From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Hey all,
This series should rid us of dtbs_check errors for the RISC-V Canaan k210
based boards. To make keeping it that way a little easier, I changed the
Canaan devicetree Makefile so that it would build all of the devicetrees
in the directory if SOC_CANAAN.
I *DO NOT* have any Canaan hardware so I have not tested any of this in
action. Since I sent v1, I tried to buy some since it's cheap - but could
out of the limited stockists none seemed to want to deliver to Ireland :(
I based the series on next-20220617.
For the bindings, I am never sure about which of {unevaluated,additional}
Properties is correct to use, but the if statements in the binding didn't
work with additional so I used unevaluated...
@Mark, for your ASoC binding I was not sure about the properties that I
made depend on the compatible, but I looked in tree and was not able to
find other users to contradict what's in the Canaan devicetrees nor did
I get that much help from their docs.
@Serge, I dropped your R-b since I changed the enum.
@Rob, <N days ago>'s removal of ilitek,ili9341.txt is moved to ths series
since I was editing the dt-schema binding anyway.
Thanks,
Conor.
Changes since v1:
- I added a new dt node & compatible for the SRAM memory controller due
Damien's wish to preserve the inter-op with U-Boot.
- The dw-apb-ssi binding now uses the default rx/tx widths
- A new patch fixes bus {ranges,reg} warnings
- Rearranged the patches in a slightly more logical order
Conor Dooley (16):
dt-bindings: display: convert ilitek,ili9341.txt to dt-schema
dt-bindings: display: panel: allow ilitek,ili9341 in isolation
ASoC: dt-bindings: convert designware-i2s to dt-schema
spi: dt-bindings: dw-apb-ssi: update spi-{r,t}x-bus-width
dt-bindings: dma: add Canaan k210 to Synopsys DesignWare DMA
dt-bindings: timer: add Canaan k210 to Synopsys DesignWare timer
dt-bindings: memory-controllers: add canaan k210 sram controller
riscv: dts: canaan: fix the k210's memory node.
riscv: dts: canaan: add a specific compatible for k210's dma
riscv: dts: canaan: add a specific compatible for k210's timers
riscv: dts: canaan: fix mmc node names
riscv: dts: canaan: fix kd233 display spi frequency
riscv: dts: canaan: use custom compatible for k210 i2s
riscv: dts: canaan: remove spi-max-frequency from controllers
riscv: dts: canaan: fix bus {ranges,reg} warnings
riscv: dts: canaan: build all devicetress if SOC_CANAAN
.../bindings/display/ilitek,ili9341.txt | 27 ------
.../display/panel/ilitek,ili9341.yaml | 60 ++++++++----
.../bindings/dma/snps,dw-axi-dmac.yaml | 35 +++++--
.../memory-controllers/canaan,k210-sram.yaml | 53 +++++++++++
.../bindings/sound/designware-i2s.txt | 35 -------
.../bindings/sound/snps,designware-i2s.yaml | 93 +++++++++++++++++++
.../bindings/spi/snps,dw-apb-ssi.yaml | 6 --
.../bindings/timer/snps,dw-apb-timer.yaml | 28 ++++--
arch/riscv/boot/dts/canaan/Makefile | 10 +-
arch/riscv/boot/dts/canaan/canaan_kd233.dts | 4 +-
arch/riscv/boot/dts/canaan/k210.dtsi | 38 ++++----
.../riscv/boot/dts/canaan/sipeed_maix_bit.dts | 2 +-
.../boot/dts/canaan/sipeed_maix_dock.dts | 2 +-
arch/riscv/boot/dts/canaan/sipeed_maix_go.dts | 2 +-
.../boot/dts/canaan/sipeed_maixduino.dts | 2 +-
15 files changed, 269 insertions(+), 128 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9341.txt
create mode 100644 Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/designware-i2s.txt
create mode 100644 Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
--
2.36.1
