Re: [PATCH v3] arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 22.06.2022 15:26, Johan Hovold wrote:
> Add an initial devicetree for the Lenovo Thinkpad X13s with support for
> USB, backlight, keyboard, touchpad, touchscreen (to be verified), PMICs
> and remoteprocs.
> 
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
> 
> Changes since v2
>  - Amend commit message
>  - Drop unused include files (depends on updating sc8280xp-pmics.dtsi)
>  - Rename fixed-regulator nodes
>  - Shorten two comments
>  - Drop a couple of newline separators in the pinctrl nodes
> 
> Changs since v1:
>  - New patch
> 
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 389 ++++++++++++++++++
>  2 files changed, 390 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 2f416b84b71c..43053f1f6be9 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -91,6 +91,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd-r3.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-crd.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-lenovo-thinkpad-x13s.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-ganges-kirin.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-discovery.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-pioneer.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> new file mode 100644
> index 000000000000..9ffc4d69228e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -0,0 +1,389 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2022, Linaro Limited
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +
> +#include "sc8280xp.dtsi"
> +#include "sc8280xp-pmics.dtsi"
> +
> +/ {
> +	model = "Lenovo ThinkPad X13s";
> +	compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp";
> +
> +	backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pmc8280c_lpg 3 1000000>;
> +		enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
> +		power-supply = <&vreg_edp_bl>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
> +	};
> +
> +	vreg_edp_bl: regulator-edp-bl {
> +		compatible = "regulator-fixed";
> +
> +		regulator-name = "VBL9";
> +		regulator-min-microvolt = <3600000>;
> +		regulator-max-microvolt = <3600000>;
> +
> +		gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&edp_bl_reg_en>;
> +
> +		regulator-boot-on;
> +	};
> +
> +	vreg_misc_3p3: regulator-misc-3p3 {
> +		compatible = "regulator-fixed";
> +
> +		regulator-name = "VCC3B";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +
> +		gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&misc_3p3_reg_en>;
> +
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
> +	reserved-memory {
> +	};
You still haven't explained this weird node (I don't believe
the thing doesn't mind you poking at 'secure' regions, and even
if otherwise, it is unused for now).

Other than this:

