These patches adds dt nodes for RPM, USB and SATA IPs found in APQ8064. All the driver support for these IPs are already available in v3.17, except the RPM driver which is now accepted by Lee and Mark. These patches depend on the header file from http://www.spinics.net/lists/arm-kernel/msg364310.html for regulators. Now that the RPM patch is accepted, should RPM patch go via arm-soc tree? so that we can get more functionality on IFC6410 board in v3.18 mainline. All these patches are tested on IFC6410 board. Am hoping to get these patches for v3.18, as these patches were sitting in my dev tree since last 3 merge windows. Thanks, srini Srinivas Kandagatla (4): ARM: DT: apq8064: add rpm support ARM: DT: apq8064: Add usb host support. ARM: DT: apq8064: Add USB OTG support ARM: DT: apq8064: Add SATA controller support. arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 30 +++++ arch/arm/boot/dts/qcom-apq8064.dtsi | 190 +++++++++++++++++++++++++++++ 2 files changed, 220 insertions(+) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
