Hi Guodong, thanks for the patch. Please see comments below. On Fri, Jun 24, 2022 at 09:36:58PM +0800, Guodong Liu wrote: > 1. I2C pins's resistance value can be controlled by rsel register. > This patch provides rsel (resistance selection) setting on mt8192. > 2. Also add the missing pull type array for mt8192 to document the > pull type of each pin and prevent invalid pull type settings. > > Signed-off-by: Guodong Liu <guodong.liu@xxxxxxxxxxxx> > --- > drivers/pinctrl/mediatek/pinctrl-mt8192.c | 136 ++++++++++++++++++++++ > 1 file changed, 136 insertions(+) > > diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8192.c b/drivers/pinctrl/mediatek/pinctrl-mt8192.c > index efabeb422aea..ffb0b04f0e3c 100644 > --- a/drivers/pinctrl/mediatek/pinctrl-mt8192.c > +++ b/drivers/pinctrl/mediatek/pinctrl-mt8192.c <snip> > + MTK_PULL_PU_PD_TYPE,/*100* MTK_PULL_PU_PD_TYPE,/*101*/ > + MTK_PULL_PU_PD_TYPE,/*102* MTK_PULL_PU_PD_TYPE,/*103*/ > + MTK_PULL_PU_PD_TYPE,/*104* MTK_PULL_PU_PD_TYPE,/*105*/ > + MTK_PULL_PU_PD_TYPE,/*106* MTK_PULL_PU_PD_TYPE,/*107*/ > + MTK_PULL_PU_PD_TYPE,/*108* MTK_PULL_PU_PD_TYPE,/*109*/ > + MTK_PULL_PU_PD_TYPE,/*110* MTK_PULL_PU_PD_TYPE,/*111*/ > + MTK_PULL_PU_PD_TYPE,/*112* MTK_PULL_PU_PD_TYPE,/*113*/ > + MTK_PULL_PU_PD_TYPE,/*114* MTK_PULL_PU_PD_TYPE,/*115*/ > + MTK_PULL_PU_PD_TYPE,/*116* MTK_PULL_PU_PD_TYPE,/*117*/ The comments on pins 100 - 116 are missing the closing '/', effectively commenting out pins 101 - 117 and leading to errors. Please fix this. Other than that, Reviewed-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx> Tested-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx> Thanks, Nícolas
