Enable usb phy by default. When the usb phy were pushed, half of them
were flagged as disabled by mistake. Fix this to correctly init dwc3
node on any ipq8064 based SoC.
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
Tested-by: Jonathan McDowell <noodles@xxxxxxxx>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index b2faa4a067e9..9c32c637ea46 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1177,8 +1177,6 @@ hs_phy_0: phy@100f8800 {
clocks = <&gcc USB30_0_UTMI_CLK>;
clock-names = "ref";
#phy-cells = <0>;
-
- status = "disabled";
};
ss_phy_0: phy@100f8830 {
@@ -1187,8 +1185,6 @@ ss_phy_0: phy@100f8830 {
clocks = <&gcc USB30_0_MASTER_CLK>;
clock-names = "ref";
#phy-cells = <0>;
-
- status = "disabled";
};
usb3_0: usb3@100f8800 {
--
2.36.1
