Re: [PATCH v3 2/2] usb: renesas_usbhs: Add device tree support for R-Car H2 and M2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hello.

(2014/09/30 1:35), Sergei Shtylyov wrote:
> Hello.
> 
> On 09/03/2014 09:25 AM, Yoshihiro Shimoda wrote:
> 
>> This driver supports other SoCs, but they need boards/Soc depend code.
>> So, this patch adds device tree support for R-Car H2 and M2 initially.
> 
>> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
>> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
>> ---
>>   drivers/usb/renesas_usbhs/common.c |   44 ++++++++++++++++++++++++++++++++++++
>>   1 file changed, 44 insertions(+)
> 
>> diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
>> index 1b9bf8d..b3b6813 100644
>> --- a/drivers/usb/renesas_usbhs/common.c
>> +++ b/drivers/usb/renesas_usbhs/common.c
>> @@ -18,6 +18,8 @@
>>   #include <linux/gpio.h>
>>   #include <linux/io.h>
>>   #include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_gpio.h>
>>   #include <linux/pm_runtime.h>
>>   #include <linux/slab.h>
>>   #include <linux/sysfs.h>
>> @@ -438,6 +440,43 @@ static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev)
> [...]
>> +static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev)
>> +{
>> +	struct renesas_usbhs_platform_info *info;
>> +	struct renesas_usbhs_driver_param *dparam;
>> +	const struct of_device_id *of_id = of_match_device(usbhs_of_match, dev);
>> +	u32 tmp;
>> +	int gpio;
>> +
>> +	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
>> +	if (!info)
>> +		return NULL;
>> +
>> +	dparam = &info->driver_param;
>> +	dparam->type = of_id ? (u32)of_id->data : 0;
>> +	if (!of_property_read_u32(dev->of_node, "renesas,buswait", &tmp))
>> +		dparam->buswait_bwait = tmp;
>> +	gpio = of_get_named_gpio_flags(dev->of_node, "renesas,enable-gpio", 0,
>> +				       NULL);
>> +	if (gpio > 0)
>> +		dparam->enable_gpio = gpio;
>> +
>> +	return info;
> 
>     I don't see where you parse the optional "phy" property. It should exist 
> for the Lager and Koelsch boards you target.

Since I wrote 'phy-names: must be "usb"' in the document,
I intend to use a fixed property for "phy" driver like the following:

	phy = phy_get(&pdev->dev, "usb");

Is this a bad code?

About using the phy driver in renesas_usbhs driver, I intend to modify
the drivers/usb/renesas_usbhs/rcar.c.

Best regards,
Yoshihiro Shimoda

> WBR, Sergei
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux