Hi Eugen, On 22/06/2022 14:25, Eugen.Hristev@xxxxxxxxxxxxx wrote: > On 6/22/22 2:53 PM, Hans Verkuil wrote: >> Hi Eugen, >> >> On 03/05/2022 11:51, Eugen Hristev wrote: >>> This series is a split from the series : >>> [PATCH v9 00/13] media: atmel: atmel-isc: implement media controller >>> and it includes the media controller part. >>> previous fixes were sent on a different patch series. >>> >>> As discussed on the ML, moving forward with having the media link validate at >>> start/stop streaming call. >>> I will test the patch : >>> [RFC PATCHv2] vb2: add support for (un)prepare_streaming queue ops >>> afterwards, but that patch requires moving my logic to the new vb2 callbacks. >> >> I'm looking at merging this series, but I would like to have the output of >> 'v4l2-compliance -m /dev/mediaX' to verify that the MC links etc. is all >> correct. > > Hello Hans, > > Please have a look at attached file . Unless you want me to add the > whole output to the e-mail ? No, this is fine, thank you! > > I also added output of media-ctl -p for your convenience. > the subdev2 is a device and driver that is not upstream and has some > compliance issues, they are reported by the v4l2-compliance tool, but > they should not affect this series, it's a synopsys driver that was > rejected on mainline a few years ago, I took it for internal usage, but > it's not cleaned up nor worked a lot upon. OK, good to know. >From the compliance output: v4l2-compliance 1.22.1, 32 bits, 32-bit time_t This is an old v4l2-compliance version. Compile it directly from the v4l-utils git repo and check the output again. Compliance test for atmel_isc_commo device /dev/media0: As you can see, the driver name is cut off. Isn't 'atmel-isc' a better name? > >> >> And one more question which may have been answered already in the past: >> >> Changing to the MC will break existing applications, doesn't it? Or did I >> miss something? >> > > The existing applications will have to configure the pipeline now. It > will no longer work by configuring just the top video node /dev/video0 . > They would have to use media-ctl for it, something similar with this set > of commands: > > media-ctl -d /dev/media0 --set-v4l2 '"imx219 > 1-0010":0[fmt:SRGGB10_1X10/1920x1080]' > media-ctl -d /dev/media0 --set-v4l2 > '"dw-csi.0":0[fmt:SRGGB10_1X10/1920x1080]' > media-ctl -d /dev/media0 --set-v4l2 '"csi2dc":0[fmt:SRGGB10_1X10/1920x1080]' > media-ctl -d /dev/media0 --set-v4l2 > '"atmel_isc_scaler":0[fmt:SRGGB10_1X10/1920x1080]' I'd like to see this documented in a new Documentation/admin-guide/media/atmel-isc.rst file. That can be a new patch. Regards, Hans > > Thank you for taking care of this ! > > Eugen > >> Regards, >> >> Hans >> >>> >>> Full series history: >>> >>> Changes in v10: >>> -> split the series into this first fixes part. >>> -> moved IO_MC addition from first patch to the second patch on the driver changes >>> -> edited commit messages >>> -> DT nodes now disabled by default. >>> >>> Changes in v9: >>> -> kernel robot reported isc_link_validate is not static, changed to static. >>> >>> Changes in v8: >>> -> scaler: modified crop bounds to have the exact source size >>> >>> Changes in v7: >>> -> scaler: modified crop bounds to have maximum isc size >>> -> format propagation: did small changes as per Jacopo review >>> >>> >>> Changes in v6: >>> -> worked a bit on scaler, added try crop and other changes as per Jacopo review >>> -> worked on isc-base enum_fmt , reworked as per Jacopo review >>> >>> Changes in v5: >>> -> removed patch that removed the 'stop' variable as it was still required >>> -> added two new trivial patches >>> -> reworked some parts of the scaler and format propagation after discussions with Jacopo >>> >>> >>> Changes in v4: >>> -> as reviewed by Hans, added new patch to remove the 'stop' variable and reworked >>> one patch that was using it >>> -> as reviewed by Jacopo, reworked some parts of the media controller implementation >>> >>> >>> Changes in v3: >>> - change in bindings, small fixes in csi2dc driver and conversion to mc >>> for the isc-base. >>> - removed some MAINTAINERS patches and used patterns in MAINTAINERS >>> >>> Changes in v2: >>> - integrated many changes suggested by Jacopo in the review of the v1 series. >>> - add a few new patches >>> >>> Eugen Hristev (5): >>> media: atmel: atmel-isc: prepare for media controller support >>> media: atmel: atmel-isc: implement media controller >>> ARM: dts: at91: sama7g5: add nodes for video capture >>> ARM: configs: at91: sama7: add xisc and csi2dc >>> ARM: multi_v7_defconfig: add atmel video pipeline modules >>> >>> arch/arm/boot/dts/sama7g5.dtsi | 51 ++ >>> arch/arm/configs/multi_v7_defconfig | 3 + >>> arch/arm/configs/sama7_defconfig | 2 + >>> drivers/media/platform/atmel/Makefile | 2 +- >>> drivers/media/platform/atmel/atmel-isc-base.c | 485 +++++++++--------- >>> .../media/platform/atmel/atmel-isc-scaler.c | 267 ++++++++++ >>> drivers/media/platform/atmel/atmel-isc.h | 50 +- >>> .../media/platform/atmel/atmel-sama5d2-isc.c | 34 +- >>> .../media/platform/atmel/atmel-sama7g5-isc.c | 32 +- >>> 9 files changed, 685 insertions(+), 241 deletions(-) >>> create mode 100644 drivers/media/platform/atmel/atmel-isc-scaler.c >>> >> >