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>

Konrad
> +};
> +
> +&apps_rsc {
> +	pmc8280-1-rpmh-regulators {
> +		compatible = "qcom,pm8350-rpmh-regulators";
> +		qcom,pmic-id = "b";
> +
> +		vdd-l3-l5-supply = <&vreg_s11b>;
> +
> +		vreg_s11b: smps11 {
> +			regulator-name = "vreg_s11b";
> +			regulator-min-microvolt = <1272000>;
> +			regulator-max-microvolt = <1272000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l3b: ldo3 {
> +			regulator-name = "vreg_l3b";
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1200000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +			regulator-boot-on;
> +		};
> +
> +		vreg_l4b: ldo4 {
> +			regulator-name = "vreg_l4b";
> +			regulator-min-microvolt = <912000>;
> +			regulator-max-microvolt = <912000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +		};
> +
> +		vreg_l6b: ldo6 {
> +			regulator-name = "vreg_l6b";
> +			regulator-min-microvolt = <880000>;
> +			regulator-max-microvolt = <880000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +			regulator-boot-on;
> +			regulator-always-on;	// FIXME: VDD_A_EDP_0_0P9
> +		};
> +	};
> +
> +	pmc8280c-rpmh-regulators {
> +		compatible = "qcom,pm8350c-rpmh-regulators";
> +		qcom,pmic-id = "c";
> +
> +		vreg_l1c: ldo1 {
> +			regulator-name = "vreg_l1c";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +		};
> +
> +		vreg_l12c: ldo12 {
> +			regulator-name = "vreg_l12c";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +		};
> +
> +		vreg_l13c: ldo13 {
> +			regulator-name = "vreg_l13c";
> +			regulator-min-microvolt = <3072000>;
> +			regulator-max-microvolt = <3072000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +		};
> +	};
> +
> +	pmc8280-2-rpmh-regulators {
> +		compatible = "qcom,pm8350-rpmh-regulators";
> +		qcom,pmic-id = "d";
> +
> +		vdd-l1-l4-supply = <&vreg_s11b>;
> +
> +		vreg_l3d: ldo3 {
> +			regulator-name = "vreg_l3d";
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1200000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +		};
> +
> +		vreg_l4d: ldo4 {
> +			regulator-name = "vreg_l4d";
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1200000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +		};
> +
> +		vreg_l7d: ldo7 {
> +			regulator-name = "vreg_l7d";
> +			regulator-min-microvolt = <3072000>;
> +			regulator-max-microvolt = <3072000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +		};
> +
> +		vreg_l9d: ldo9 {
> +			regulator-name = "vreg_l9d";
> +			regulator-min-microvolt = <912000>;
> +			regulator-max-microvolt = <912000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +		};
> +	};
> +};
> +
> +&pmc8280c_lpg {
> +	status = "okay";
> +};
> +
> +&pmk8280_pon_pwrkey {
> +	status = "okay";
> +};
> +
> +&qup0 {
> +	status = "okay";
> +};
> +
> +&qup0_i2c4 {
> +	clock-frequency = <400000>;
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&qup0_i2c4_default>, <&ts0_default>;
> +
> +	status = "okay";
> +
> +	/* FIXME: verify */
> +	touchscreen@10 {
> +		compatible = "hid-over-i2c";
> +		reg = <0x10>;
> +		hid-descr-addr = <0x1>;
> +		interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
> +		vdd-supply = <&vreg_misc_3p3>;
> +	};
> +};
> +
> +&qup1 {
> +	status = "okay";
> +};
> +
> +&qup2 {
> +	status = "okay";
> +};
> +
> +&qup2_i2c5 {
> +	clock-frequency = <400000>;
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&qup2_i2c5_default>, <&kybd_default>, <&tpad_default>;
> +
> +	status = "okay";
> +
> +	touchpad@2c {
> +		compatible = "hid-over-i2c";
> +		reg = <0x2c>;
> +		hid-descr-addr = <0x20>;
> +		interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
> +		vdd-supply = <&vreg_misc_3p3>;
> +	};
> +
> +	keyboard@68 {
> +		compatible = "hid-over-i2c";
> +		reg = <0x68>;
> +		hid-descr-addr = <0x1>;
> +		interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
> +		vdd-supply = <&vreg_misc_3p3>;
> +	};
> +};
> +
> +&remoteproc_adsp {
> +	firmware-name = "qcom/sc8280xp/qcadsp8280.mbn";
> +
> +	status = "okay";
> +};
> +
> +&remoteproc_nsp0 {
> +	firmware-name = "qcom/sc8280xp/qccdsp8280.mbn";
> +
> +	status = "okay";
> +};
> +
> +&usb_0 {
> +	status = "okay";
> +};
> +
> +&usb_0_dwc3 {
> +	/* TODO: Define USB-C connector properly */
> +	dr_mode = "host";
> +};
> +
> +&usb_0_hsphy {
> +	vdda-pll-supply = <&vreg_l9d>;
> +	vdda18-supply = <&vreg_l1c>;
> +	vdda33-supply = <&vreg_l7d>;
> +
> +	status = "okay";
> +};
> +
> +&usb_0_qmpphy {
> +	vdda-phy-supply = <&vreg_l9d>;
> +	vdda-pll-supply = <&vreg_l4d>;
> +
> +	status = "okay";
> +};
> +
> +&usb_1 {
> +	status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> +	/* TODO: Define USB-C connector properly */
> +	dr_mode = "host";
> +};
> +
> +&usb_1_hsphy {
> +	vdda-pll-supply = <&vreg_l4b>;
> +	vdda18-supply = <&vreg_l1c>;
> +	vdda33-supply = <&vreg_l13c>;
> +
> +	status = "okay";
> +};
> +
> +&usb_1_qmpphy {
> +	vdda-phy-supply = <&vreg_l4b>;
> +	vdda-pll-supply = <&vreg_l3b>;
> +
> +	status = "okay";
> +};
> +
> +&xo_board_clk {
> +	clock-frequency = <38400000>;
> +};
> +
> +/* PINCTRL */
> +
> +&pmc8280_1_gpios {
> +	edp_bl_en: edp-bl-en-state {
> +		pins = "gpio8";
> +		function = "normal";
> +	};
> +
> +	edp_bl_reg_en: edp-bl-reg-en-state {
> +		pins = "gpio9";
> +		function = "normal";
> +	};
> +
> +	misc_3p3_reg_en: misc-3p3-reg-en-state {
> +		pins = "gpio1";
> +		function = "normal";
> +	};
> +};
> +
> +&pmc8280c_gpios {
> +	edp_bl_pwm: edp-bl-pwm-state {
> +		pins = "gpio8";
> +		function = "func1";
> +	};
> +};
> +
> +&tlmm {
> +	gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
> +
> +	kybd_default: kybd-default-state {
> +		disable {
> +			pins = "gpio102";
> +			function = "gpio";
> +			output-low;
> +		};
> +
> +		int-n {
> +			pins = "gpio104";
> +			function = "gpio";
> +			bias-disable;
> +		};
> +
> +		reset {
> +			pins = "gpio105";
> +			function = "gpio";
> +			bias-disable;
> +		};
> +	};
> +
> +	qup0_i2c4_default: qup0-i2c4-default-state {
> +		pins = "gpio171", "gpio172";
> +		function = "qup4";
> +		bias-disable;
> +		drive-strength = <16>;
> +	};
> +
> +	qup2_i2c5_default: qup2-i2c5-default-state {
> +		pins = "gpio81", "gpio82";
> +		function = "qup21";
> +		bias-disable;
> +		drive-strength = <16>;
> +	};
> +
> +	tpad_default: tpad-default-state {
> +		int-n {
> +			pins = "gpio182";
> +			function = "gpio";
> +			bias-disable;
> +		};
> +	};
> +
> +	ts0_default: ts0-default-state {
> +		int-n {
> +			pins = "gpio175";
> +			function = "gpio";
> +			bias-pull-up;
> +		};
> +
> +		reset-n {
> +			pins = "gpio99";
> +			function = "gpio";
> +			output-high;
> +			drive-strength = <16>;
> +		};
> +	};
> +};
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux