The bias_combo getter/setter is already able to handle advanced drive
configuration, include drive for I2C related pins. For consistency
should drop pull-up-adv and pull-down-adv properties from the binding.
With those properties removed, there's no longer any use for the adv_pull
callbacks, so drop them.
Signed-off-by: Guodong Liu <guodong.liu@xxxxxxxxxxxx>
---
drivers/pinctrl/mediatek/pinctrl-mt8192.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8192.c b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
index a920098d7350..7593d103ddd6 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8192.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
@@ -1466,8 +1466,6 @@ static const struct mtk_pin_soc mt8192_data = {
.bias_get_combo = mtk_pinconf_bias_get_combo,
.drive_set = mtk_pinconf_drive_set_rev1,
.drive_get = mtk_pinconf_drive_get_rev1,
- .adv_pull_get = mtk_pinconf_adv_pull_get,
- .adv_pull_set = mtk_pinconf_adv_pull_set,
.adv_drive_get = mtk_pinconf_adv_drive_get_raw,
.adv_drive_set = mtk_pinconf_adv_drive_set_raw,
};
--
2.25.5
