From: Johan Hovold <johan+linaro@xxxxxxxxxx>
Add an initial Lenovo Thinkpad X13s devicetree.
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
Changs since v1:
- New patch
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 393 ++++++++++++++++++
2 files changed, 394 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 2f416b84b71c..43053f1f6be9 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -91,6 +91,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
new file mode 100644
index 000000000000..58d3d8035751
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc8280xp.dtsi"
+#include "sc8280xp-pmics.dtsi"
+
+/ {
+ model = "Lenovo ThinkPad X13s";
+ compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp";
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pmc8280c_lpg 3 1000000>;
+ enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
+ power-supply = <&vreg_edp_bl>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+ };
+
+ vreg_edp_bl: edp-bl-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VBL9";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_bl_reg_en>;
+
+ regulator-boot-on;
+ };
+
+ vreg_misc_3p3: misc-3p3-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3B";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&misc_3p3_reg_en>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reserved-memory {
+ };
+};
+
+&apps_rsc {
+ pmc8280-1-rpmh-regulators {
+ compatible = "qcom,pm8350-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-l3-l5-supply = <&vreg_s11b>;
+
+ vreg_s11b: smps11 {
+ regulator-name = "vreg_s11b";
+ regulator-min-microvolt = <1272000>;
+ regulator-max-microvolt = <1272000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b: ldo3 {
+ regulator-name = "vreg_l3b";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-boot-on;
+ };
+
+ vreg_l4b: ldo4 {
+ regulator-name = "vreg_l4b";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l6b: ldo6 {
+ regulator-name = "vreg_l6b";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-boot-on;
+ regulator-always-on; // FIXME: VDD_A_EDP_0_0P9
+ };
+ };
+
+ pmc8280c-rpmh-regulators {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_l1c: ldo1 {
+ regulator-name = "vreg_l1c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l12c: ldo12 {
+ regulator-name = "vreg_l12c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l13c: ldo13 {
+ regulator-name = "vreg_l13c";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+ };
+
+ pmc8280-2-rpmh-regulators {
+ compatible = "qcom,pm8350-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-l4-supply = <&vreg_s11b>;
+
+ vreg_l3d: ldo3 {
+ regulator-name = "vreg_l3d";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l4d: ldo4 {
+ regulator-name = "vreg_l4d";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l7d: ldo7 {
+ regulator-name = "vreg_l7d";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l9d: ldo9 {
+ regulator-name = "vreg_l9d";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+ };
+};
+
+&pmc8280c_lpg {
+ status = "okay";
+};
+
+&pmk8280_pon_pwrkey {
+ status = "okay";
+};
+
+&qup0 {
+ status = "okay";
+};
+
+&qup0_i2c4 {
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup0_i2c4_default>, <&ts0_default>;
+
+ status = "okay";
+
+ /* FIXME: verify, missing on some x13s */
+ touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vreg_misc_3p3>;
+ };
+};
+
+&qup1 {
+ status = "okay";
+};
+
+&qup2 {
+ status = "okay";
+};
+
+&qup2_i2c5 {
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup2_i2c5_default>, <&kybd_default>, <&tpad_default>;
+
+ status = "okay";
+
+ touchpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+ hid-descr-addr = <0x20>;
+ interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vreg_misc_3p3>;
+ };
+
+ keyboard@68 {
+ compatible = "hid-over-i2c";
+ reg = <0x68>;
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vreg_misc_3p3>;
+ };
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sc8280xp/qcadsp8280.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_nsp0 {
+ firmware-name = "qcom/sc8280xp/qccdsp8280.mbn";
+
+ status = "okay";
+};
+
+&usb_0 {
+ status = "okay";
+};
+
+&usb_0_dwc3 {
+ /* TODO: Define USB-C connector properly */
+ dr_mode = "host";
+};
+
+&usb_0_hsphy {
+ vdda-pll-supply = <&vreg_l9d>;
+ vdda18-supply = <&vreg_l1c>;
+ vdda33-supply = <&vreg_l7d>;
+
+ status = "okay";
+};
+
+&usb_0_qmpphy {
+ vdda-phy-supply = <&vreg_l9d>;
+ vdda-pll-supply = <&vreg_l4d>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ /* TODO: Define USB-C connector properly */
+ dr_mode = "host";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l4b>;
+ vdda18-supply = <&vreg_l1c>;
+ vdda33-supply = <&vreg_l13c>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l4b>;
+ vdda-pll-supply = <&vreg_l3b>;
+
+ status = "okay";
+};
+
+&xo_board_clk {
+ clock-frequency = <38400000>;
+};
+
+/* PINCTRL - additions to nodes defined in sc8280xp.dtsi */
+
+&pmc8280_1_gpios {
+ edp_bl_en: edp-bl-en-state {
+ pins = "gpio8";
+ function = "normal";
+ };
+
+ edp_bl_reg_en: edp-bl-reg-en-state {
+ pins = "gpio9";
+ function = "normal";
+ };
+
+ misc_3p3_reg_en: misc-3p3-reg-en-state {
+ pins = "gpio1";
+ function = "normal";
+ };
+};
+
+&pmc8280c_gpios {
+ edp_bl_pwm: edp-bl-pwm-state {
+ pins = "gpio8";
+ function = "func1";
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
+
+ kybd_default: kybd-default-state {
+ disable {
+ pins = "gpio102";
+ function = "gpio";
+ output-low;
+ };
+
+ int-n {
+ pins = "gpio104";
+ function = "gpio";
+ bias-disable;
+ };
+
+ reset {
+ pins = "gpio105";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ qup0_i2c4_default: qup0-i2c4-default-state {
+ pins = "gpio171", "gpio172";
+ function = "qup4";
+
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ qup2_i2c5_default: qup2-i2c5-default-state {
+ pins = "gpio81", "gpio82";
+ function = "qup21";
+
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ tpad_default: tpad-default-state {
+ int-n {
+ pins = "gpio182";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ ts0_default: ts0-default-state {
+ int-n {
+ pins = "gpio175";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ reset-n {
+ pins = "gpio99";
+ function = "gpio";
+ output-high;
+ drive-strength = <16>;
+ };
+ };
+};
--
2.35.1
