gpio-keys children do not use unit addresses. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- See: https://lore.kernel.org/all/20220616005224.18391-1-krzysztof.kozlowski@xxxxxxxxxx/ --- arch/mips/boot/dts/img/pistachio_marduk.dts | 4 +-- arch/mips/boot/dts/ingenic/gcw0.dts | 31 +++++++++---------- arch/mips/boot/dts/ingenic/rs90.dts | 18 +++++------ arch/mips/boot/dts/pic32/pic32mzda_sk.dts | 9 ++---- .../boot/dts/qca/ar9132_tl_wr1043nd_v1.dts | 6 ++-- arch/mips/boot/dts/qca/ar9331_dpt_module.dts | 4 +-- .../mips/boot/dts/qca/ar9331_dragino_ms14.dts | 6 ++-- arch/mips/boot/dts/qca/ar9331_omega.dts | 4 +-- .../qca/ar9331_openembed_som9331_board.dts | 4 +-- arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts | 8 ++--- 10 files changed, 37 insertions(+), 57 deletions(-) diff --git a/arch/mips/boot/dts/img/pistachio_marduk.dts b/arch/mips/boot/dts/img/pistachio_marduk.dts index a8708783f04b..a8da2f992b1a 100644 --- a/arch/mips/boot/dts/img/pistachio_marduk.dts +++ b/arch/mips/boot/dts/img/pistachio_marduk.dts @@ -59,12 +59,12 @@ led-1 { keys { compatible = "gpio-keys"; - button@1 { + button-1 { label = "Button 1"; linux,code = <0x101>; /* BTN_1 */ gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; }; - button@2 { + button-2 { label = "Button 2"; linux,code = <0x102>; /* BTN_2 */ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts b/arch/mips/boot/dts/ingenic/gcw0.dts index 4abb0318416c..5d33f26fd28c 100644 --- a/arch/mips/boot/dts/ingenic/gcw0.dts +++ b/arch/mips/boot/dts/ingenic/gcw0.dts @@ -130,89 +130,86 @@ backlight: backlight { gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - button@0 { + button-0 { label = "D-pad up"; linux,code = <KEY_UP>; linux,can-disable; gpios = <&gpe 21 GPIO_ACTIVE_LOW>; }; - button@1 { + button-1 { label = "D-pad down"; linux,code = <KEY_DOWN>; linux,can-disable; gpios = <&gpe 25 GPIO_ACTIVE_LOW>; }; - button@2 { + button-2 { label = "D-pad left"; linux,code = <KEY_LEFT>; linux,can-disable; gpios = <&gpe 23 GPIO_ACTIVE_LOW>; }; - button@3 { + button-3 { label = "D-pad right"; linux,code = <KEY_RIGHT>; linux,can-disable; gpios = <&gpe 24 GPIO_ACTIVE_LOW>; }; - button@4 { + button-4 { label = "Button A"; linux,code = <KEY_LEFTCTRL>; linux,can-disable; gpios = <&gpe 29 GPIO_ACTIVE_LOW>; }; - button@5 { + button-5 { label = "Button B"; linux,code = <KEY_LEFTALT>; linux,can-disable; gpios = <&gpe 20 GPIO_ACTIVE_LOW>; }; - button@6 { + button-6 { label = "Button Y"; linux,code = <KEY_SPACE>; linux,can-disable; gpios = <&gpe 27 GPIO_ACTIVE_LOW>; }; - button@7 { + button-7 { label = "Button X"; linux,code = <KEY_LEFTSHIFT>; linux,can-disable; gpios = <&gpe 28 GPIO_ACTIVE_LOW>; }; - button@8 { + button-8 { label = "Left shoulder button"; linux,code = <KEY_TAB>; linux,can-disable; gpios = <&gpb 20 GPIO_ACTIVE_LOW>; }; - button@9 { + button-9 { label = "Right shoulder button"; linux,code = <KEY_BACKSPACE>; linux,can-disable; gpios = <&gpe 26 GPIO_ACTIVE_LOW>; }; - button@10 { + button-10 { label = "Start button"; linux,code = <KEY_ENTER>; linux,can-disable; gpios = <&gpb 21 GPIO_ACTIVE_LOW>; }; - button@11 { + button-11 { label = "Select button"; linux,code = <KEY_ESC>; linux,can-disable; @@ -223,7 +220,7 @@ button@11 { gpios = <&gpd 18 GPIO_ACTIVE_HIGH>; }; - button@12 { + button-12 { label = "Power slider"; linux,code = <KEY_POWER>; linux,can-disable; @@ -231,7 +228,7 @@ button@12 { wakeup-source; }; - button@13 { + button-13 { label = "Power hold"; linux,code = <KEY_PAUSE>; linux,can-disable; diff --git a/arch/mips/boot/dts/ingenic/rs90.dts b/arch/mips/boot/dts/ingenic/rs90.dts index 74fee7f01352..e8df70dd42bf 100644 --- a/arch/mips/boot/dts/ingenic/rs90.dts +++ b/arch/mips/boot/dts/ingenic/rs90.dts @@ -52,53 +52,51 @@ backlight: backlight { keys@0 { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - key@0 { + key-0 { label = "D-pad up"; linux,code = <KEY_UP>; gpios = <&gpc 10 GPIO_ACTIVE_LOW>; }; - key@1 { + key-1 { label = "D-pad down"; linux,code = <KEY_DOWN>; gpios = <&gpc 11 GPIO_ACTIVE_LOW>; }; - key@2 { + key-2 { label = "D-pad left"; linux,code = <KEY_LEFT>; gpios = <&gpb 31 GPIO_ACTIVE_LOW>; }; - key@3 { + key-3 { label = "D-pad right"; linux,code = <KEY_RIGHT>; gpios = <&gpd 21 GPIO_ACTIVE_LOW>; }; - key@4 { + key-4 { label = "Button A"; linux,code = <KEY_LEFTCTRL>; gpios = <&gpc 31 GPIO_ACTIVE_LOW>; }; - key@5 { + key-5 { label = "Button B"; linux,code = <KEY_LEFTALT>; gpios = <&gpc 30 GPIO_ACTIVE_LOW>; }; - key@6 { + key-6 { label = "Right shoulder button"; linux,code = <KEY_BACKSPACE>; gpios = <&gpc 12 GPIO_ACTIVE_LOW>; debounce-interval = <10>; }; - key@7 { + key-7 { label = "Start button"; linux,code = <KEY_ENTER>; gpios = <&gpd 17 GPIO_ACTIVE_LOW>; diff --git a/arch/mips/boot/dts/pic32/pic32mzda_sk.dts b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts index d7fa5d55dbf3..ab70637bbec5 100644 --- a/arch/mips/boot/dts/pic32/pic32mzda_sk.dts +++ b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts @@ -52,22 +52,19 @@ keys0 { pinctrl-0 = <&user_buttons_s0>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - - button@sw1 { + button-1 { label = "ESC"; linux,code = <1>; gpios = <&gpio1 12 0>; }; - button@sw2 { + button-2 { label = "Home"; linux,code = <102>; gpios = <&gpio1 13 0>; }; - button@sw3 { + button-3 { label = "Menu"; linux,code = <139>; gpios = <&gpio1 14 0>; diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts index 7fccf6357225..f3dff4009ab5 100644 --- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts +++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts @@ -23,17 +23,15 @@ extosc: ref { gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; - button@1 { + button-1 { label = "qss"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio 7 GPIO_ACTIVE_LOW>; diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts index 7695d326df11..c857cd22f7db 100644 --- a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts +++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts @@ -33,10 +33,8 @@ led-0 { gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; diff --git a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts index d38aa73f1a2e..40e4c5da0e65 100644 --- a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts +++ b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts @@ -49,16 +49,14 @@ system { gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "jumpstart"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; - button@1 { + button-1 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; diff --git a/arch/mips/boot/dts/qca/ar9331_omega.dts b/arch/mips/boot/dts/qca/ar9331_omega.dts index 11778abacf66..ed184d861d5f 100644 --- a/arch/mips/boot/dts/qca/ar9331_omega.dts +++ b/arch/mips/boot/dts/qca/ar9331_omega.dts @@ -31,10 +31,8 @@ system { gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; diff --git a/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts b/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts index e6622f8e8c2b..dc65ebd60bbc 100644 --- a/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts +++ b/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts @@ -33,10 +33,8 @@ led-0 { gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; diff --git a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts index c8290d36cfbe..5f424c2cd781 100644 --- a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts +++ b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts @@ -49,22 +49,20 @@ led3g { gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; }; - button@1 { + button-1 { label = "sw1"; linux,code = <BTN_0>; gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; }; - button@2 { + button-2 { label = "sw2"; linux,code = <BTN_1>; gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; -- 2.34.1
