Re: [PATCH 1/2] dt-bindings: i2c: Document RZ/V2M I2C controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27/06/2022 09:17, Phil Edworthy wrote:
> Hi Krzysztof,
> 
> Thanks for you review.
> 
> On 25 June 2022 21:43 Krzysztof Kozlowski wrote:
>> On 24/06/2022 12:17, Phil Edworthy wrote:
>>> Document Renesas RZ/V2M (r9a09g011) I2C controller bindings.
>>>
>>> Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
>>> Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
>>> ---
>>>  .../bindings/i2c/renesas,rzv2m.yaml           | 76 +++++++++++++++++++
>>>  1 file changed, 76 insertions(+)
>>>  create mode 100644
>> Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
>> b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
>>> new file mode 100644
>>> index 000000000000..9049461ad2f4
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
>>> @@ -0,0 +1,76 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/i2c/renesas,rzv2m.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Renesas RZ/V2M I2C Bus Interface
>>> +
>>> +maintainers:
>>> +  - Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
>>> +
>>> +allOf:
>>> +  - $ref: /schemas/i2c/i2c-controller.yaml#
>>> +
>>> +properties:
>>> +  compatible:
>>> +    items:
>>> +      - enum:
>>> +          - renesas,i2c-r9a09g011  # RZ/V2M
>>> +      - const: renesas,rzv2m-i2c
>>> +
>>> +  reg:
>>> +    maxItems: 1
>>> +
>>> +  interrupts:
>>> +    items:
>>> +      - description: Data transmission/reception interrupt
>>> +      - description: Status interrupt
>>> +
>>> +  interrupt-names:
>>> +    items:
>>> +      - const: tia
>>> +      - const: tis
>>> +
>>> +  clock-frequency:
>>> +    description:
>>> +      Desired I2C bus clock frequency in Hz. The absence of this
>> property
>>> +      indicates the default frequency 100 kHz.
>>
>> Instead of last sentence, just add "default: 100000".
> Right, I'll also and an enum for this as the HW can only support 100
> or 400kHz.

Sure, sounds good. Thank you.

Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux