On 15.06.2022 11:06, Claudiu Beznea wrote:
> Fix the following compilation warning:
> Warning (simple_bus_reg): /ahb/apb/resistive-touch: missing or empty reg/ranges property
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
Applied to at91-dt, thanks!
> ---
> arch/arm/boot/dts/sama5d2.dtsi | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
> index 89c71d419f82..b147db8b973f 100644
> --- a/arch/arm/boot/dts/sama5d2.dtsi
> +++ b/arch/arm/boot/dts/sama5d2.dtsi
> @@ -99,6 +99,16 @@ ns_sram: sram@200000 {
> ranges = <0 0x00200000 0x20000>;
> };
>
> + resistive_touch: resistive-touch {
> + compatible = "resistive-adc-touch";
> + io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
> + <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
> + <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
> + io-channel-names = "x", "y", "pressure";
> + touchscreen-min-pressure = <50000>;
> + status = "disabled";
> + };
> +
> ahb {
> compatible = "simple-bus";
> #address-cells = <1>;
> @@ -1050,16 +1060,6 @@ adc: adc@fc030000 {
> status = "disabled";
> };
>
> - resistive_touch: resistive-touch {
> - compatible = "resistive-adc-touch";
> - io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
> - <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
> - <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
> - io-channel-names = "x", "y", "pressure";
> - touchscreen-min-pressure = <50000>;
> - status = "disabled";
> - };
> -
> pioA: pinctrl@fc038000 {
> compatible = "atmel,sama5d2-pinctrl";
> reg = <0xfc038000 0x600>;
