On Thu, Jun 30, 2022 at 05:33:16PM +0200, AngeloGioacchino Del Regno wrote:
> This platform carries a HID compatible I2C touchscreen on the i2c4 bus,
> but it may either be at 0x10, or at 0x15, depending on the board model:
> declare both as disabled in the common Cherry device-tree and enable
> the required touchscreen node on a per-board basis.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
> ---
> .../dts/mediatek/mt8195-cherry-tomato-r1.dts | 4 ++
> .../dts/mediatek/mt8195-cherry-tomato-r2.dts | 4 ++
> .../dts/mediatek/mt8195-cherry-tomato-r3.dts | 4 ++
> .../boot/dts/mediatek/mt8195-cherry.dtsi | 41 +++++++++++++++++++
> 4 files changed, 53 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
> index 17e9e4d6f6ab..2837fb24c84c 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
> @@ -9,3 +9,7 @@ / {
> model = "MediaTek Tomato (rev1) board";
> compatible = "google,tomato-rev1", "google,tomato", "mediatek,mt8195";
> };
> +
> +&ts_10 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
> index ee5fd07ad573..4e1d1a1887c7 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
> @@ -29,3 +29,7 @@ pins-low-power-pcie0-disable {
> bias-pull-down;
> };
> };
> +
> +&ts_10 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
> index 792f6c83e88b..4a45884203ea 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
> @@ -30,3 +30,7 @@ pins-low-power-pcie0-disable {
> bias-pull-down;
> };
> };
> +
> +&ts_10 {
> + status = "okay";
> +};
But no board currently uses the one on 0x15?
Thanks,
Nícolas
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
> index 2687c6d40ac1..7a32c7006a5a 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
> @@ -143,6 +143,31 @@ &i2c4 {
> clock-frequency = <400000>;
> pinctrl-names = "default";
> pinctrl-0 = <&i2c4_pin>;
> +
> + /* Depending on the machine, the TS may be at 0x10 or at 0x15 */
> + ts_10: touchscreen@10 {
> + compatible = "hid-over-i2c";
> + reg = <0x10>;
> + hid-descr-addr = <0x0001>;
> + interrupts-extended = <&pio 92 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&touchscreen_pins>;
> + post-power-on-delay-ms = <10>;
> + vdd-supply = <&pp3300_s3>;
> + status = "disabled";
> + };
> +
> + ts_15: touchscreen@15 {
> + compatible = "hid-over-i2c";
> + reg = <0x15>;
> + hid-descr-addr = <0x0001>;
> + interrupts-extended = <&pio 92 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&touchscreen_pins>;
> + post-power-on-delay-ms = <10>;
> + vdd-supply = <&pp3300_s3>;
> + status = "disabled";
> + };
> };
>
> &i2c5 {
> @@ -609,6 +634,22 @@ subpmic_pin_irq: pins-subpmic-int-n {
> bias-pull-up;
> };
> };
> +
> + touchscreen_pins: touchscreen-default-pins {
> + pins-int-n {
> + pinmux = <PINMUX_GPIO92__FUNC_GPIO92>;
> + input-enable;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> + pins-rst {
> + pinmux = <PINMUX_GPIO56__FUNC_GPIO56>;
> + output-high;
> + };
> + pins-report-sw {
> + pinmux = <PINMUX_GPIO57__FUNC_GPIO57>;
> + output-low;
> + };
> + };
> };
>
> &pmic {
> --
> 2.35.1
>
