As we are converting this platform to use DT clock bindings, add clocks
and clock-names properties to the GCC device tree node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 72b099ed4543..9ea279f04a78 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -2,6 +2,7 @@
/dts-v1/;
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/clock/qcom,lcc-msm8960.h>
#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
@@ -815,6 +816,10 @@ gcc: clock-controller@900000 {
#clock-cells = <1>;
#power-domain-cells = <1>;
#reset-cells = <1>;
+ clocks = <&cxo_board>,
+ <&pxo_board>,
+ <&lcc PLL4>;
+ clock-names = "cxo", "pxo", "pll4";
tsens: thermal-sensor {
compatible = "qcom,msm8960-tsens";
--
2.35.1
