On 18/06/2022 08:50, ChiYuan Huang wrote: > Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> 於 2022年6月18日 週六 上午9:45寫道： >> >> On 17/06/2022 02:32, cy_huang wrote: >>> From: ChiYuan Huang <cy_huang@xxxxxxxxxxx> >>> >>> Add the documentation for Richtek RTQ6056. >>> >>> Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx> >>> --- >>> .../bindings/iio/adc/richtek,rtq6056-adc.yaml | 57 ++++++++++++++++++++++ >>> 1 file changed, 57 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/iio/adc/richtek,rtq6056-adc.yaml >>> >>> diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056-adc.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056-adc.yaml >>> new file mode 100644 >>> index 00000000..6b4e0e0 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056-adc.yaml >>> @@ -0,0 +1,57 @@ >>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) >>> +%YAML 1.2 >>> +--- >>> +$id: http://devicetree.org/schemas/iio/adc/richtek,rtq6056-adc.yaml# >>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>> + >>> +title: RTQ6056 Bi-Directional Current and Power Monitor with 16-bit ADC >>> + >>> +maintainers: >>> + - ChiYuan Huang <cy_huang@xxxxxxxxxxx> >>> + >>> +description: | >>> + The RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus >>> + interface, and the device provides full information for system by reading >>> + out the loading current and power. >>> + >>> + The device monitors both of the drops across sense resistor and the BUS >>> + voltage, converts into the current in amperes, and power in watts through >>> + internal analog-to-digital converter ADC. The programmable calibration, >>> + adjustable conversion time, and averaging function are also built in for >>> + more design flexibility. >>> + >>> + Datasheet is available at >>> + https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf >>> + >>> +properties: >>> + compatible: >>> + const: richtek,rtq6056 >>> + >>> + reg: >>> + maxItems: 1 >>> + >>> + "#io-channel-cells": >>> + const: 1 >>> + >>> + richtek,shunt-resistor-uohm: >> >> Use standard properties, so "-micro-ohms". Drop the unit from >> description and drop the ref. >> > Use richtek.shunt-resistor-micro-ohms? Yes. > Or the prefix 'richtek,' can be removed? No, the vendor prefix must stay. Best regards, Krzysztof
