Re: [PATCH v14 12/15] drm/mediatek: dpi: Add YUV422 output support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2022-06-28 at 11:01 +0800, Rex-BC Chen wrote:
> On Tue, 2022-06-28 at 10:38 +0800, CK Hu wrote:
> > On Tue, 2022-06-28 at 10:28 +0800, Rex-BC Chen wrote:
> > > On Tue, 2022-06-28 at 10:15 +0800, CK Hu wrote:
> > > > Hi, Bo-Chen:
> > > > 
> > > > On Fri, 2022-06-24 at 11:09 +0800, Bo-Chen Chen wrote:
> > > > > Dp_intf supports YUV422 as output format. In MT8195 Chrome
> > > > > project,
> > > > > YUV422 output format is used for 4K resolution.
> > > > > 
> > > > > To support this, it is also needed to support color format
> > > > > transfer.
> > > > > Color format transfer is a new feature for both dpi and
> > > > > dpintf
> > > > > of
> > > > > MT8195.
> > > > > 
> > > > > The input format could be RGB888 and output format for
> > > > > dp_intf
> > > > > should
> > > > > be
> > > > > YUV422. Therefore, we add a mtk_dpi_matrix_sel() helper to
> > > > > update
> > > > > the
> > > > > DPI_MATRIX_SET register depending on the color format.
> > > > > 
> > > > > Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
> > > > > Signed-off-by: Bo-Chen Chen <rex-bc.chen@xxxxxxxxxxxx>
> > > > > Reviewed-by: AngeloGioacchino Del Regno <
> > > > > angelogioacchino.delregno@xxxxxxxxxxxxx>
> > > > > ---
> > > > >  drivers/gpu/drm/mediatek/mtk_dpi.c      | 34
> > > > > ++++++++++++++++++++++++-
> > > > >  drivers/gpu/drm/mediatek/mtk_dpi_regs.h |  3 +++
> > > > >  2 files changed, 36 insertions(+), 1 deletion(-)
> > > > > 
> > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > > > b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > > > index 9e4250356342..438bf3bc5e4a 100644
> > > > > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > > > @@ -128,6 +128,7 @@ struct mtk_dpi_yc_limit {
> > > > >   * @num_output_fmts: Quantity of supported output formats.
> > > > >   * @is_ck_de_pol: Support CK/DE polarity.
> > > > >   * @swap_input_support: Support input swap function.
> > > > > + * @color_fmt_trans_support: Enable color format transfer.
> > > > >   * @dimension_mask: Mask used for HWIDTH, HPORCH,
> > > > > VSYNC_WIDTH
> > > > > and
> > > > > VSYNC_PORCH
> > > > >   *		    (no shift).
> > > > >   * @hvsize_mask: Mask of HSIZE and VSIZE mask (no shift).
> > > > > @@ -144,6 +145,7 @@ struct mtk_dpi_conf {
> > > > >  	u32 num_output_fmts;
> > > > >  	bool is_ck_de_pol;
> > > > >  	bool swap_input_support;
> > > > > +	bool color_fmt_trans_support;
> > > > >  	u32 dimension_mask;
> > > > >  	u32 hvsize_mask;
> > > > >  	u32 channel_swap_shift;
> > > > > @@ -412,6 +414,31 @@ static void
> > > > > mtk_dpi_config_disable_edge(struct
> > > > > mtk_dpi *dpi)
> > > > >  		mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0,
> > > > > EDGE_SEL_EN);
> > > > >  }
> > > > >  
> > > > > +static void mtk_dpi_matrix_sel(struct mtk_dpi *dpi,
> > > > > +			       enum mtk_dpi_out_color_format
> > > > > format)
> > > > > +{
> > > > > +	u32 matrix_sel = 0;
> > > > > +
> > > > > +	if (!dpi->conf->color_fmt_trans_support) {
> > > > > +		dev_info(dpi->dev, "matrix_sel is not
> > > > > supported.\n");
> > > > > +		return;
> > > > > +	}
> > > > > +
> > > > > +	switch (format) {
> > > > > +	case MTK_DPI_COLOR_FORMAT_YCBCR_422:
> > > > > +	case MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL:
> > > > > +	case MTK_DPI_COLOR_FORMAT_YCBCR_444:
> > > > > +	case MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL:
> > > > 
> > > > I think the transform formula are different for full range and
> > > > non-
> > > > full 
> > > > range. Please make sure '0x2' is for full range or non-full
> > > > range.
> > > > If
> > > > you are not sure, you could provide the transform matrix of
> > > > '0x2'
> > > > so
> > > > we
> > > > could find out it's full or non-full.
> > > > 
> > > > > +	case MTK_DPI_COLOR_FORMAT_XV_YCC:
> > > > > +		if (dpi->mode.hdisplay <= 720)
> > > > > +			matrix_sel = 0x2;
> > > > 
> > > > Symbolize '0x2'.
> > > > 
> > > > > +		break;
> > > > > +	default:
> > > > > +		break;
> > > > > +	}
> > > > > +	mtk_dpi_mask(dpi, DPI_MATRIX_SET, matrix_sel,
> > > > > INT_MATRIX_SEL_MASK);
> > > > > +}
> > > > > +
> > > > >  static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
> > > > >  					enum
> > > > > mtk_dpi_out_color_format
> > > > > format)
> > > > >  {
> > > > > @@ -419,6 +446,7 @@ static void
> > > > > mtk_dpi_config_color_format(struct
> > > > > mtk_dpi *dpi,
> > > > >  	    (format == MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL)) {
> > > > >  		mtk_dpi_config_yuv422_enable(dpi, false);
> > > > >  		mtk_dpi_config_csc_enable(dpi, true);
> > > > > +		mtk_dpi_matrix_sel(dpi, format);
> > > > 
> > > > Why mt8173 support MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL but it
> > > > does
> > > > not
> > > > call mtk_dpi_matrix_sel()? It seems that mt8173 also need to
> > > > call
> > > > mtk_dpi_matrix_sel() but lost and this patch looks like a bug
> > > > fix
> > > > for
> > > > all SoC DPI driver.
> > > > 
> > > > Regards,
> > > > CK
> > > > 
> > > 
> > > Hello CK,
> > > 
> > > MT8173 does not support MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL as
> > > output
> > > format, the output format is:
> > > 
> > > static const u32 mt8173_output_fmts[] = {
> > > 	MEDIA_BUS_FMT_RGB888_1X24,
> > > };
> > > 
> > > or do I misunderstand?
> > 
> > In the first patch [1], it define
> > 
> > +enum mtk_dpi_out_color_format {
> > +	MTK_DPI_COLOR_FORMAT_RGB,
> > +	MTK_DPI_COLOR_FORMAT_RGB_FULL,
> > +	MTK_DPI_COLOR_FORMAT_YCBCR_444,
> > +	MTK_DPI_COLOR_FORMAT_YCBCR_422,
> > +	MTK_DPI_COLOR_FORMAT_XV_YCC,
> > +	MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL,
> > +	MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL
> > +};
> > 
> > and this function also process MTK_DPI_COLOR_FORMAT_YCBCR_444,
> > MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL,
> > MTK_DPI_COLOR_FORMAT_YCBCR_422,
> > and MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL. So I think it want to
> > process
> > output YUV but the caller of mtk_dpi_config_color_format() just
> > pass
> > RGB into this function. If mt8173 does not support YUV output, I
> > think
> > you should remove YUV processing in this function first, and then
> > add
> > back YUV processing in this function.
> > 
> > [1] 
> > 
> 
> 
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/gpu/drm/mediatek/mtk_dpi.c?h=v5.19-rc4&id=9e629c17aa8d7a75b8c1d99ed42892cd8ba7cdc4
> > 
> > Regards,
> > CK
> > 
> 
> Hello CK,
> 
> I don't think it should be remove. After all, it is accepted and from
> [1], we can see it assgin output format always as RGB.
> +	dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> 
> After that, it also added patch of supporting changing output
> format[2].
> 
> We have support output as YUV422 now. I think it's ok to just add
> this.
> If we remove them and add them back, I think it is a little bit
> redundant. And I also can add a commit message like "output format
> YUV422 is not support for previous MediaTek SoCs. MT8195 supports
> output format as YUV422.."
> 
> What do you think?

