[PATCH 05/11] dt-bindings: display/msm: move qcom,qcm2290-mdss schema to mdss.yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Move schema for qcom,qcm2290-mdss from dpu-qcm2290.yaml to mdss.yaml so
that the dpu file describes only the DPU schema.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 .../bindings/display/msm/dpu-qcm2290.yaml     | 140 +++++-------------
 .../devicetree/bindings/display/msm/mdss.yaml |  25 ++++
 2 files changed, 58 insertions(+), 107 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
index 734d14de966d..8027319b1aad 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
@@ -10,146 +10,72 @@ maintainers:
   - Loic Poulain <loic.poulain@xxxxxxxxxx>
 
 description: |
-  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
-  sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
-  and DPU are mentioned for QCM2290 target.
+  Device tree bindings for the DPU display controller for QCM2290 target.
 
 properties:
   compatible:
     items:
-      - const: qcom,qcm2290-mdss
+      - const: qcom,qcm2290-dpu
 
   reg:
-    maxItems: 1
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
 
   reg-names:
-    const: mdss
-
-  power-domains:
-    maxItems: 1
+    items:
+      - const: mdp
+      - const: vbif
 
   clocks:
     items:
-      - description: Display AHB clock from gcc
-      - description: Display AXI clock
-      - description: Display core clock
+      - description: Display AXI clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock from dispcc
+      - description: Display lut clock from dispcc
+      - description: Display vsync clock from dispcc
 
   clock-names:
     items:
-      - const: iface
       - const: bus
+      - const: iface
       - const: core
+      - const: lut
+      - const: vsync
 
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-
-  "#address-cells": true
-
-  "#size-cells": true
-
-  "#interrupt-cells":
-    const: 1
-
-  iommus:
-    items:
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
-
-  ranges: true
-
-  interconnects:
-    items:
-      - description: Interconnect path specifying the port ids for data bus
-
-  interconnect-names:
-    const: mdp0-mem
+  power-domains:
+    maxItems: 1
 
-  resets:
-    items:
-      - description: MDSS_CORE reset
+  operating-points-v2: true
 
-patternProperties:
-  "^display-controller@[0-9a-f]+$":
-    type: object
-    description: Node containing the properties of DPU.
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Contains the list of output ports from DPU device. These ports
+      connect to interfaces that are external to the DPU hardware,
+      such as DSI. Each output port contains an endpoint that
+      describes how it is connected to an external interface.
 
     properties:
-      compatible:
-        items:
-          - const: qcom,qcm2290-dpu
-
-      reg:
-        items:
-          - description: Address offset and size for mdp register set
-          - description: Address offset and size for vbif register set
-
-      reg-names:
-        items:
-          - const: mdp
-          - const: vbif
-
-      clocks:
-        items:
-          - description: Display AXI clock from gcc
-          - description: Display AHB clock from dispcc
-          - description: Display core clock from dispcc
-          - description: Display lut clock from dispcc
-          - description: Display vsync clock from dispcc
-
-      clock-names:
-        items:
-          - const: bus
-          - const: iface
-          - const: core
-          - const: lut
-          - const: vsync
-
-      interrupts:
-        maxItems: 1
-
-      power-domains:
-        maxItems: 1
-
-      operating-points-v2: true
-
-      ports:
-        $ref: /schemas/graph.yaml#/properties/ports
-        description: |
-          Contains the list of output ports from DPU device. These ports
-          connect to interfaces that are external to the DPU hardware,
-          such as DSI. Each output port contains an endpoint that
-          describes how it is connected to an external interface.
-
-        properties:
-          port@0:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF1 (DSI1)
-
-        required:
-          - port@0
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DPU_INTF1 (DSI1)
 
     required:
-      - compatible
-      - reg
-      - reg-names
-      - clocks
-      - interrupts
-      - power-domains
-      - operating-points-v2
-      - ports
+      - port@0
 
 required:
   - compatible
   - reg
   - reg-names
-  - power-domains
   - clocks
   - interrupts
-  - interrupt-controller
-  - iommus
-  - ranges
+  - power-domains
+  - operating-points-v2
+  - ports
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/display/msm/mdss.yaml b/Documentation/devicetree/bindings/display/msm/mdss.yaml
index 6221356b3003..c84e0c984e27 100644
--- a/Documentation/devicetree/bindings/display/msm/mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/mdss.yaml
@@ -18,6 +18,7 @@ description: |
 properties:
   compatible:
     enum:
+      - qcom,qcm2290-mdss
       - qcom,sc7180-mdss
       - qcom,sc7280-mdss
       - qcom,sdm845-mdss
@@ -141,6 +142,29 @@ allOf:
             - const: vsync
             - const: core
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-mdss
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Display AHB clock from gcc
+            - description: Display AXI clock
+            - description: Display core clock
+
+        clock-names:
+          items:
+            - const: iface
+            - const: bus
+            - const: core
+
+        iommus:
+          minItems: 2
+
   - if:
       properties:
         compatible:
@@ -215,6 +239,7 @@ patternProperties:
     properties:
       compatible:
         enum:
+          - qcom,qcm2290-dpu
           - qcom,sc7280-dpu
 
   "^displayport-controller@(0|[1-9a-f][0-9a-f]*)$":
-- 
2.35.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux