On 6/23/22 11:47, Joel Stanley wrote:
The AST2600A3 EVB has the following I2C devices: - ADT7490 at 0x2e - EEPROM at 0xa0 - LM75 at 0x9a The bus these devices appear on can be configured by jumpers. The device tree is configured with the buses given by the default jumper settings. Signed-off-by: Joel Stanley <joel@xxxxxxxxx>
Reviewed-by: Cédric Le Goater <clg@xxxxxxxx> Thanks, C.
--- arch/arm/boot/dts/aspeed-ast2600-evb.dts | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index 5a6063bd4508..9da70b873ab6 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -207,11 +207,6 @@ &uart5 {&i2c0 {status = "okay"; - - temp@2e { - compatible = "adi,adt7490"; - reg = <0x2e>; - }; };&i2c1 {@@ -240,10 +235,26 @@ &i2c6 {&i2c7 {status = "okay"; + + temp@2e { + compatible = "adi,adt7490"; + reg = <0x2e>; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pagesize = <16>; + }; };&i2c8 {status = "okay"; + + lm75@4d { + compatible = "national,lm75"; + reg = <0x4d>; + }; };&i2c9 {
