The Data Ready Output Pin is either hard wired to work as high impedance or push-pull. Make it configurable. Signed-off-by: Marcus Folkesson <marcus.folkesson@xxxxxxxxx> --- Notes: v2: - Removed default value and changed description (Krzysztof Kozlo) .../devicetree/bindings/iio/adc/microchip,mcp3911.yaml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index 95ab285f4eba..57a16380f864 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -36,6 +36,13 @@ properties: description: IRQ line of the ADC maxItems: 1 + microchip,data-ready-hiz: + description: + Data Ready Pin Inactive State Control + true = The DR pin state is high-impedance when data are NOT ready + false = The DR pin state is a logic high when data are NOT ready + type: boolean + microchip,device-addr: description: Device address when multiple MCP3911 chips are present on the same SPI bus. $ref: /schemas/types.yaml#/definitions/uint32 -- 2.36.1