[PATCH 05/15] clk: qcom: lcc-msm8960: use macros to implement mi2s clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Split and extend existing CLK_AIF_OSR_DIV macro to implement mi2s
clocks. This simplifies the driver and removes extra code duplication.

The clock mi2s_div_clk used .enable_reg/.enable_bit, however these
fields are not used with by the clk_regmap_div_ops, thus they are
silently dropped. Clock enablement is handled in the mi2s_bit_div_clk
clock.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/clk/qcom/lcc-msm8960.c | 142 +++++++--------------------------
 1 file changed, 27 insertions(+), 115 deletions(-)

diff --git a/drivers/clk/qcom/lcc-msm8960.c b/drivers/clk/qcom/lcc-msm8960.c
index 84817cf2b6bd..99a3d2d486b4 100644
--- a/drivers/clk/qcom/lcc-msm8960.c
+++ b/drivers/clk/qcom/lcc-msm8960.c
@@ -86,112 +86,7 @@ static struct freq_tbl clk_tbl_aif_osr_393[] = {
 	{ }
 };
 
-static struct clk_rcg mi2s_osr_src = {
-	.ns_reg = 0x48,
-	.md_reg = 0x4c,
-	.mn = {
-		.mnctr_en_bit = 8,
-		.mnctr_reset_bit = 7,
-		.mnctr_mode_shift = 5,
-		.n_val_shift = 24,
-		.m_val_shift = 8,
-		.width = 8,
-	},
-	.p = {
-		.pre_div_shift = 3,
-		.pre_div_width = 2,
-	},
-	.s = {
-		.src_sel_shift = 0,
-		.parent_map = lcc_pxo_pll4_map,
-	},
-	.freq_tbl = clk_tbl_aif_osr_393,
-	.clkr = {
-		.enable_reg = 0x48,
-		.enable_mask = BIT(9),
-		.hw.init = &(struct clk_init_data){
-			.name = "mi2s_osr_src",
-			.parent_names = lcc_pxo_pll4,
-			.num_parents = 2,
-			.ops = &clk_rcg_ops,
-			.flags = CLK_SET_RATE_GATE,
-		},
-	},
-};
-
-static const char * const lcc_mi2s_parents[] = {
-	"mi2s_osr_src",
-};
-
-static struct clk_branch mi2s_osr_clk = {
-	.halt_reg = 0x50,
-	.halt_bit = 1,
-	.halt_check = BRANCH_HALT_ENABLE,
-	.clkr = {
-		.enable_reg = 0x48,
-		.enable_mask = BIT(17),
-		.hw.init = &(struct clk_init_data){
-			.name = "mi2s_osr_clk",
-			.parent_names = lcc_mi2s_parents,
-			.num_parents = 1,
-			.ops = &clk_branch_ops,
-			.flags = CLK_SET_RATE_PARENT,
-		},
-	},
-};
-
-static struct clk_regmap_div mi2s_div_clk = {
-	.reg = 0x48,
-	.shift = 10,
-	.width = 4,
-	.clkr = {
-		.enable_reg = 0x48,
-		.enable_mask = BIT(15),
-		.hw.init = &(struct clk_init_data){
-			.name = "mi2s_div_clk",
-			.parent_names = lcc_mi2s_parents,
-			.num_parents = 1,
-			.ops = &clk_regmap_div_ops,
-		},
-	},
-};
-
-static struct clk_branch mi2s_bit_div_clk = {
-	.halt_reg = 0x50,
-	.halt_bit = 0,
-	.halt_check = BRANCH_HALT_ENABLE,
-	.clkr = {
-		.enable_reg = 0x48,
-		.enable_mask = BIT(15),
-		.hw.init = &(struct clk_init_data){
-			.name = "mi2s_bit_div_clk",
-			.parent_names = (const char *[]){ "mi2s_div_clk" },
-			.num_parents = 1,
-			.ops = &clk_branch_ops,
-			.flags = CLK_SET_RATE_PARENT,
-		},
-	},
-};
-
-static struct clk_regmap_mux mi2s_bit_clk = {
-	.reg = 0x48,
-	.shift = 14,
-	.width = 1,
-	.clkr = {
-		.hw.init = &(struct clk_init_data){
-			.name = "mi2s_bit_clk",
-			.parent_names = (const char *[]){
-				"mi2s_bit_div_clk",
-				"mi2s_codec_clk",
-			},
-			.num_parents = 2,
-			.ops = &clk_regmap_mux_closest_ops,
-			.flags = CLK_SET_RATE_PARENT,
-		},
-	},
-};
-
-#define CLK_AIF_OSR_DIV(prefix, _ns, _md, hr)			\
+#define CLK_AIF_OSR_SRC(prefix, _ns, _md)			\
 static struct clk_rcg prefix##_osr_src = {			\
 	.ns_reg = _ns,						\
 	.md_reg = _md,						\
@@ -228,14 +123,15 @@ static struct clk_rcg prefix##_osr_src = {			\
 static const char * const lcc_##prefix##_parents[] = {		\
 	#prefix "_osr_src",					\
 };								\
-								\
+
+#define CLK_AIF_OSR_CLK(prefix, _ns, hr, en_bit)		\
 static struct clk_branch prefix##_osr_clk = {			\
 	.halt_reg = hr,						\
 	.halt_bit = 1,						\
 	.halt_check = BRANCH_HALT_ENABLE,			\
 	.clkr = {						\
 		.enable_reg = _ns,				\
-		.enable_mask = BIT(21),				\
+		.enable_mask = BIT(en_bit),			\
 		.hw.init = &(struct clk_init_data){		\
 			.name = #prefix "_osr_clk",		\
 			.parent_names = lcc_##prefix##_parents,	\
@@ -245,11 +141,12 @@ static struct clk_branch prefix##_osr_clk = {			\
 		},						\
 	},							\
 };								\
-								\
+
+#define CLK_AIF_OSR_DIV_CLK(prefix, _ns, _width)		\
 static struct clk_regmap_div prefix##_div_clk = {		\
 	.reg = _ns,						\
 	.shift = 10,						\
-	.width = 8,						\
+	.width = _width,					\
 	.clkr = {						\
 		.hw.init = &(struct clk_init_data){		\
 			.name = #prefix "_div_clk",		\
@@ -259,14 +156,15 @@ static struct clk_regmap_div prefix##_div_clk = {		\
 		},						\
 	},							\
 };								\
-								\
+
+#define CLK_AIF_OSR_BIT_DIV_CLK(prefix, _ns, hr, en_bit)	\
 static struct clk_branch prefix##_bit_div_clk = {		\
 	.halt_reg = hr,						\
 	.halt_bit = 0,						\
 	.halt_check = BRANCH_HALT_ENABLE,			\
 	.clkr = {						\
 		.enable_reg = _ns,				\
-		.enable_mask = BIT(19),				\
+		.enable_mask = BIT(en_bit),			\
 		.hw.init = &(struct clk_init_data){		\
 			.name = #prefix "_bit_div_clk",		\
 			.parent_names = (const char *[]){	\
@@ -278,10 +176,11 @@ static struct clk_branch prefix##_bit_div_clk = {		\
 		},						\
 	},							\
 };								\
-								\
+
+#define CLK_AIF_OSR_BIT_CLK(prefix, _ns, _shift)		\
 static struct clk_regmap_mux prefix##_bit_clk = {		\
 	.reg = _ns,						\
-	.shift = 18,						\
+	.shift = _shift,					\
 	.width = 1,						\
 	.clkr = {						\
 		.hw.init = &(struct clk_init_data){		\
@@ -295,7 +194,20 @@ static struct clk_regmap_mux prefix##_bit_clk = {		\
 			.flags = CLK_SET_RATE_PARENT,		\
 		},						\
 	},							\
-}
+};
+
+CLK_AIF_OSR_SRC(mi2s, 0x48, 0x4c)
+CLK_AIF_OSR_CLK(mi2s, 0x48, 0x50, 17)
+CLK_AIF_OSR_DIV_CLK(mi2s, 0x48, 4)
+CLK_AIF_OSR_BIT_DIV_CLK(mi2s, 0x48, 0x50, 15)
+CLK_AIF_OSR_BIT_CLK(mi2s, 0x48, 14)
+
+#define CLK_AIF_OSR_DIV(prefix, _ns, _md, hr)			\
+	CLK_AIF_OSR_SRC(prefix, _ns, _md)			\
+	CLK_AIF_OSR_CLK(prefix, _ns, hr, 21)			\
+	CLK_AIF_OSR_DIV_CLK(prefix, _ns, 8)			\
+	CLK_AIF_OSR_BIT_DIV_CLK(prefix, _ns, hr, 19)		\
+	CLK_AIF_OSR_BIT_CLK(prefix, _ns, 18)
 
 CLK_AIF_OSR_DIV(codec_i2s_mic, 0x60, 0x64, 0x68);
 CLK_AIF_OSR_DIV(spare_i2s_mic, 0x78, 0x7c, 0x80);
-- 
2.35.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux