HI, Lee:
ChiYuan Huang <u0084500@xxxxxxxxx> 於 2022年6月27日 週一 晚上10:56寫道：
>
> Lee Jones <lee.jones@xxxxxxxxxx> 於 2022年6月27日 週一 晚上10:22寫道：
> >
> > On Wed, 22 Jun 2022, cy_huang wrote:
> >
> > > From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> > >
> > > Add Richtek RT5120 PMIC I2C driver.
> >
> > Why a whole new driver?
> >
> > How different is this to rt5033?
> >
> > Looks like this could easily be woven into this existing support?
> >
> It's different with the function domain.
> RT5033 is most like as the SubPMIC that includes PMU (battery
> charger/gauge/led/few buck and ldo)
> RT5120 is a main PMIC with default-on power that follows the boot on sequence.
> RT5120 only integrates regulator and power key report module.
>
Since I have explained the chip difference, do you still think it's
better to merge this code into rt5033 mfd?
> > > Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> > > ---
> > > drivers/mfd/Kconfig | 12 +++++
> > > drivers/mfd/Makefile | 1 +
> > > drivers/mfd/rt5120.c | 125 +++++++++++++++++++++++++++++++++++++++++++++++++++
> > > 3 files changed, 138 insertions(+)
> > > create mode 100644 drivers/mfd/rt5120.c
> > >
> > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > > index 3b59456..866619c 100644
> > > --- a/drivers/mfd/Kconfig
> > > +++ b/drivers/mfd/Kconfig
> > > @@ -1127,6 +1127,18 @@ config MFD_RT5033
> > > sub-devices like charger, fuel gauge, flash LED, current source,
> > > LDO and Buck.
> > >
> > > +config MFD_RT5120
> > > + tristate "Richtek RT5120 Power Management IC"
> > > + depends on I2C
> > > + select MFD_CORE
> > > + select REGMAP_I2C
> > > + select REGMAP_IRQ
> > > + help
> > > + The enables support for Richtek RT5120 PMIC. It includes four high
> > > + efficiency buck converters and one LDO voltage regulator. The device
> > > + is targeted at providing the CPU voltage, memory, I/O and peripheral
> > > + power rails in home entertainment devices.
> > > +
> > > config MFD_RC5T583
> > > bool "Ricoh RC5T583 Power Management system device"
> > > depends on I2C=y
> > > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > > index 858cacf..27e8add 100644
> > > --- a/drivers/mfd/Makefile
> > > +++ b/drivers/mfd/Makefile
> > > @@ -234,6 +234,7 @@ obj-$(CONFIG_MFD_HI655X_PMIC) += hi655x-pmic.o
> > > obj-$(CONFIG_MFD_DLN2) += dln2.o
> > > obj-$(CONFIG_MFD_RT4831) += rt4831.o
> > > obj-$(CONFIG_MFD_RT5033) += rt5033.o
> > > +obj-$(CONFIG_MFD_RT5120) += rt5120.o
> > > obj-$(CONFIG_MFD_SKY81452) += sky81452.o
> > >
> > > intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
> > > diff --git a/drivers/mfd/rt5120.c b/drivers/mfd/rt5120.c
> > > new file mode 100644
> > > index 00000000..e7c5f3c
> > > --- /dev/null
> > > +++ b/drivers/mfd/rt5120.c
> > > @@ -0,0 +1,125 @@
> > > +// SPDX-License-Identifier: GPL-2.0+
> > > +
> > > +#include <linux/i2c.h>
> > > +#include <linux/kernel.h>
> > > +#include <linux/mfd/core.h>
> > > +#include <linux/module.h>
> > > +#include <linux/mod_devicetable.h>
> > > +#include <linux/regmap.h>
> > > +
> > > +#define RT5120_REG_INTENABLE 0x1D
> > > +#define RT5120_REG_INTSTAT 0x1E
> > > +#define RT5120_REG_FZCMODE 0x44
> > > +
> > > +#define RT5120_INT_HOTDIE 0
> > > +#define RT5120_INT_PWRKEY_REL 5
> > > +#define RT5120_INT_PWRKEY_PRESS 6
> > > +
> > > +static const struct regmap_range rt5120_rd_yes_ranges[] = {
> > > + regmap_reg_range(0x03, 0x13),
> > > + regmap_reg_range(0x1c, 0x20),
> > > + regmap_reg_range(0x44, 0x44)
> > > +};
> > > +
> > > +static const struct regmap_range rt5120_wr_yes_ranges[] = {
> > > + regmap_reg_range(0x06, 0x13),
> > > + regmap_reg_range(0x1c, 0x20),
> > > + regmap_reg_range(0x44, 0x44)
> > > +};
> > > +
> > > +static const struct regmap_access_table rt5120_rd_table = {
> > > + .yes_ranges = rt5120_rd_yes_ranges,
> > > + .n_yes_ranges = ARRAY_SIZE(rt5120_rd_yes_ranges),
> > > +};
> > > +
> > > +static const struct regmap_access_table rt5120_wr_table = {
> > > + .yes_ranges = rt5120_wr_yes_ranges,
> > > + .n_yes_ranges = ARRAY_SIZE(rt5120_wr_yes_ranges),
> > > +};
> > > +
> > > +static const struct regmap_config rt5120_regmap_config = {
> > > + .reg_bits = 8,
> > > + .val_bits = 8,
> > > + .max_register = RT5120_REG_FZCMODE,
> > > +
> > > + .wr_table = &rt5120_wr_table,
> > > + .rd_table = &rt5120_rd_table,
> > > +};
> > > +
> > > +static const struct regmap_irq rt5120_irqs[] = {
> > > + REGMAP_IRQ_REG_LINE(RT5120_INT_HOTDIE, 8),
> > > + REGMAP_IRQ_REG_LINE(RT5120_INT_PWRKEY_REL, 8),
> > > + REGMAP_IRQ_REG_LINE(RT5120_INT_PWRKEY_PRESS, 8)
> > > +};
> > > +
> > > +static const struct regmap_irq_chip rt5120_irq_chip = {
> > > + .name = "rt5120-pmic",
> > > + .status_base = RT5120_REG_INTSTAT,
> > > + .mask_base = RT5120_REG_INTENABLE,
> > > + .ack_base = RT5120_REG_INTSTAT,
> > > + .mask_invert = true,
> > > + .use_ack = true,
> > > + .num_regs = 1,
> > > + .irqs = rt5120_irqs,
> > > + .num_irqs = ARRAY_SIZE(rt5120_irqs),
> > > +};
> > > +
> > > +static const struct resource rt5120_regulator_resources[] = {
> > > + DEFINE_RES_IRQ(RT5120_INT_HOTDIE)
> > > +};
> > > +
> > > +static const struct resource rt5120_pwrkey_resources[] = {
> > > + DEFINE_RES_IRQ_NAMED(RT5120_INT_PWRKEY_PRESS, "pwrkey-press"),
> > > + DEFINE_RES_IRQ_NAMED(RT5120_INT_PWRKEY_REL, "pwrkey-release")
> > > +};
> > > +
> > > +static const struct mfd_cell rt5120_devs[] = {
> > > + MFD_CELL_RES("rt5120-regulator", rt5120_regulator_resources),
> > > + MFD_CELL_OF("rt5120-pwrkey", rt5120_pwrkey_resources, NULL, 0, 0,
> > > + "richtek,rt5120-pwrkey")
> > > +};
> > > +
> > > +static int rt5120_probe(struct i2c_client *i2c)
> > > +{
> > > + struct regmap *regmap;
> > > + struct regmap_irq_chip_data *irq_data;
> > > + int ret;
> > > +
> > > + regmap = devm_regmap_init_i2c(i2c, &rt5120_regmap_config);
> > > + if (IS_ERR(regmap)) {
> > > + ret = PTR_ERR(regmap);
> > > + dev_err(&i2c->dev, "Failed to init regmap (%d)\n", ret);
> > > + return ret;
> > > + }
> > > +
> > > + ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, i2c->irq,
> > > + IRQF_ONESHOT, 0, &rt5120_irq_chip,
> > > + &irq_data);
> > > + if (ret) {
> > > + dev_err(&i2c->dev, "Failed to add irq chip (%d)\n", ret);
> > > + return ret;
> > > + }
> > > +
> > > + return devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, rt5120_devs,
> > > + ARRAY_SIZE(rt5120_devs), NULL, 0,
> > > + regmap_irq_get_domain(irq_data));
> > > +}
> > > +
> > > +static const struct of_device_id rt5120_device_match_table[] = {
> > > + { .compatible = "richtek,rt5120", },
> > > + {}
> > > +};
> > > +MODULE_DEVICE_TABLE(of, rt5120_device_match_table);
> > > +
> > > +static struct i2c_driver rt5120_driver = {
> > > + .driver = {
> > > + .name = "rt5120",
> > > + .of_match_table = rt5120_device_match_table,
> > > + },
> > > + .probe_new = rt5120_probe,
> > > +};
> > > +module_i2c_driver(rt5120_driver);
> > > +
> > > +MODULE_AUTHOR("ChiYuan Huang <cy_huang@xxxxxxxxxxx>");
> > > +MODULE_DESCRIPTION("Richtek RT5120 I2C driver");
> > > +MODULE_LICENSE("GPL v2");
> >
> > --
> > Lee Jones [李琼斯]
> > Principal Technical Lead - Developer Services
> > Linaro.org │ Open source software for Arm SoCs
> > Follow Linaro: Facebook | Twitter | Blog
