Le 21/06/2022 à 15:14, Tomer Maimon a écrit :
Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller which
generates and supplies clocks to all modules within the BMC.
Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx>
---
drivers/clk/Kconfig | 6 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-npcm8xx.c | 594 ++++++++++++++++++++++++++++++++++++++
3 files changed, 601 insertions(+)
create mode 100644 drivers/clk/clk-npcm8xx.c
[...]
+static int npcm8xx_clk_probe(struct platform_device *pdev)
+{
+ struct clk_hw_onecell_data *npcm8xx_clk_data;
+ struct device *dev = &pdev->dev;
+ void __iomem *clk_base;
+ struct clk_hw *hw;
+ int i;
+
+ npcm8xx_clk_data = devm_kzalloc(dev, struct_size(npcm8xx_clk_data, hws,
+ NPCM8XX_NUM_CLOCKS),
+ GFP_KERNEL);
+ if (!npcm8xx_clk_data)
+ return -ENOMEM;
+
+ clk_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(clk_base))
+ return PTR_ERR(clk_base);
+
+ npcm8xx_clk_data->num = NPCM8XX_NUM_CLOCKS;
+
+ for (i = 0; i < NPCM8XX_NUM_CLOCKS; i++)
+ npcm8xx_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
+
+ /* Reference 25MHz clock */
+ hw = clk_hw_register_fixed_rate(dev, "refclk", NULL, 0, NPCM8XX_REF_CLK);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ npcm8xx_clk_data->hws[NPCM8XX_CLK_REFCLK] = hw;
+
+ /* Register plls */
+ for (i = 0; i < ARRAY_SIZE(npcm8xx_plls); i++) {
+ const struct npcm8xx_clk_pll_data *pll_data = &npcm8xx_plls[i];
+
+ hw = npcm8xx_clk_register_pll(dev, clk_base + pll_data->reg,
+ pll_data->name,
+ pll_data->parent_name,
+ pll_data->flags);
+ if (IS_ERR(hw)) {
+ dev_err(dev, "npcm8xx_clk: Can't register pll\n");
+ goto unregister_refclk;
goto err_mux_clk?
(so that we unregister what has already been registered in the loop ;
and unregister_refclk becomes useless)
+ }
+
+ if (pll_data->onecell_idx >= 0)
+ npcm8xx_clk_data->hws[pll_data->onecell_idx] = hw;
+ }
+
+ /* Register fixed dividers */
+ hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL1_DIV2,
+ NPCM8XX_CLK_S_PLL1, 0, 1, 2);
+ if (IS_ERR(hw)) {
+ dev_err(dev, "npcm8xx_clk: Can't register fixed div\n");
+ goto unregister_refclk;
+ }
+
+ hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL2_DIV2,
+ NPCM8XX_CLK_S_PLL2, 0, 1, 2);
+ if (IS_ERR(hw)) {
+ dev_err(dev, "npcm8xx_clk: Can't register pll div2\n");
+ goto unregister_refclk;
+ }
+
+ hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PRE_CLK,
+ NPCM8XX_CLK_S_CPU_MUX, 0, 1, 2);
+ if (IS_ERR(hw)) {
+ dev_err(dev, "npcm8xx_clk: Can't register ckclk div2\n");
+ goto unregister_refclk;
+ }
+
+ hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_AXI,
+ NPCM8XX_CLK_S_TH, 0, 1, 2);
+ if (IS_ERR(hw)) {
+ dev_err(dev, "npcm8xx_clk: Can't register axi div2\n");
+ goto unregister_refclk;
+ }
+
+ hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_ATB,
+ NPCM8XX_CLK_S_AXI, 0, 1, 2);
+ if (IS_ERR(hw)) {
+ dev_err(dev, "npcm8xx_clk: Can't register atb div2\n");
+ goto unregister_refclk;
+ }
+
+ /* Register clock dividers specified in npcm8xx_divs */
+ for (i = 0; i < ARRAY_SIZE(npcm8xx_divs); i++) {
+ const struct npcm8xx_clk_div_data *div_data = &npcm8xx_divs[i];
+
+ hw = devm_clk_hw_register_divider(dev, div_data->name,
+ div_data->parent_name,
+ div_data->flags,
+ clk_base + div_data->reg,
+ div_data->shift,
+ div_data->width,
+ div_data->clk_divider_flags,
+ &npcm8xx_clk_lock);
+ if (IS_ERR(hw)) {
+ dev_err(dev, "npcm8xx_clk: Can't register div table\n");
+ goto unregister_refclk;
+ }
+
+ if (div_data->onecell_idx >= 0)
+ npcm8xx_clk_data->hws[div_data->onecell_idx] = hw;
+ }
+
+ /* Register muxes */
+ for (i = 0; i < ARRAY_SIZE(npcm8xx_muxes); i++) {
+ const struct npcm8xx_clk_mux_data *mux_data = &npcm8xx_muxes[i];
+
+ hw = clk_hw_register_mux_table(dev, mux_data->name,
+ mux_data->parent_names,
+ mux_data->num_parents,
+ mux_data->flags,
+ clk_base + NPCM8XX_CLKSEL,
+ mux_data->shift,
+ mux_data->mask, 0,
+ mux_data->table,
+ &npcm8xx_clk_lock);
+
+ if (IS_ERR(hw)) {
+ dev_err(dev, "npcm8xx_clk: Can't register mux\n");
+ goto err_mux_clk;
+ }
+
+ if (mux_data->onecell_idx >= 0)
+ npcm8xx_clk_data->hws[mux_data->onecell_idx] = hw;
+ }
+
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ npcm8xx_clk_data);
If this fails, I think we should also "goto err_mux_clk;"
+
+err_mux_clk:
+ while (i--) {
+ if (npcm8xx_muxes[i].onecell_idx >= 0)
+ clk_hw_unregister_mux(npcm8xx_clk_data->hws[npcm8xx_muxes[i].onecell_idx]);
+ }
+unregister_refclk:
+ clk_hw_unregister(npcm8xx_clk_data->hws[NPCM8XX_CLK_REFCLK]);
+ return PTR_ERR(hw);
+}
Does a .remove() function is needed to match this error handling path?
(or use devm_add_action_or_reset())?
CJ
+
+static const struct of_device_id npcm8xx_clk_dt_ids[] = {
+ { .compatible = "nuvoton,npcm845-clk", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, npcm8xx_clk_dt_ids);
+
+static struct platform_driver npcm8xx_clk_driver = {
+ .probe = npcm8xx_clk_probe,
+ .driver = {
+ .name = "npcm8xx_clk",
+ .of_match_table = npcm8xx_clk_dt_ids,
+ },
+};
+
+static int __init npcm8xx_clk_driver_init(void)
+{
+ return platform_driver_register(&npcm8xx_clk_driver);
+}
+arch_initcall(npcm8xx_clk_driver_init);
+
