On Thu, Jun 30, 2022 at 06:01:09PM +0000, Conor.Dooley@xxxxxxxxxxxxx wrote: > On 30/06/2022 18:53, Sudeep Holla wrote: > > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > > > On Thu, Jun 30, 2022 at 04:28:26PM +0000, Niklas Cassel wrote: > >> On Wed, Jun 29, 2022 at 07:43:29PM +0100, Conor Dooley wrote: > >>> From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> > >>> > >>> Hey all, > >>> This series should rid us of dtbs_check errors for the RISC-V Canaan k210 > >>> based boards. To make keeping it that way a little easier, I changed the > >>> Canaan devicetree Makefile so that it would build all of the devicetrees > >>> in the directory if SOC_CANAAN. > >>> > >>> I *DO NOT* have any Canaan hardware so I have not tested any of this in > >>> action. Since I sent v1, I tried to buy some since it's cheap - but could > >>> out of the limited stockists none seemed to want to deliver to Ireland :( > >>> I based the series on next-20220617. > >>> > >> > >> I first tried to apply your series on top of next-20220630, > >> but was greeted by a bunch of different warnings on boot, > >> including endless RCU stall warnings. > >> However, even when booting next-20220630 without your patches, > >> I got the same warnings and RCU stall. > >> > > > > Is it possible to share the boot logs please ? > > Conor is having issues with my arch_topology/cacheinfo updates in -next. > > I would like to know if your issue is related to that or not ? > > > >> So I tested your series on top of v5.19-rc4 + > >> commit 0397d50f4cad ("spi: dt-bindings: Move 'rx-sample-delay-ns' to > >> spi-peripheral-props.yaml") cherry-picked, > >> (in order to avoid conflicts when applying your series,) > >> and the board was working as intended, no warnings or RCU stalls. > >> > > > > If possible can you give this branch[1] a try where my changes are and doesn't > > have any other changes from -next. Sorry to bother you. > > > > Conor seem to have issue with this commit[2], so if you get issues try to > > check if [3] works. > > FWIW, my problems with that are not on canaan hw. I understand that, just helps to eliminate and see what are the possible issues. -- Regards, Sudeep