init_reset_optional() is somewhat oddly placed amidst the macb_config
struct definitions. Move it to a more reasonable location alongside
the fu540 init functions.
Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
drivers/net/ethernet/cadence/macb_main.c | 68 ++++++++++++------------
1 file changed, 34 insertions(+), 34 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 4423d99c72a7..36a659f2a289 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -4600,6 +4600,40 @@ static int fu540_c000_init(struct platform_device *pdev)
return macb_init(pdev);
}
+static int init_reset_optional(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct macb *bp = netdev_priv(dev);
+ int ret;
+
+ if (bp->phy_interface == PHY_INTERFACE_MODE_SGMII) {
+ /* Ensure PHY device used in SGMII mode is ready */
+ bp->sgmii_phy = devm_phy_optional_get(&pdev->dev, NULL);
+
+ if (IS_ERR(bp->sgmii_phy))
+ return dev_err_probe(&pdev->dev, PTR_ERR(bp->sgmii_phy),
+ "failed to get SGMII PHY\n");
+
+ ret = phy_init(bp->sgmii_phy);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "failed to init SGMII PHY\n");
+ }
+
+ /* Fully reset controller at hardware level if mapped in device tree */
+ ret = device_reset_optional(&pdev->dev);
+ if (ret) {
+ phy_exit(bp->sgmii_phy);
+ return dev_err_probe(&pdev->dev, ret, "failed to reset controller");
+ }
+
+ ret = macb_init(pdev);
+ if (ret)
+ phy_exit(bp->sgmii_phy);
+
+ return ret;
+}
+
static const struct macb_usrio_config sama7g5_usrio = {
.mii = 0,
.rmii = 1,
@@ -4689,40 +4723,6 @@ static const struct macb_config np4_config = {
.usrio = &macb_default_usrio,
};
-static int init_reset_optional(struct platform_device *pdev)
-{
- struct net_device *dev = platform_get_drvdata(pdev);
- struct macb *bp = netdev_priv(dev);
- int ret;
-
- if (bp->phy_interface == PHY_INTERFACE_MODE_SGMII) {
- /* Ensure PHY device used in SGMII mode is ready */
- bp->sgmii_phy = devm_phy_optional_get(&pdev->dev, NULL);
-
- if (IS_ERR(bp->sgmii_phy))
- return dev_err_probe(&pdev->dev, PTR_ERR(bp->sgmii_phy),
- "failed to get SGMII PHY\n");
-
- ret = phy_init(bp->sgmii_phy);
- if (ret)
- return dev_err_probe(&pdev->dev, ret,
- "failed to init SGMII PHY\n");
- }
-
- /* Fully reset controller at hardware level if mapped in device tree */
- ret = device_reset_optional(&pdev->dev);
- if (ret) {
- phy_exit(bp->sgmii_phy);
- return dev_err_probe(&pdev->dev, ret, "failed to reset controller");
- }
-
- ret = macb_init(pdev);
- if (ret)
- phy_exit(bp->sgmii_phy);
-
- return ret;
-}
-
static const struct macb_config zynqmp_config = {
.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE |
MACB_CAPS_JUMBO |
--
2.36.1