If we have no information about mt8173 support YUV or not, we could
just treat it as not support YUV. I like to make things clean before
apply new feature. If you do not want to remove it, I would send a
patch to remove it.

Regards,
CK

> 
> [2]: 
> 
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/gpu/drm/mediatek/mtk_dpi.c?h=v5.19-rc4&id=be63f6e8601ff21139da93623754717e92cbd8db
> 
> BRs,
> Bo-Chen
> > > 
> > > BRs,
> > > Bo-Chen
> > > 
> > > > >  		if (dpi->conf->swap_input_support)
> > > > >  			mtk_dpi_config_swap_input(dpi, false);
> > > > >  		mtk_dpi_config_channel_swap(dpi,
> > > > > MTK_DPI_OUT_CHANNEL_SWAP_BGR);
> > > > > @@ -426,6 +454,7 @@ static void
> > > > > mtk_dpi_config_color_format(struct
> > > > > mtk_dpi *dpi,
> > > > >  		   (format ==
> > > > > MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL)) {
> > > > >  		mtk_dpi_config_yuv422_enable(dpi, true);
> > > > >  		mtk_dpi_config_csc_enable(dpi, true);
> > > > > +		mtk_dpi_matrix_sel(dpi, format);
> > > > >  		if (dpi->conf->swap_input_support)
> > > > >  			mtk_dpi_config_swap_input(dpi, true);
> > > > >  		else
> > > > > @@ -673,7 +702,10 @@ static int
> > > > > mtk_dpi_bridge_atomic_check(struct
> > > > > drm_bridge *bridge,
> > > > >  	dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
> > > > >  	dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> > > > >  	dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
> > > > > -	dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> > > > > +	if (out_bus_format == MEDIA_BUS_FMT_YUYV8_1X16)
> > > > > +		dpi->color_format =
> > > > > MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL;
> > > > > +	else
> > > > > +		dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> > > > >  
> > > > >  	return 0;
> > > > >  }
> > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > > > > b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > > > > index 3a02fabe1662..cca0dccb84a2 100644
> > > > > --- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > > > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > > > > @@ -217,4 +217,7 @@
> > > > >  
> > > > >  #define EDGE_SEL_EN			BIT(5)
> > > > >  #define H_FRE_2N			BIT(25)
> > > > > +
> > > > > +#define DPI_MATRIX_SET		0xB4
> > > > > +#define INT_MATRIX_SEL_MASK		GENMASK(4, 0)
> > > > >  #endif /* __MTK_DPI_REGS_H */
> > > > 
> > > > 
> > > 
> > > 
> > 
> > 
> 
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux