
+int smb2_get_prop_health(struct smb2_chip *chip, int *val)
+{
+ int rc;
+ unsigned int stat;
+
+ rc = regmap_read(chip->regmap, chip->base + BATTERY_CHARGER_STATUS_2,
+ &stat);
+ if (rc < 0) {
+ dev_err(chip->dev, "Couldn't read charger status rc=%d\n", rc);
+ return rc;
+ }
+
+ switch (stat) {
+ case CHARGER_ERROR_STATUS_BAT_OV_BIT:
+ *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ return 0;
+ case BAT_TEMP_STATUS_TOO_COLD_BIT:
+ *val = POWER_SUPPLY_HEALTH_COLD;
+ return 0;
+ case BAT_TEMP_STATUS_TOO_HOT_BIT:
+ *val = POWER_SUPPLY_HEALTH_OVERHEAT;
+ return 0;
+ case BAT_TEMP_STATUS_COLD_SOFT_LIMIT_BIT:
+ *val = POWER_SUPPLY_HEALTH_COOL;
+ return 0;
+ case BAT_TEMP_STATUS_HOT_SOFT_LIMIT_BIT:
+ *val = POWER_SUPPLY_HEALTH_WARM;
+ return 0;
+ default:
+ *val = POWER_SUPPLY_HEALTH_GOOD;
+ return 0;
+ }
+}
+
+static int smb2_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct smb2_chip *chip = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = "Qualcomm";
+ return 0;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = chip->name;
+ return 0;
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+ return smb2_get_current_limit(chip, &val->intval);
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
+ val->intval = chip->default_curr_limit;
+ return 0;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ return smb2_get_iio_chan(chip, chip->usb_in_i_chan,
+ &val->intval);
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ return smb2_get_iio_chan(chip, chip->usb_in_v_chan,
+ &val->intval);
+ case POWER_SUPPLY_PROP_ONLINE:
+ return smb2_get_prop_usb_online(chip, &val->intval);
+ case POWER_SUPPLY_PROP_STATUS:
+ return smb2_get_prop_status(chip, &val->intval);
+ case POWER_SUPPLY_PROP_HEALTH:
+ return smb2_get_prop_health(chip, &val->intval);
+ case POWER_SUPPLY_PROP_USB_TYPE:
+ return smb2_apsd_get_charger_type(chip, &val->intval);
+ default:
+ dev_err(chip->dev, "invalid property: %d\n", psp);
+ return -EINVAL;
+ }
+}
+
+static int smb2_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct smb2_chip *chip = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+ return smb2_set_current_limit(chip, val->intval);
+ default:
+ dev_err(chip->dev, "No setter for property: %d\n", psp);
+ return -EINVAL;
+ }
+}
+
+static int smb2_property_is_writable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+irqreturn_t smb2_handle_batt_overvoltage(int irq, void *data)
+{
+ struct smb2_chip *chip = data;
+ unsigned int status;
+
+ regmap_read(chip->regmap, chip->base + BATTERY_CHARGER_STATUS_2,
+ &status);
+
+ if (status & CHARGER_ERROR_STATUS_BAT_OV_BIT) {
+ /* The hardware stops charging automatically */
+ dev_err(chip->dev,
+ "battery overvoltage detected, charging stopped\n");
+ power_supply_changed(chip->chg_psy);
+ }
+
+ return IRQ_HANDLED;
+}
+
+irqreturn_t smb2_handle_usb_plugin(int irq, void *data)
+{
+ struct smb2_chip *chip = data;
+
+ power_supply_changed(chip->chg_psy);
+
+ schedule_delayed_work(&chip->status_change_work,
+ msecs_to_jiffies(1000));
+
+ return IRQ_HANDLED;
+}
+
+irqreturn_t smb2_handle_usb_icl_change(int irq, void *data)
+{
+ struct smb2_chip *chip = data;
+
+ power_supply_changed(chip->chg_psy);
+
+ return IRQ_HANDLED;
+}
+
+irqreturn_t smb2_handle_wdog_bark(int irq, void *data)
+{
+ struct smb2_chip *chip = data;
+ int rc;
+
+ power_supply_changed(chip->chg_psy);
+
+ rc = regmap_write(chip->regmap, BARK_BITE_WDOG_PET,
+ BARK_BITE_WDOG_PET_BIT);
+ if (rc < 0)
+ dev_err(chip->dev, "Couldn't pet the dog rc=%d\n", rc);
+
+ return IRQ_HANDLED;
+}
+
+static const struct power_supply_desc smb2_psy_desc = {
+ .name = "pmi8998_charger",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .usb_types = smb2_usb_types,
+ .num_usb_types = ARRAY_SIZE(smb2_usb_types),
+ .properties = smb2_properties,
+ .num_properties = ARRAY_SIZE(smb2_properties),
+ .get_property = smb2_get_property,
+ .set_property = smb2_set_property,
+ .property_is_writeable = smb2_property_is_writable,
+};
+
+/* Init sequence derived from vendor downstream driver */
+static const struct smb2_register smb2_init_seq[] = {
+ { .addr = AICL_RERUN_TIME_CFG, .mask = AICL_RERUN_TIME_MASK, .val = 0 },
+ /*
+ * By default configure us as an upstream facing port
+ * FIXME: for OTG we should set UFP_EN_CMD_BIT and DFP_EN_CMD_BIT both to 0
+ */
+ { .addr = TYPE_C_INTRPT_ENB_SOFTWARE_CTRL,
+ .mask = TYPEC_POWER_ROLE_CMD_MASK | VCONN_EN_SRC_BIT |
+ VCONN_EN_VALUE_BIT,
+ .val = VCONN_EN_SRC_BIT | UFP_EN_CMD_BIT },
+ /*
+ * disable Type-C factory mode and stay in Attached.SRC state when VCONN
+ * over-current happens
+ */
+ { .addr = TYPE_C_CFG,
+ .mask = FACTORY_MODE_DETECTION_EN_BIT | VCONN_OC_CFG_BIT,
+ .val = 0 },
+ /* Configure VBUS for software control */
+ { .addr = OTG_CFG, .mask = OTG_EN_SRC_CFG_BIT, .val = 0 },
+ { .addr = FG_UPDATE_CFG_2_SEL,
+ .mask = SOC_LT_CHG_RECHARGE_THRESH_SEL_BIT |
+ VBT_LT_CHG_RECHARGE_THRESH_SEL_BIT,
+ .val = VBT_LT_CHG_RECHARGE_THRESH_SEL_BIT },
+ /* Enable charging */
+ { .addr = USBIN_OPTIONS_1_CFG, .mask = HVDCP_EN_BIT, .val = 0 },
+ { .addr = CHARGING_ENABLE_CMD,
+ .mask = CHARGING_ENABLE_CMD_BIT,
+ .val = CHARGING_ENABLE_CMD_BIT },
+ /* Allow overriding the current limit */
+ // { .addr = USBIN_LOAD_CFG,
+ // .mask = ICL_OVERRIDE_AFTER_APSD_BIT,
+ // .val = ICL_OVERRIDE_AFTER_APSD_BIT },
+ { .addr = CHGR_CFG2,
+ .mask = CHG_EN_SRC_BIT | CHG_EN_POLARITY_BIT |
+ PRETOFAST_TRANSITION_CFG_BIT | BAT_OV_ECC_BIT | I_TERM_BIT |
+ AUTO_RECHG_BIT | EN_ANALOG_DROP_IN_VBATT_BIT |
+ CHARGER_INHIBIT_BIT,
+ .val = 0 },
+ /*
+ * No clue what this does
+ */
+ { .addr = STAT_CFG,
+ .mask = STAT_SW_OVERRIDE_CFG_BIT,
+ .val = STAT_SW_OVERRIDE_CFG_BIT },
+ /*
+ * Set the default SDP charger type to a 500ma USB 2.0 port
+ */
+ { .addr = USBIN_ICL_OPTIONS,
+ .mask = USB51_MODE_BIT | USBIN_MODE_CHG_BIT,
+ .val = USB51_MODE_BIT },
+ /*
+ * Disable watchdog
+ */
+ { .addr = SNARL_BARK_BITE_WD_CFG, .mask = 0xff, .val = 0 },
+ { .addr = WD_CFG,
+ .mask = WATCHDOG_TRIGGER_AFP_EN_BIT | WDOG_TIMER_EN_ON_PLUGIN_BIT |
+ BARK_WDOG_INT_EN_BIT,
+ .val = 0 },
+ /* OnePlus init stuff from "op_set_collapse_fet" */
+ { .addr = USBIN_5V_AICL_THRESHOLD_CFG,
+ .mask = USBIN_5V_AICL_THRESHOLD_CFG_MASK,
+ .val = 0x3 },
+ { .addr = USBIN_CONT_AICL_THRESHOLD_CFG,
+ .mask = USBIN_CONT_AICL_THRESHOLD_CFG_MASK,
+ .val = 0x3 },
+ /* Yay undocumented register values! */
+ { .addr = USBIN_LOAD_CFG, .mask = BIT(0) | BIT(1), .val = 0x3 },
+ /* Enable Automatic Input Current Limit, this will slowly ramp up the current
+ * When connected to a wall charger, and automatically stop when it detects
+ * the charger current limit (voltage drop?) or it reaches the programmed limit.
