This platform carries a HID compatible I2C touchscreen on the i2c4 bus,
but it may be at a different address, depending on the board model.
Add the node for a touchscreen at 0x10, but enable it only in the
final board dts.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
.../dts/mediatek/mt8195-cherry-tomato-r1.dts | 4 +++
.../dts/mediatek/mt8195-cherry-tomato-r2.dts | 4 +++
.../dts/mediatek/mt8195-cherry-tomato-r3.dts | 4 +++
.../boot/dts/mediatek/mt8195-cherry.dtsi | 28 +++++++++++++++++++
4 files changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
index 7ca344ccc225..3348ba69ff6c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
@@ -9,3 +9,7 @@ / {
model = "Acer Tomato (rev1) board";
compatible = "google,tomato-rev1", "google,tomato", "mediatek,mt8195";
};
+
+&ts_10 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
index eb80f23273aa..4669e9d917f8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
@@ -29,3 +29,7 @@ pins-low-power-pcie0-disable {
bias-pull-down;
};
};
+
+&ts_10 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
index f9cdda07da88..5021edd02f7c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
@@ -30,3 +30,7 @@ pins-low-power-pcie0-disable {
bias-pull-down;
};
};
+
+&ts_10 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index 2c8b760d0da1..fcc600674339 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -145,6 +145,18 @@ &i2c4 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins>;
+
+ ts_10: touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ hid-descr-addr = <0x0001>;
+ interrupts-extended = <&pio 92 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+ post-power-on-delay-ms = <10>;
+ vdd-supply = <&pp3300_s3>;
+ status = "disabled";
+ };
};
&i2c5 {
@@ -609,6 +621,22 @@ subpmic_pin_irq: pins-subpmic-int-n {
bias-pull-up;
};
};
+
+ touchscreen_pins: touchscreen-default-pins {
+ pins-int-n {
+ pinmux = <PINMUX_GPIO92__FUNC_GPIO92>;
+ input-enable;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ pins-rst {
+ pinmux = <PINMUX_GPIO56__FUNC_GPIO56>;
+ output-high;
+ };
+ pins-report-sw {
+ pinmux = <PINMUX_GPIO57__FUNC_GPIO57>;
+ output-low;
+ };
+ };
};
&pmic {
--
2.35.1
