Hi Russell,
Thanks for the review comment.
On Thu, 2022-06-30 at 12:42 +0100, Russell King (Oracle) wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
>
> On Thu, Jun 30, 2022 at 03:50:39PM +0530, Arun Ramadoss wrote:
> > +static void lan937x_config_gbit(struct ksz_device *dev, bool gbit,
> > u8 *data)
> > +{
> > + if (gbit)
> > + *data &= ~PORT_MII_NOT_1GBIT;
> > + else
> > + *data |= PORT_MII_NOT_1GBIT;
> > +}
> > +
> > +static void lan937x_config_interface(struct ksz_device *dev, int
> > port,
> > + int speed, int duplex,
> > + bool tx_pause, bool rx_pause)
> > +{
> > + u8 xmii_ctrl0, xmii_ctrl1;
> > +
> > + ksz_pread8(dev, port, REG_PORT_XMII_CTRL_0, &xmii_ctrl0);
> > + ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &xmii_ctrl1);
> > +
> > + switch (speed) {
> > + case SPEED_1000:
> > + lan937x_config_gbit(dev, true, &xmii_ctrl1);
> > + break;
> > + case SPEED_100:
> > + lan937x_config_gbit(dev, false, &xmii_ctrl1);
> > + xmii_ctrl0 |= PORT_MII_100MBIT;
> > + break;
> > + case SPEED_10:
> > + lan937x_config_gbit(dev, false, &xmii_ctrl1);
> > + xmii_ctrl0 &= ~PORT_MII_100MBIT;
> > + break;
> > + default:
> > + dev_err(dev->dev, "Unsupported speed on port %d:
> > %d\n",
> > + port, speed);
> > + return;
> > + }
>
> Isn't this:
>
> if (speed == SPEED_1000)
> xmii_ctrl1 &= ~PORT_MII_NOT_1GBIT;
> else
> xmii_ctrl1 |= PORT_MII_NOT_1GBIT;
>
> if (speed == SPEED_100)
> xmii_ctrl0 |= PORT_MII_100MBIT;
> else
> xmii_ctrl0 &= ~PORT_MII_100MBIT;
>
> There isn't much need to validate that "speed" is correct, you've
> already told phylink that you only support 1G, 100M and 10M so you're
> not going to get called with anything except one of those.
Ok, I will update the code.
>
> > +
> > + if (duplex)
> > + xmii_ctrl0 |= PORT_MII_FULL_DUPLEX;
> > + else
> > + xmii_ctrl0 &= ~PORT_MII_FULL_DUPLEX;
> > +
> > + if (tx_pause)
> > + xmii_ctrl0 |= PORT_MII_TX_FLOW_CTRL;
> > + else
> > + xmii_ctrl1 &= ~PORT_MII_TX_FLOW_CTRL;
>
> It seems weird to set a bit in one register and clear it in a
> different
> register. I suspect you mean xmii_ctrl0 here.
Sorry, its a typo mistake. I will update the register.
>
> > +
> > + if (rx_pause)
> > + xmii_ctrl0 |= PORT_MII_RX_FLOW_CTRL;
> > + else
> > + xmii_ctrl0 &= ~PORT_MII_RX_FLOW_CTRL;
> > +
> > + ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_0, xmii_ctrl0);
> > + ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, xmii_ctrl1);
> > +}
> > +
>
> Thanks!
>
> --
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