+ */
+ { .addr = USBIN_AICL_OPTIONS_CFG,
+ .mask = USBIN_AICL_START_AT_MAX_BIT | USBIN_AICL_ADC_EN_BIT |
+ USBIN_AICL_EN_BIT | SUSPEND_ON_COLLAPSE_USBIN_BIT |
+ USBIN_HV_COLLAPSE_RESPONSE_BIT |
+ USBIN_LV_COLLAPSE_RESPONSE_BIT,
+ .val = USBIN_HV_COLLAPSE_RESPONSE_BIT |
+ USBIN_LV_COLLAPSE_RESPONSE_BIT | USBIN_AICL_EN_BIT },
+ /*
+ * Set pre charge current to default, the OnePlus 6 bootloader
+ * sets this very conservatively.
+ * NOTE: seems to be reset to zero again anyway after boot
+ */
+ { .addr = PRE_CHARGE_CURRENT_CFG,
+ .mask = PRE_CHARGE_CURRENT_SETTING_MASK,
+ .val = 500000 / 25000 },
+ /*
+ * Set "fast charge current" to the default 2A, the OnePlus 6 also
+ * sets this very conservatively.
+ * NOTE: seems to be reset to zero again anyway after boot
+ */
+ { .addr = FAST_CHARGE_CURRENT_CFG,
+ .mask = FAST_CHARGE_CURRENT_SETTING_MASK,
+ .addr = 1950000 / 25000 },
+};
+
+static int smb2_init_hw(struct smb2_chip *chip)
+{
+ int rc, i;
+
+ for (i = 0; i < ARRAY_SIZE(smb2_init_seq); i++) {
+ dev_dbg(chip->dev, "%d: Writing 0x%02x to 0x%02x\n", i,
+ smb2_init_seq[i].val, smb2_init_seq[i].addr);
+ rc = regmap_update_bits(chip->regmap,
+ chip->base + smb2_init_seq[i].addr,
+ smb2_init_seq[i].mask,
+ smb2_init_seq[i].val);
+ if (rc < 0)
+ return dev_err_probe(
+ chip->dev, rc,
+ "%s: Failed to write 0x%02x to 0x%02x\n",
+ __func__, smb2_init_seq[i].val,
+ smb2_init_seq[i].addr);
+ }
+
+ return 0;
+}
+
+struct smb2_irqs {
+ const char *name;
+ irqreturn_t (*handler)(int irq, void *data);
+};
+
+static const struct smb2_irqs irqs[] = {
+ { .name = "bat-ov", .handler = smb2_handle_batt_overvoltage },
+ { .name = "usb-plugin", .handler = smb2_handle_usb_plugin },
+ { .name = "usbin-icl-change", .handler = smb2_handle_usb_icl_change },
+ { .name = "wdog-bark", .handler = smb2_handle_wdog_bark },
+};
+
+static int smb2_probe(struct platform_device *pdev)
+{
+ struct power_supply_config supply_config = {};
+ struct smb2_chip *chip;
+ int rc, i, irq;
+
+ chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->dev = &pdev->dev;
+ chip->name = pdev->name;
+
+ chip->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!chip->regmap) {
+ return dev_err_probe(chip->dev, -ENODEV,
+ "failed to locate the regmap\n");
+ }
+
+ rc = device_property_read_u32(chip->dev, "reg", &chip->base);
+ if (rc < 0) {
+ return dev_err_probe(chip->dev, rc,
+ "Couldn't read base address\n");
+ }
+
+ chip->usb_in_v_chan = devm_iio_channel_get(chip->dev, "usbin_v");
+ if (IS_ERR(chip->usb_in_v_chan))
+ return dev_err_probe(
+ chip->dev, PTR_ERR(chip->usb_in_v_chan),
+ "Couldn't get usbin_v IIO channel from RRADC\n");
+
+ chip->usb_in_i_chan = devm_iio_channel_get(chip->dev, "usbin_i");
+ if (IS_ERR(chip->usb_in_i_chan)) {
+ return dev_err_probe(
+ chip->dev, PTR_ERR(chip->usb_in_i_chan),
+ "Couldn't get usbin_i IIO channel from RRADC\n");
+ }
+
+ rc = smb2_init_hw(chip);
+ if (rc < 0)
+ return rc;
+
+ supply_config.drv_data = chip;
+ supply_config.of_node = pdev->dev.of_node;
+
+ chip->chg_psy = devm_power_supply_register(chip->dev, &smb2_psy_desc,
+ &supply_config);
+ if (IS_ERR(chip->chg_psy))
+ return dev_err_probe(chip->dev, PTR_ERR(chip->chg_psy),
+ "failed to register power supply\n");
+
+ rc = power_supply_get_battery_info(chip->chg_psy, &chip->batt_info);
+ if (rc)
+ return dev_err_probe(chip->dev, rc,
+ "Failed to get battery info\n");
+
+ rc = devm_delayed_work_autocancel(chip->dev, &chip->status_change_work,
+ smb2_status_change_work);
+ if (rc)
+ return dev_err_probe(
+ chip->dev, rc,
+ "Failed to initialise status change work\n");
+
+ rc = (chip->batt_info->voltage_max_design_uv - 3487500) / 7500 + 1;
+ rc = regmap_update_bits(chip->regmap, chip->base + FLOAT_VOLTAGE_CFG,
+ FLOAT_VOLTAGE_SETTING_MASK, rc);
+ if (rc < 0)
+ return dev_err_probe(chip->dev, rc, "Couldn't set vbat max\n");
+
+ for (i = 0; i < ARRAY_SIZE(irqs); i++) {
+ irq = of_irq_get_byname(pdev->dev.of_node, irqs[i].name);
+ if (irq < 0)
+ return dev_err_probe(chip->dev, irq,
+ "Couldn't get irq %s byname\n",
+ irqs[i].name);
+ rc = devm_request_threaded_irq(chip->dev, irq, NULL,
+ irqs[i].handler, IRQF_ONESHOT,
+ irqs[i].name, chip);
+ if (rc < 0)
+ return dev_err_probe(chip->dev, irq,
+ "Couldn't request irq %s\n",
+ irqs[i].name);
+ }
+
+ platform_set_drvdata(pdev, chip);
+
+ /* Initialise charger state */
+ schedule_delayed_work(&chip->status_change_work, 0);
+
+ return 0;
+}
+
+static const struct of_device_id smb2_match_id_table[] = {
+ { .compatible = "qcom,pmi8998-charger" },
+ { .compatible = "qcom,pm660-charger" },
+ { /* sentinal */ }
+};
+MODULE_DEVICE_TABLE(of, smb2_match_id_table);
+
+static struct platform_driver qcom_spmi_smb2 = {
+ .probe = smb2_probe,
+ .driver = {
+ .name = "qcom-pmi8998-charger",
+ .of_match_table = smb2_match_id_table,
+ },
+};
+
+module_platform_driver(qcom_spmi_smb2);
+
+MODULE_AUTHOR("Caleb Connolly <caleb.connolly@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Qualcomm SMB2 Charger Driver");
+MODULE_LICENSE("GPL");
--
2.36.1
