Re: [PATCH v2] i2c: axxia: Add I2C driver for AXM55xx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 09/29/2014 04:43 PM, Anders Berg wrote:
On Mon, Sep 29, 2014 at 12:07 PM, Varka Bhadram <varkabhadram@xxxxxxxxx> wrote:
On 09/29/2014 03:02 PM, Anders Berg wrote:
Add I2C bus driver for the controller found in the LSI Axxia family SoCs.
The
driver implements 10-bit addressing and SMBus transfer modes via emulation
(including SMBus block data read).

Signed-off-by: Anders Berg <anders.berg@xxxxxxxxxxxxx>
---

(...)
+
+       if (!idev->msg) {
+               dev_warn(idev->dev, "unexpected interrupt");

Missed terminating new line '\n'

Right, I'll fix that (all occurrences)

+               goto out;
+       }
+
+       /* RX FIFO needs service? */
+       if (i2c_m_rd(idev->msg) && (status & MST_STATUS_RFL))
+               axxia_i2c_empty_rx_fifo(idev);
+
+       /* TX FIFO needs service? */
+       if (!i2c_m_rd(idev->msg) && (status & MST_STATUS_TFL)) {
+               if (axxia_i2c_fill_tx_fifo(idev) == 0)
+                       i2c_int_disable(idev, MST_STATUS_TFL);
+       }
+
+       if (status & MST_STATUS_SCC) {
+               /* Stop completed */
+               i2c_int_disable(idev, ~0);
+               complete(&idev->msg_complete);
+       } else if (status & MST_STATUS_SNS) {
+               /* Transfer done */
+               i2c_int_disable(idev, ~0);
+               if (i2c_m_rd(idev->msg) && idev->msg_xfrd <
idev->msg->len)
+                       axxia_i2c_empty_rx_fifo(idev);
+               complete(&idev->msg_complete);
+       } else if (unlikely(status & MST_STATUS_ERR)) {
+               /* Transfer error */
+               i2c_int_disable(idev, ~0);
+               if (status & MST_STATUS_AL)
+                       idev->msg_err = -EAGAIN;
+               else if (status & MST_STATUS_NAK)
+                       idev->msg_err = -ENXIO;
+               else
+                       idev->msg_err = -EIO;
+               dev_dbg(idev->dev, "error %#x, addr=%#x rx=%u/%u
tx=%u/%u\n",
+                       status,
+                       idev->msg->addr,
+                       readl(idev->base + MST_RX_BYTES_XFRD),
+                       readl(idev->base + MST_RX_XFER),
+                       readl(idev->base + MST_TX_BYTES_XFRD),
+                       readl(idev->base + MST_TX_XFER));
+               complete(&idev->msg_complete);
+       }
+
+out:
+       /* Clear interrupt */
+       writel(INT_MST, idev->base + INTERRUPT_STATUS);
+
+       return IRQ_HANDLED;
+}
+

Its looks good if we move the entire ISR above probe/remove
functionalities...

Not sure what you mean here... The ISR _is_ above probe/remove.

I mean ISR should immediately above probe functionality. So that we can see
devm_request_irq(..,isr_name,..) ISR directly with isr name..

--
Regards,
Varka Bhadram.

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux