Re: [PATCH v2 13/17] driver core: Use device's fwnode to check if it is waiting for suppliers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22-06-28 18:24:29, Abel Vesa wrote:
> On 22-06-27 15:30:25, Saravana Kannan wrote:
> > On Mon, Jun 27, 2022 at 4:42 AM Abel Vesa <abel.vesa@xxxxxxxxxx> wrote:
> > >

Oups, forget this reply since it not to the right message-id.

Will do it properly right now.


> > > On 20-11-20 18:02:28, Saravana Kannan wrote:
> > > > To check if a device is still waiting for its supplier devices to be
> > > > added, we used to check if the devices is in a global
> > > > waiting_for_suppliers list. Since the global list will be deleted in
> > > > subsequent patches, this patch stops using this check.
> > > >
> > > > Instead, this patch uses a more device specific check. It checks if the
> > > > device's fwnode has any fwnode links that haven't been converted to
> > > > device links yet.
> > > >
> > > > Signed-off-by: Saravana Kannan <saravanak@xxxxxxxxxx>
> > > > ---
> > > >  drivers/base/core.c | 18 ++++++++----------
> > > >  1 file changed, 8 insertions(+), 10 deletions(-)
> > > >
> > > > diff --git a/drivers/base/core.c b/drivers/base/core.c
> > > > index 395dece1c83a..1873cecb0cc4 100644
> > > > --- a/drivers/base/core.c
> > > > +++ b/drivers/base/core.c
> > > > @@ -51,6 +51,7 @@ static DEFINE_MUTEX(wfs_lock);
> > > >  static LIST_HEAD(deferred_sync);
> > > >  static unsigned int defer_sync_state_count = 1;
> > > >  static DEFINE_MUTEX(fwnode_link_lock);
> > > > +static bool fw_devlink_is_permissive(void);
> > > >
> > > >  /**
> > > >   * fwnode_link_add - Create a link between two fwnode_handles.
> > > > @@ -995,13 +996,13 @@ int device_links_check_suppliers(struct device *dev)
> > > >        * Device waiting for supplier to become available is not allowed to
> > > >        * probe.
> > > >        */
> > > > -     mutex_lock(&wfs_lock);
> > > > -     if (!list_empty(&dev->links.needs_suppliers) &&
> > > > -         dev->links.need_for_probe) {
> > > > -             mutex_unlock(&wfs_lock);
> > > > +     mutex_lock(&fwnode_link_lock);
> > > > +     if (dev->fwnode && !list_empty(&dev->fwnode->suppliers) &&
> > > > +         !fw_devlink_is_permissive()) {
> > > > +             mutex_unlock(&fwnode_link_lock);
> > >
> > > Hi Saravana,
> > >
> > > First of, sorry for going back to this.
> >
> > No worries at all. If there's an issue with fw_devlink, I want to have it fixed.
> >
> > > There is a scenario where this check will not work and probably should
> > > work. It goes like this:
> > >
> > > A clock controller is not allowed to probe because it uses a clock from a child device of a
> > > consumer, like so:
> > >
> > >         dispcc: clock-controller@af00000 {
> > >                 clocks = <&dsi0_phy 0>;
> > >         };
> > >
> > >         mdss: mdss@ae00000 {
> > >                 clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
> > >
> > >                 dsi0_phy: dsi-phy@ae94400 {
> > >                         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> > >                 };
> > >         };
> > >
> > > This is a real scenario actually, but I stripped it down to the essentials.
> >
> > I'm well aware of this scenario and explicitly wrote code to address this :)
> >
>
> Actually, the problem seems to be when you have two dsi phys.
> Like so:
>
>          dispcc: clock-controller@af00000 {
>                  clocks = <&dsi0_phy 0>;
>                  clocks = <&dsi1_phy 0>;
>          };
>
>          mdss: mdss@ae00000 {
>                  clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
>
>                  dsi0_phy: dsi-phy@ae94400 {
>                          clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
>                  };
>
> 		 dsi1_phy: dsi-phy@ae64400 {
>                          clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
>                  };
>          };
>
> And from what I've seen happening so far is that the device_is_dependent
> check for the parent of the supplier (if it also a consumer) seems to return
> false on second pass of the same link due to the DL_FLAG_SYNC_STATE_ONLY
> being set this time around.
>
> > See this comment in fw_devlink_create_devlink()
> >
> >        /*
> >          * If we can't find the supplier device from its fwnode, it might be
> >          * due to a cyclic dependency between fwnodes. Some of these cycles can
> >          * be broken by applying logic. Check for these types of cycles and
> >          * break them so that devices in the cycle probe properly.
> >          *
> >          * If the supplier's parent is dependent on the consumer, then the
> >          * consumer and supplier have a cyclic dependency. Since fw_devlink
> >          * can't tell which of the inferred dependencies are incorrect, don't
> >          * enforce probe ordering between any of the devices in this cyclic
> >          * dependency. Do this by relaxing all the fw_devlink device links in
> >          * this cycle and by treating the fwnode link between the consumer and
> >          * the supplier as an invalid dependency.
> >          */
> >
>
> So when this thing you mentioned above is happening for the second dsi
> phy (order doesn't matter), since the dsi phy itself cannot be found,
> the device_is_dependent is run for the same link: dispcc -> mdss
> (supplier -> consumer), but again, since it has the
> DL_FLAG_SYNC_STATE_ONLY this time around, it will skip that specific
> link.
>
> > Applying this comment to your example, dispcc is the "consumer",
> > dsi0_phy is the "supplier" and mdss is the "supplier's parent".
> >
> > And because we can't guarantee the order of addition of these top
> > level devices is why I also have this piece of recursive call inside
> > __fw_devlink_link_to_suppliers():
> >
> >                 /*
> >                  * If a device link was successfully created to a supplier, we
> >                  * now need to try and link the supplier to all its suppliers.
> >                  *
> >                  * This is needed to detect and delete false dependencies in
> >                  * fwnode links that haven't been converted to a device link
> >                  * yet. See comments in fw_devlink_create_devlink() for more
> >                  * details on the false dependency.
> >                  *
> >                  * Without deleting these false dependencies, some devices will
> >                  * never probe because they'll keep waiting for their false
> >                  * dependency fwnode links to be converted to device links.
> >                  */
> >                 sup_dev = get_dev_from_fwnode(sup);
> >                 __fw_devlink_link_to_suppliers(sup_dev, sup_dev->fwnode);
> >                 put_device(sup_dev);
> >
> > So when mdss gets added, we'll link it to dispcc and then check if
> > dispcc has any suppliers it needs to link to. And that's when the
> > logic will catch the cycle and fix it.
> >
> > Can you tell me why this wouldn't unblock the probing of dispcc? Are
> > you actually hitting this on a device? If so, can you please check why
> > this logic isn't sufficient to catch and undo the cycle?
> >
>
> This is happening on Qualcomm SDM845 with Linus's tree.
>
> > Thanks,
> > Saravana
> >
> > > So, the dsi0_phy will be "device_add'ed" (through of_platform_populate) by the mdss probe.
> > > The mdss will probe defer waiting for the DISP_CC_MDSS_MDP_CLK, while
> > > the dispcc will probe defer waiting for the dsi0_phy (supplier).
> > >
> > > Basically, this 'supplier availability check' does not work when a supplier might
> > > be populated by a consumer of the device that is currently trying to probe.
> > >
> > >
> > > Abel
> > >
> > >
> > > >               return -EPROBE_DEFER;
> > > >       }
> > > > -     mutex_unlock(&wfs_lock);
> > > > +     mutex_unlock(&fwnode_link_lock);
> > > >
> > > >       device_links_write_lock();
> > > >
> > > > @@ -1167,10 +1168,7 @@ static ssize_t waiting_for_supplier_show(struct device *dev,
> > > >       bool val;
> > > >
> > > >       device_lock(dev);
> > > > -     mutex_lock(&wfs_lock);
> > > > -     val = !list_empty(&dev->links.needs_suppliers)
> > > > -           && dev->links.need_for_probe;
> > > > -     mutex_unlock(&wfs_lock);
> > > > +     val = !list_empty(&dev->fwnode->suppliers);
> > > >       device_unlock(dev);
> > > >       return sysfs_emit(buf, "%u\n", val);
> > > >  }
> > > > @@ -2202,7 +2200,7 @@ static int device_add_attrs(struct device *dev)
> > > >                       goto err_remove_dev_groups;
> > > >       }
> > > >
> > > > -     if (fw_devlink_flags && !fw_devlink_is_permissive()) {
> > > > +     if (fw_devlink_flags && !fw_devlink_is_permissive() && dev->fwnode) {
> > > >               error = device_create_file(dev, &dev_attr_waiting_for_supplier);
> > > >               if (error)
> > > >                       goto err_remove_dev_online;
> > > > --
> > > > 2.29.2.454.gaff20da3a2-goog
> > > >
> > > >
> >



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux