From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx> Add bindings for the ADIN1110/2111 MAC-PHY/SWITCH. Signed-off-by: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx> --- .../devicetree/bindings/net/adi,adin1110.yaml | 127 ++++++++++++++++++ 1 file changed, 127 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/adi,adin1110.yaml diff --git a/Documentation/devicetree/bindings/net/adi,adin1110.yaml b/Documentation/devicetree/bindings/net/adi,adin1110.yaml new file mode 100644 index 000000000000..0ac18dd62e5a --- /dev/null +++ b/Documentation/devicetree/bindings/net/adi,adin1110.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/net/adi,adin1110.yaml#"; +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; + +title: ADI ADIN1110 MAC-PHY + +allOf: + - $ref: ethernet-controller.yaml# + - $ref: spi-controller.yaml# + +maintainers: + - Alexandru Tachici <alexandru.tachici@xxxxxxxxxx> + +description: | + The ADIN1110 is a low power single port 10BASE-T1L MAC- + PHY designed for industrial Ethernet applications. It integrates + an Ethernet PHY core with a MAC and all the associated analog + circuitry, input and output clock buffering. + + The ADIN2111 is a low power, low complexity, two-Ethernet ports + switch with integrated 10BASE-T1L PHYs and one serial peripheral + interface (SPI) port. The device is designed for industrial Ethernet + applications using low power constrained nodes and is compliant + with the IEEE 802.3cg-2019 Ethernet standard for long reach + 10 Mbps single pair Ethernet (SPE). + + The device has a 4-wire SPI interface for communication + between the MAC and host processor. + +properties: + compatible: + enum: + - adi,adin1110 + - adi,adin2111 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + maxItems: 1 + + adi,spi-crc: + description: | + Enable CRC8 checks on SPI read/writes. + type: boolean + + interrupts: + maxItems: 1 + +patternProperties: + "^phy@[0-1]$": + description: | + ADIN1100 PHY that is present on the same chip as the MAC. + type: object + + properties: + reg: + items: + maximum: 1 + + allOf: + - if: + properties: + compatible: + contains: + const: adi,adin1110 + then: + properties: + compatible: + const: ethernet-phy-id0283.bc91 + else: + properties: + compatible: + const: ethernet-phy-id0283.bca1 + + required: + - compatible + - reg + +required: + - compatible + - reg + - interrupts + - phy@0 + +unevaluatedProperties: false + +examples: + - | + spi0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet@0 { + compatible = "adi,adin2111"; + reg = <0>; + spi-max-frequency = <24500000>; + + adi,spi-crc; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&gpio>; + interrupts = <25 2>; + + mac-address = [ ca 2f b7 10 23 63 ]; + + phy@0 { + #phy-cells = <0>; + compatible = "ethernet-phy-id0283.bca1"; + reg = <0>; + }; + + phy@1 { + #phy-cells = <0>; + compatible = "ethernet-phy-id0283.bca1"; + reg = <1>; + }; + }; + }; -- 2.25.1
