On 01/07/2022 06:29, Nishanth Menon wrote: > The adcxx4s communicates with a host processor via an SPI/Microwire Bus > interface. The device family responds with 12bit data, of which the LSB > bits are 0 for the lower resolution devices. I have been able to test > adc102s051, hence adding just the missing ones in that family. > > Lets reuse the binding to support the family of devices with name > ADC<bb><c>S<sss>, where > * bb is the resolution in number of bits (8, 10, 12) > * c is the number of channels (1, 2, 4, 8) > * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 kSPS > and 101 for 1 MSPS) > > Complete datasheets are available at TI's website here: > https://www.ti.com/lit/gpn/adc<bb><c>s<sss>.pdf > > Handling of 8, 10 and 12 bits converters are the same, the > unavailable bits are 0 in LSB :) > > Inspired-by: drivers/hwmon/adcxx.c > > Signed-off-by: Nishanth Menon <nm@xxxxxx> > --- > > Checkpatch does complain with Inspired-by: insisting it to be an email > address.. but I was really inspired by the hwmon driver.. Don't know > what else to say here.. we could probably drop it? Drop it or convert to just test. When passing checkpatch: Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Best regards, Krzysztof
