All machines of the Asurada platform have a touchscreen at address 0x10
in the I2C0 bus, but the devices vary: Spherion has the Elan eKTH3500
touchscreen, while Hayato has a generic HID-over-i2c touchscreen.
Add common support for the touchscreens on the platform and the
specifics in each board file.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Tested-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
---
(no changes since v1)
.../dts/mediatek/mt8192-asurada-hayato-r1.dts | 7 ++++++
.../mediatek/mt8192-asurada-spherion-r0.dts | 4 +++
.../boot/dts/mediatek/mt8192-asurada.dtsi | 25 +++++++++++++++++++
3 files changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
index ca18fcf2ad4f..1e91491945f6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
@@ -38,3 +38,10 @@ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
CROS_STD_MAIN_KEYMAP
>;
};
+
+&touchscreen {
+ compatible = "hid-over-i2c";
+ post-power-on-delay-ms = <10>;
+ hid-descr-addr = <0x0001>;
+ vdd-supply = <&pp3300_u>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
index 30b03895de41..42db81e95fae 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
@@ -40,3 +40,7 @@ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
CROS_STD_MAIN_KEYMAP
>;
};
+
+&touchscreen {
+ compatible = "elan,ekth3500";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index 4de4235cb768..6eace280c14a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -92,6 +92,13 @@ &i2c0 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
+
+ touchscreen: touchscreen@10 {
+ reg = <0x10>;
+ interrupts-extended = <&pio 21 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+ };
};
&i2c1 {
@@ -454,6 +461,24 @@ pins-int-n {
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
};
};
+
+ touchscreen_pins: touchscreen-default-pins {
+ pins-irq {
+ pinmux = <PINMUX_GPIO21__FUNC_GPIO21>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins-reset {
+ pinmux = <PINMUX_GPIO137__FUNC_GPIO137>;
+ output-high;
+ };
+
+ pins-report-sw {
+ pinmux = <PINMUX_GPIO138__FUNC_GPIO138>;
+ output-low;
+ };
+ };
};
&spi1 {
--
2.36.1
