From: ChiYuan Huang <cy_huang@xxxxxxxxxxx> This patch series is to enable Richtek RTQ6056 support. The RTQ6056 is a high accuracy current-sense monitor with I2C interface, and the device provides full information for system by reading out the load current and power. Since v2 - Change the resistor property name to be generic 'shunt-resistor-micro-ohms'. - Rename file from 'rtq6056-adc' to 'rtq6056'. - Refine the ABI, if generic already defined it, remove it and check the channel report unit. - Add copyright text. - include the correct header. - change the property parsing name. - To use iio_chan_spec address field. - Refine each channel separate and shared_by_all. - Use pm_runtime and pm_runtime_autosuspend. - Remove the shutdown callback. From the HW suggestion, it's not recommended to use battery as the power supply. - Check all scale unit (voltage->mV, current->mA, power->milliWatt). - Use the read_avail to provide the interface for attribute value list. - Add comma for the last element in the const integer array. - Refine each ADC label text. - In read_label callback, replace snprintf to sysfs_emit. ChiYuan Huang (2): dt-bindings: iio: adc: Add rtq6056 adc support iio: adc: Add rtq6056 support .../ABI/testing/sysfs-bus-iio-adc-rtq6056 | 6 + .../bindings/iio/adc/richtek,rtq6056.yaml | 56 ++ drivers/iio/adc/Kconfig | 15 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/rtq6056.c | 670 +++++++++++++++++++++ 5 files changed, 748 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-rtq6056 create mode 100644 Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml create mode 100644 drivers/iio/adc/rtq6056.c -- 2.7.4
