Re: [PATCH 1/2] arm64: dts: apple: Re-parent ANS2 power domains

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/06/2022 02.42, Sven Peter wrote:
> From: Hector Martin <marcan@xxxxxxxxx>
> 
> Turns out that the APCIE_ST*_SYS domains do hard-depend on ANS2, so
> without this they refuse to power up.
> 
> Signed-off-by: Hector Martin <marcan@xxxxxxxxx>
> Reviewed-by: Sven Peter <sven@xxxxxxxxxxxxx>
> Signed-off-by: Sven Peter <sven@xxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/apple/t8103-pmgr.dtsi | 7 +------
>  1 file changed, 1 insertion(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
> index fc51bc872468..a6dbb1f485d8 100644
> --- a/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
> +++ b/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
> @@ -725,11 +725,6 @@ ps_ans2: power-controller@3f0 {
>  		#power-domain-cells = <0>;
>  		#reset-cells = <0>;
>  		label = "ans2";
> -		/*
> -		 * The ADT makes ps_apcie_st depend on ps_ans2 instead, but this
> -		 * doesn't make much sense since ANS2 uses APCIE_ST.
> -		 */
> -		power-domains = <&ps_apcie_st>;
>  	};
>  
>  	ps_gfx: power-controller@3f8 {
> @@ -836,7 +831,7 @@ ps_apcie_st: power-controller@418 {
>  		#power-domain-cells = <0>;
>  		#reset-cells = <0>;
>  		label = "apcie_st";
> -		power-domains = <&ps_apcie>;
> +		power-domains = <&ps_apcie>, <&ps_ans2>;
>  	};
>  
>  	ps_ane_sys: power-controller@470 {

Applied both patches to asahi-soc/dt. Thanks!

-- 
Hector Martin (marcan@xxxxxxxxx)
Public Key: https://mrcn.st/pub



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux