On Sun, Jun 19, 2022 at 11:03:55PM +0300, Serge Semin wrote: > On Wed, Jun 15, 2022 at 10:37:12AM -0600, Rob Herring wrote: > > On Fri, Jun 10, 2022 at 11:57:00AM +0300, Serge Semin wrote: > > > Baikal-T1 SoC is equipped with DWC PCIe v4.60a Root Port controller, which > > > link can be trained to work on up to Gen.3 speed over up to x4 lanes. The > > > controller is supposed to be fed up with four clock sources: DBI > > > peripheral clock, AXI application Tx/Rx clocks and external PHY/core > > > reference clock generating the 100MHz signal. In addition to that the > > > platform provide a way to reset each part of the controller: > > > sticky/non-sticky bits, host controller core, PIPE interface, PCS/PHY and > > > Hot/Power reset signal. The Root Port controller is equipped with multiple > > > IRQ lines like MSI, system AER, PME, HP, Bandwidth change, Link > > > equalization request and eDMA ones. The registers space is accessed over > > > the DBI interface. There can be no more than four inbound or outbound iATU > > > windows configured. > > > > > > Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx> > > > > > > --- > > > > > > Changelog v2: > > > - Rename 'syscon' property to 'baikal,bt1-syscon'. > > > - Fix the 'compatible' property definition to being more specific about > > > what strings are supposed to be used. Due to that we had to add the > > > select property to evaluate the schema against the Baikal-T1 PCIe DT > > > nodes only. > > > --- > > > .../bindings/pci/baikal,bt1-pcie.yaml | 154 ++++++++++++++++++ > > > 1 file changed, 154 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml b/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml > > > new file mode 100644 > > > index 000000000000..23bd1d0aa5c5 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml > > > @@ -0,0 +1,154 @@ > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/pci/baikal,bt1-pcie.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Baikal-T1 PCIe Root Port Controller > > > + > > > +maintainers: > > > + - Serge Semin <fancer.lancer@xxxxxxxxx> > > > + > > > +description: > > > + Embedded into Baikal-T1 SoC Root Complex controller. It's based on the > > > + DWC RC PCIe v4.60a IP-core, which is configured to have just a single Root > > > + Port function and is capable of establishing the link up to Gen.3 speed > > > + on x4 lanes. It doesn't have embedded clock and reset control module, so > > > + the proper interface initialization is supposed to be performed by software. > > > + > > > +select: > > > + properties: > > > + compatible: > > > + contains: > > > + const: baikal,bt1-pcie > > > + > > > + required: > > > + - compatible > > > + > > > +allOf: > > > + - $ref: /schemas/pci/snps,dw-pcie.yaml# > > > + > > > +properties: > > > + compatible: > > > + items: > > > + - const: baikal,bt1-pcie > > > + - const: snps,dw-pcie-4.60a > > > > > Pointless, you can read the version. > > The IP-core version CSR was first introduced in v4.70a. So by using > the version-based compatible string I advertise the actual IP-core > version. Ah, right. However, we generally haven't done this elsewhere and you aren't special. > > > > > > + - const: snps,dw-pcie > > > > > Pointless, because what can you do with this by itself? > > In general many things. For instance implement some IP-core specific > quirks in the generic part of the PCIe subsystem, visually identify > the device origin, etc. Experience has shown these are not useful. Drop it. Anything in the PCI core would probably use the RP VID/PID. Furthermore, there is no guarantee that you won't match and bind to the dw_plat_pcie_driver instead. The kernel has no mechanism to bind to the best match (which is further complicated with modules). > > > + reg: > > > + description: > > > + DBI, DBI2 and at least 4KB outbound iATU-capable region. > > > + maxItems: 3 > > > + > > > + reg-names: > > > + minItems: 3 > > > + maxItems: 3 > > > + items: > > > + enum: [ dbi, dbi2, config ] > > > > > This should define the order. > > Please, tell me why do you persist in the items being ordered? The > driver permits the relaxed order of the resources. Thus there is no > much need in such constraint. At least I can't find any. Tell me why you need random order. > > > + interrupts: > > > + description: > > > + MSI, AER, PME, Hot-plug, Link Bandwidth Management, Link Equalization > > > + request and eight Read/Write eDMA IRQ lines are available. > > > + maxItems: 14 > > > + > > > + interrupt-names: > > > + minItems: 14 > > > + maxItems: 14 > > > + items: > > > + oneOf: > > > + - pattern: '^dma[0-7]$' > > > + - enum: [ msi, aer, pme, hp, bw_mg, l_eq ] > > > > > Define the order. > > Fourteen IRQs? dma0, dma1, dma2, ..., msi, aer, ..., l_eq? If that's what the h/w has... > > > > > > + > > > + clocks: > > > + description: > > > + DBI (attached to the APB bus), AXI-bus master and slave interfaces > > > + are fed up by the dedicated application clocks. A common reference > > > + clock signal is supposed to be attached to the corresponding Ref-pad > > > + of the SoC. It will be redistributed amongst the controller core > > > + sub-modules (pipe, core, aux, etc). > > > + minItems: 4 > > > + maxItems: 4 > > > + > > > + clock-names: > > > + minItems: 4 > > > + maxItems: 4 > > > + items: > > > + enum: [ dbi, mstr, slv, ref ] > > > + > > > + resets: > > > + description: > > > + A comprehensive controller reset logic is supposed to be implemented > > > + by software, so almost all the possible application and core reset > > > + signals are exposed via the system CCU module. > > > + minItems: 9 > > > + maxItems: 9 > > > + > > > + reset-names: > > > + minItems: 9 > > > + maxItems: 9 > > > + items: > > > + enum: [ mstr, slv, pwr, hot, phy, core, pipe, sticky, non-sticky ] > > > + > > > + baikal,bt1-syscon: > > > + $ref: /schemas/types.yaml#/definitions/phandle > > > + description: > > > + Phandle to the Baikal-T1 System Controller DT node. It's required to > > > + access some additional PM, Reset-related and LTSSM signals. > > > + > > > + num-lanes: > > > + maximum: 4 > > > + > > > + max-link-speed: > > > + maximum: 3 > > > + > > > > > > + num-ob-windows: > > > + const: 4 > > > + > > > + num-ib-windows: > > > + const: 4 > > > > Remove these. They are deprecated and shouldn't be in new bindings. > > Aren't they deprecated in the framework of the DT nodes only? Yes, and that means don't use in new users. > Can't I still use them here to signify the number of iATU windows? No. Rob
