Re: [PATCH v3 3/4] dt-bindings: arm: msm: Rework kpss-gcc driver Documentation to yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 28 Jun 2022 20:41:36 +0200, Christian Marangi wrote:
> Rework kpss-gcc driver Documentation to yaml Documentation.
> The current kpss-gcc Documentation have major problems and can't be
> converted directly. Introduce various changes to the original
> Documentation.
> 
> Add #clock-cells additional binding as this clock outputs a static clk
> named acpu_l2_aux with supported compatible.
> Only some compatible require and outputs a clock, for the others, set
> only the reg as a required binding to correctly export the kpss-gcc
> registers. As the reg is shared also add the required syscon compatible.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> ---
>  .../bindings/arm/msm/qcom,kpss-gcc.txt        | 44 ---------
>  .../bindings/arm/msm/qcom,kpss-gcc.yaml       | 89 +++++++++++++++++++
>  2 files changed, 89 insertions(+), 44 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
>  create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml: patternProperties:^thermistor@:properties:adi,excitation-current-nanoamp: '$ref' should not be valid under {'const': '$ref'}
	hint: Standard unit suffix properties don't need a type $ref
	from schema $id: http://devicetree.org/meta-schemas/core.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml: ignoring, error in schema: patternProperties: ^thermistor@: properties: adi,excitation-current-nanoamp
Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.example.dtb:0:0: /example-0/spi/ltc2983@0: failed to match any schema with compatible: ['adi,ltc2983']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux