Rename the GPIO related sfp properties to include the preffered -gpios
suffix. Also, with this change the dtb_check will no longer complain
when trying to verify the DTS against the sff,sfp.yaml binding.
Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx>
---
Changes in v2:
- new patch
.../dts/marvell/armada-3720-turris-mox.dts | 10 ++++----
.../boot/dts/marvell/armada-3720-uDPU.dts | 16 ++++++-------
.../boot/dts/marvell/armada-7040-mochabin.dts | 16 ++++++-------
.../marvell/armada-8040-clearfog-gt-8k.dts | 4 ++--
.../boot/dts/marvell/armada-8040-mcbin.dtsi | 24 +++++++++----------
.../dts/marvell/armada-8040-puzzle-m801.dts | 16 ++++++-------
arch/arm64/boot/dts/marvell/cn9130-crb.dtsi | 6 ++---
arch/arm64/boot/dts/marvell/cn9130-db.dtsi | 8 +++----
arch/arm64/boot/dts/marvell/cn9131-db.dtsi | 8 +++----
arch/arm64/boot/dts/marvell/cn9132-db.dtsi | 8 +++----
10 files changed, 58 insertions(+), 58 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index caf9c8529fca..cbf75ddd6857 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -100,11 +100,11 @@
sfp: sfp {
compatible = "sff,sfp";
i2c-bus = <&i2c0>;
- los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
- rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
+ rate-select0-gpios = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
/* enabled by U-Boot if SFP module is present */
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
index a35317d24d6c..b20c8e7d923b 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -65,20 +65,20 @@
sfp_eth0: sfp-eth0 {
compatible = "sff,sfp";
i2c-bus = <&i2c0>;
- los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
};
sfp_eth1: sfp-eth1 {
compatible = "sff,sfp";
i2c-bus = <&i2c1>;
- los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&gpiosb 8 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
index 39a8e5e99d79..5f6ed735e31a 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
@@ -34,20 +34,20 @@
sfp_eth0: sfp-eth0 {
compatible = "sff,sfp";
i2c-bus = <&cp0_i2c1>;
- los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
};
/* SFP 1G */
sfp_eth2: sfp-eth2 {
compatible = "sff,sfp";
i2c-bus = <&cp0_i2c0>;
- los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 871f84b4a6ed..079c2745070a 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -64,8 +64,8 @@
sfp_cp0_eth0: sfp-cp0-eth0 {
compatible = "sff,sfp";
i2c-bus = <&cp0_i2c1>;
- mod-def0-gpio = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>;
maximum-power-milliwatt = <2000>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index 779cf167c33e..33c179838e24 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -65,10 +65,10 @@
/* CON15,16 - CPM lane 4 */
compatible = "sff,sfp";
i2c-bus = <&sfpp0_i2c>;
- los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp1_sfpp0_pins>;
maximum-power-milliwatt = <2000>;
@@ -78,10 +78,10 @@
/* CON17,18 - CPS lane 4 */
compatible = "sff,sfp";
i2c-bus = <&sfpp1_i2c>;
- los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
maximum-power-milliwatt = <2000>;
@@ -91,10 +91,10 @@
/* CON13,14 - CPS lane 5 */
compatible = "sff,sfp";
i2c-bus = <&sfp_1g_i2c>;
- los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
maximum-power-milliwatt = <2000>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
index 74bed79e4f5e..72e9b0f671a9 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
@@ -67,20 +67,20 @@
sfp_cp0_eth0: sfp-cp0-eth0 {
compatible = "sff,sfp";
i2c-bus = <&sfpplus0_i2c>;
- los-gpio = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
};
sfp_cp1_eth0: sfp-cp1-eth0 {
compatible = "sff,sfp";
i2c-bus = <&sfpplus1_i2c>;
- los-gpio = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index 1acd746284dc..8e4ec243fb8f 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -78,9 +78,9 @@
compatible = "sff,sfp";
i2c-bus = <&cp0_i2c1>;
mod-def0-gpios = <&expander0 3 GPIO_ACTIVE_LOW>;
- los-gpio = <&expander0 15 GPIO_ACTIVE_HIGH>;
- tx-disable-gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&expander0 15 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
index 7e20987253a3..85d7ce13e70a 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
@@ -90,10 +90,10 @@
cp0_sfp_eth0: sfp-eth@0 {
compatible = "sff,sfp";
i2c-bus = <&cp0_sfpp0_i2c>;
- los-gpio = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>;
/*
* SFP cages are unconnected on early PCBs because of an the I2C
* lanes not being connected. Prevent the port for being
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
index b7fc241a228c..ff8422fae31b 100644
--- a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
@@ -37,10 +37,10 @@
cp1_sfp_eth1: sfp-eth1 {
compatible = "sff,sfp";
i2c-bus = <&cp1_i2c0>;
- los-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp1_sfp_pins>;
/*
diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
index 3f1795fb4fe7..512a4fa2861e 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
@@ -57,10 +57,10 @@
cp2_sfp_eth0: sfp-eth0 {
compatible = "sff,sfp";
i2c-bus = <&cp2_sfpp0_i2c>;
- los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
/*
* SFP cages are unconnected on early PCBs because of an the I2C
* lanes not being connected. Prevent the port for being
--
2.17.1
