Hi Scott, On 09/25/2014 02:04 PM, Scott Branden wrote: > Hi Matt/Christian (and others), > > We would like to move forward in getting our base Cygnus support into > the mainline kernel. From there we will be able to contribute > additional drivers. > > Is somebody willing to accept this pull request to get this patchset > accepted by the open source community? I am fine with taking the ARM patches and putting them at http://github/brcm/linux.git, with C code in cygnus/board and the Device Tree files in cygnus/dt for instance? The clock driver patch will have to go through Mike Turquette's tree unless he wants to delegate that one. > > Regards, > Scott > > > On 14-09-23 02:17 PM, Jonathan Richardson wrote: >> Hi, >> >> This patchset contains initial support for Broadcom's Cygnus SoC based >> on our >> iProc architecture. Initial support is minimal and includes just the mach >> platform code, clock driver, and a basic device tree configuration. >> Peripheral >> drivers will be submitted soon, as will device tree configurations for >> other >> Cygnus board variants. >> >> Changes from v1: >> - Address code review comments as per previous responses. >> - Copyright headers updated to remove Broadcom URL. >> - mach platform code still contains hard coded adresses. These >> address are >> the same for all Cygnus variants. Could you please provide >> guidance on where >> they should go if you would still like them changed. >> >> Thanks, >> Jon >> >> Jonathan Richardson (6): >> ARM: cygnus: Initial support for Broadcom Cygnus SoC >> clk: Clock driver support for Broadcom Cygnus SoC >> dt-bindings: Document Broadcom Cygnus SoC and clock driver >> ARM: dts: Enable Broadcom Cygnus SoC >> ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC >> MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock >> drivers >> >> Documentation/devicetree/bindings/arm/cygnus.txt | 12 + >> .../devicetree/bindings/clock/clk-cygnus.txt | 121 ++ >> .../devicetree/bindings/clock/clk-iproc.txt | 48 + >> MAINTAINERS | 21 + >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/bcm-cygnus.dtsi | 349 ++++++ >> arch/arm/boot/dts/bcm911360_entphn.dts | 22 + >> arch/arm/configs/bcm_cygnus_defconfig | 223 ++++ >> arch/arm/mach-bcm/Kconfig | 31 + >> arch/arm/mach-bcm/Makefile | 3 + >> arch/arm/mach-bcm/bcm_cygnus.c | 166 +++ >> drivers/clk/Makefile | 1 + >> drivers/clk/bcm/Makefile | 2 + >> drivers/clk/bcm/clk-cygnus.c | 1186 >> ++++++++++++++++++++ >> drivers/clk/bcm/clk-iproc.c | 451 ++++++++ >> 15 files changed, 2637 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/arm/cygnus.txt >> create mode 100644 >> Documentation/devicetree/bindings/clock/clk-cygnus.txt >> create mode 100644 >> Documentation/devicetree/bindings/clock/clk-iproc.txt >> create mode 100644 arch/arm/boot/dts/bcm-cygnus.dtsi >> create mode 100644 arch/arm/boot/dts/bcm911360_entphn.dts >> create mode 100644 arch/arm/configs/bcm_cygnus_defconfig >> create mode 100644 arch/arm/mach-bcm/bcm_cygnus.c >> create mode 100644 drivers/clk/bcm/clk-cygnus.c >> create mode 100644 drivers/clk/bcm/clk-iproc.c >> > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html