Re: [PATCH v14 0/4] Add lpass pin control support for audio on sc7280 based targets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 5 May 2022 20:33:20 +0530, Srinivasa Rao Mandadapu wrote:
> This patch set is to add lpass pin control support for Audio over I2S,
> wcd codec and digital mics.
> 
> Changes Since V13:
>     -- Remove redundant properties in lpass lpi pin control nodes.
>     -- Sort lpass lpi pin control nodes.
> Changes Since V12:
>     -- Split common lpass lpi pin control nodes to functionality specific nodes.
>     -- Move common pin control properties to corresponding default nodes.
> Changes Since V11:
>     -- Move CRD specific pinmux nodes to crd specific file.
> Changes Since V10:
>     -- Add lpass lpi pinmux and MI2S pinmux support for rev5+ boards.
>     -- Remove dependency patches link in the cover-letter as it is merged.
> Changes Since V9:
>     -- Remove redundant prefix in node name.
> Changes Since V8:
>     -- Modify label and node names to lpass specific.
>     -- Sort nodes as per node names and kind of nodes like pinctrl and device nodes.
> Changes Since V7:
>     -- Sort mi2s pincontrol nodes as per node name.
>     -- Fix typo errors.
> Changes Since V6:
>     -- Move amp_en node to corresponding consumer patch.
>     -- Update label and node names.
>     -- Remove redundant drive-strengths.
>     -- Remove herobrine crd specific mi2s configuration.
> Changes Since V5:
>     -- Remove redundant function property in amp_en node.
>     -- Move board specific properties of lpass pin control node to board specific file.
>     -- Remove redundant properties in pin control nodes.
>     -- Move wcd938x codec reset and CTIA/OMTP pin control patches to other series.
> Changes Since V4:
>     -- Add primary and secondary I2S pinmux nodes for herobrine specific targets.
> Changes Since V3:
>     -- Add pinctrl nodes for wcd codec reset and CTIA/OMTP headset selection.
> Changes Since V2:
>     -- Move lpass pin control node to main dtsi file.
>     -- Sort nodes alphabetically.
>     -- Remove redundant wcd reset gpio nodes.
>     -- Remove redundant input-enable field in dmic pin control nodes.
>     -- Update amp_en node.
>     -- Fix typo errors.
>     -- Modify node names.
>     -- Create patches on latest kernel.
> Changes Since V1:
>     -- Merge pinmux and pinconf properties in amp_en and wcd pin reset node.
>     -- Split common i2s pin control nodes to functionality specific nodes.
>     -- Move board specific properties to board specific dtsi file.
>     -- Update dmic pin control node name.
> 
> [...]

Applied, thanks!

[1/4] arm64: dts: qcom: sc7280: Add pinmux for I2S speaker and Headset
      commit: b9e3f65ecf85854c9717467c3cffaca194edd19f
[2/4] arm64: dts: qcom: sc7280: Add secondary MI2S pinmux specifications for CRD 3.0/3.1
      commit: 06c73a39c38b9321e638002450dcb22aa592ae99
[3/4] arm64: dts: qcom: sc7280: add lpass lpi pin controller node
      commit: 32d4541abe0f981cbcc45e142543d5811fd07692
[4/4] arm64: dts: qcom: sc7280-herobrine: Add lpi pinmux properties for CRD 3.0/3.1
      commit: a4c1fc8cff056461b9bd0e07e775f93073b4d527

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux